We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byPriscila Maddocks
Modified over 3 years ago
Long HQ coil drawings now available 1 Miao Yu
Dead voltage taps in TQ/LQ/HQ coils Inner layer: 24, outer layer: 12 (33 inner/23 outer per coil for TQ/LQ/HQ) Pole-turn: 27, splice & mid-plane: 9 (34 pole-turn/22 splice & mid-plane) 2
LHQ voltage taps: L1/LE 3 A1A1 A2A2 A3A3 A5A5 A6A6 A4A4 A9A9 Inner surface
LHQ voltage taps: L1/LE 4 A3A3 A4A4 A6A6 HQ coil L1/LE A4A4
LHQ voltage taps: L1/RE 5 A7A7 A8A8 Inner surface
LHQ voltage taps: L1 6 A1/A2 A3A3A5A5 A7A7 A9A9A8A8 A6A6 A4A4 Inner surface
LHQ voltage taps: L2/LE 7 B1B1 B2 B3 B5 B8 B4 Outer surface
LHQ voltage taps: L2/LE 8 B3 B4 B5 HQ coil L2/LE Narrow strip of stainless-steel foil could be used for B4 in a straight section B4
LHQ voltage taps: L2/RE 9 B6 B7 Outer surface
LHQ voltage taps: L2 10 B1/B2 B3 B6 B8 B4 B7 B5 Outer surface
Backup Slides 11
SS foil connected to the VT in TQ coil/L2 12
Proposal for LHQ B4 trace routing and distributed resistance heater : LE routing 13 M. Marchevsky
LQ voltage taps
HQ voltage taps
TQ voltage taps
May 9, 2012D. R. Dietderich, LARP CM-18 Cable Fabrication Plans and Experience D.R. Dietderich Lawrence Berkeley National Laboratory bnl - fnal- lbnl -
The HiLumi LHC Design Study (a sub-system of HL-LHC) is co-funded by the European Commission within the Framework Programme 7 Capacities Specific Programme,
Coil HQ-03 CMM measurements R. Bossert Dec. 2, 2010.
Proposal for HQ Coil 27 Miao Yu, Steve Krave. What to do with the coil Laser sintering end parts with accordion slits Plasma coating these end parts Demonstrate.
LQ Reaction & Impregnation Tooling Internal Review F. Nobrega, N. Andreev May 7, 2007.
LQ Reaction & Impregnation Tooling Internal Review F. Nobrega, N. Andreev August 13, 2007.
LHQ Coil 02 Winding and Curing Plan Miao Yu 03/21/13.
LHQ Coil 1 OL Curing LHQ Coil 1 Shipping Miao Yu 02/28/2013.
HQ Coil 18 Test Impregnation LARP Video Meeting November 21, 2013 Dan Cheng.
LHQ Curing Mold Simulation Analysis Miao Yu Fermilab 08/02/2011.
Objective: To be able to find the product of two binomials. Objective: To be able to find the product of two binomials. 8.7 Multiplying Polynomials Part.
SQXF Coil 2 Impregnation Status & Plan Fred Nobrega 09/09/2014.
1 QXF heater proposal M. Marchevsky, H. Felice, T. Salmi, D. Cheng, G. Sabbi, LBNL.
Curing Mold Laminations Miao Yu 05/17/2012. QC on the cross-section 30/30 samples before production 16/500 samples during production 2.
SQXF 25 m Cable Practice Winding at LBNL Miao Yu Dan Cheng 10/31/2013.
LHQ Coil Fabrication Experience and Plan Miao Yu 04/08/2013.
ASC 2012, 10/10/2012Test results and analysis of LQS03 – G. Ambrosio 1 BNL - FNAL - LBNL - SLAC Test Results and Analysis of LQS03 Third Long Nb 3 Sn Quadrupole.
HQ Coil 23 and 25 Status LARP Video Meeting September 19, 2013 Dan Cheng.
Coil parts & Instrumentation issues for LQ/HQ coils tested at Fermilab HQ/LHQ coil parts task force.
1 QXF heater design: current status and the path forward M. Marchevsky (LBNL) 03/06/2014 D.W. Cheng, H. Felice, G. Sabbi (LBNL), G. Ambrosio (FNAL)
© 2019 SlidePlayer.com Inc. All rights reserved.