Presentation is loading. Please wait.

Presentation is loading. Please wait.

Susana Izquierdo Bermudez, on behalf of the winding team. 04-02-2014.

Similar presentations


Presentation on theme: "Susana Izquierdo Bermudez, on behalf of the winding team. 04-02-2014."— Presentation transcript:

1 Susana Izquierdo Bermudez, on behalf of the winding team

2 Susana Izquierdo Bermudez 2 V3-IC1: Easy to place, nothing done on the spacer (it was slightly broken [1]) V3-IR1: The spacer gets in contact with the cable in [2], lower edge. A bit of material was removed and the corners were rounded V3-IC2: Easy to place, corners rounded V3-IC3: Corners slightly rounded (negligible material removal) V3-IR2: The spacer wets in contact with the cable in [3], lower edge. A bit of material was removed and the corners were rounded V3-IC4: No material removed. V3-IR3: No material removed

3 Susana Izquierdo Bermudez Winding IL 3 Broken V3-IC1: Easy to place, nothing done on the spacer (it was slightly broken) V3-IC2: Easy to place, corners rounded

4 Susana Izquierdo Bermudez Winding IL 4 V3-IR1: The spacer wets in contact with the lower edge of the cable. A bit of material was removed and the corners were rounded 4 V3-IC3: Corners slightly rounded (negligible material removal)

5 Susana Izquierdo Bermudez Winding IL 5 V3-IR2: The spacer wets in contact with the cable in the lower edge. A bit of material was removed and the corners were rounded V3-IC4 No material removed. Non-negligible gap but it seems to be because we are not pushing enough the coil in the mid-plane (the surface of the spacer ≈ parallel to the cable)

6 Susana Izquierdo Bermudez V3-IR3: No material removed. Non-negligible gap but it seems to be because we are not pushing enough the coil in the mid-plane (the surface of the spacer ≈ parallel to the cable) Winding IL General Overview lead end before curing

7 Susana Izquierdo Bermudez IL, outer radius after curing 7 Small gaps except in the end saddle

8 Susana Izquierdo Bermudez IL, inner radius after curing 8 Big gaps…the coil is not compacted enough during curing?

9 Susana Izquierdo Bermudez 9 IL, inner radius after curing

10 Susana Izquierdo Bermudez Winding OL 10 V3-OC1:No material removed V3-OR1:No material removed

11 Susana Izquierdo Bermudez 11 V3-OC2:Corners rounded Winding OL V3-OR2:Corners rounded

12 Susana Izquierdo Bermudez 12 Winding OL V3-OC3:Corners rounded on the wedge side, very easy to place V3-OR4 No material removed. Non-negligible gap but it seems to be because we are not pushing enough the coil in the mid-plane (the surface of the spacer ≈ parallel to the cable)

13 Susana Izquierdo Bermudez 13 V3-OC4 No material removed. Non-negligible gap but it seems to be because we are not pushing enough the coil in the mid-plane (the surface of the spacer ≈ parallel to the cable) Winding OL

14 Susana Izquierdo Bermudez 14 OL, outer radius after curing

15 Susana Izquierdo Bermudez 15 OL, outer radius after curing

16 Susana Izquierdo Bermudez Flexibility compatible with spacer clamping 16


Download ppt "Susana Izquierdo Bermudez, on behalf of the winding team. 04-02-2014."

Similar presentations


Ads by Google