Presentation on theme: "26/05/2011 Philippe Schwemling – Didier Laporte New Pixels mechanics discussion Since Atlas upgrade week."— Presentation transcript:
26/05/2011 Philippe Schwemling – Didier Laporte New Pixels mechanics discussion Since Atlas upgrade week
26/05/2011 Evolution of the X0 measurement method CAD plug in developped for Catia with IBM : Cost : € HT Evolutions wrt previous technique Reduced processing time Increased precision (no need any more to use intermediate bitmap cutouts) Increased level of details Simpler to use, no need of complicated and manual procedure to define cutout views
Some considerations on the principle of the X/X0 measurement method Method is not intended to replace G4. Material amount is measured only along straight lines In principle, helixes could be envisaged, but we wanted to keep it simple No consideration of multiple scattering effects along tracks Aim is to have a way to compare quickly designs and objects, staying as close as possible to the CAD reality. 26/05/2011
Example : CAD model from Neal
26/05/2011 Results mm Angle
26/05/2011 Conclusion Plug-in already tested on a few known designs First attempts show that it is very easy to analyze new designs under Catia This work will be much faster than in the past.