We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byHaley Broadley
Modified about 1 year ago
Advanced Machine Company © Advanced Machine Company 1 © Advanced Machine Company Company Presentation
Advanced Machine Company © Advanced Machine Company 2 © Storgt. 74, N-3321 Vestfossen, Norway AMC AS is located in Vestfossen and we have 1000 m 2 office and production facilities. We cooperate with a number of local companies and can therefore offer turn-key solutions to our customers. Phone: /
Advanced Machine Company © Advanced Machine Company 3 © Our location: Follow E34 from Hokksund and drive in direction of Kongsberg. Take first exit after Hokksund. Follow roadsigns to Vestfossen. We are located on the right hand side in the second crossing in the centre of Vestfossen.
Advanced Machine Company © Advanced Machine Company 4 © Your future partner ! The company was established early in We have serviced a number of medium and large companies, see the refrence list. More than 60 years of experience is within our company. Computers with 3D design software, programming software and other office related software are used. We deliver services based on standard hourly rates or fixed project costs depending on customers requirements.
Advanced Machine Company © Advanced Machine Company 5 © Job types: AMC quotes the following type of work: ● Design and production of machines and production lines, ● Mechanical and Industrial Engineering, ● Project planning, commissioning and supervision, ● Project Management, ● Installation, ramp-up support, training, service and maintenance. ● Control Cabinets and Panels for Industry, ● Cabinets in Stainless Steel, customer specified, ● Connection and programming of PLCs and pneumatics, ● Frequency Converters, Motor Controls and Servo Systems, ● PLC (Programmable Logic Controllers), ● BUS-connections, Safety Circuits and Safety Relays, ● Machining and TIG-welding (thin-plate / stainless steel),
Advanced Machine Company © Advanced Machine Company 6 © ATF: Automatic rollcontainer handling BTD: Automatic tray handling Equipment for automatic handling of rollcontainers and trays: Products:
Advanced Machine Company © Advanced Machine Company 7 © Equipment for automatic transport of rollcontainers and trays: BTL: Automatic lift for trays CL: Automatic lift for rollcontainers Products:
Advanced Machine Company © Advanced Machine Company 8 © BTW: Automatic cleaning system for trays Equipment for automatic cleaning of rollcontainers and trays: Products: CW: Automatic cleaning system for rollcontainers
Advanced Machine Company © Advanced Machine Company 9 © T: Automatic Tray Packer 2 Product lanes Equipment for automatic placement of products into trays: Products: TP4: Automatic Tray Packer 1 Product lane
Advanced Machine Company © Advanced Machine Company 10 © Equipment for automatic placement of products into rollcontainers: Products: CF-82M: Manually loaded Container Packer CF-82: Automatic Container Packer
Advanced Machine Company © Advanced Machine Company 11 © Equipment for automatic turning or feeding of products: Products: BB-465: Belt Brake PT-20: Package Turner
Advanced Machine Company © Advanced Machine Company 12 © Equipment for automatic placement of cardboard support sheets: Products: SP 800: Automatic Cardboard Placer
Advanced Machine Company © Advanced Machine Company 13 © Equipment for automatic handling of products in trays: Products: TL 600: Automatic Tray Lift
Advanced Machine Company © Advanced Machine Company 14 © Conveyor systems for transport of rollcontainers and trays: Systems: Overhead Accumulating Conveyor for transport of rollcontainers:Tray turner: Turn Table for rollcontainers: Accumulating Conveyor for Trays:
Advanced Machine Company © Advanced Machine Company 15 © Systems for reloading of products in rollcontainers: Systems:
Advanced Machine Company © Advanced Machine Company 16 © Production, assembly and test of complete bag-filling plant: Systems:
Advanced Machine Company © Advanced Machine Company 17 © Control Systems: AMC delivers Control Systems from the following suppliers: ● ABB, ● Allan Bradley, ● GE-Fanuc, ● Mitsubishi, ● Omron, ● SATT, ● Siemens, ● Telemecanique.
Advanced Machine Company © Advanced Machine Company 18 © ●Cronus Engineering AS ●Dyno Nobel ASA ●Elopak AS ●Mills AS, division Delikat Fabrikker ●Mjørud Gruppen AS ●Nor-Reg Systems AS ●Optimove AS ●Robia ASA ●Teknisk Produksjon AS ●Tetra Pak Norge AS ●Tine Norske Meierier AS Reference list: Some of our references includes a number of well known companies in the food industry and machine producers:
Addition 1’s to
Addition Facts = = =
WEEK 1 You have 10 seconds to name…
Test B, 100 Subtraction Facts
Striving to exceed customer demands by delivering the best.
Bottoms Up Factoring. Start with the X-box 3-9 Product Sum
MULT. INTEGERS 1. IF THE SIGNS ARE THE SAME THE ANSWER IS POSITIVE 2. IF THE SIGNS ARE DIFFERENT THE ANSWER IS NEGATIVE.
SUBTRACTING INTEGERS 1. CHANGE THE SUBTRACTION SIGN TO ADDITION 2. TAKE THE INVERSE OF THE SECOND NUMBER 3. FOLLOW THE RULES FOR ADDITION 4. ADD THE OPPOSITE.
O X Click on Number next to person for a question.
Past Tense Probe Past Tense Probe – Practice 1 Past Tense Probe – Practice 2.
2 pt 3 pt 4 pt 5 pt 1 pt 2 pt 3 pt 4 pt 5 pt 1 pt 2 pt 3 pt 4 pt 5 pt 1 pt 2 pt 3 pt 4 pt 5 pt 1 pt 2 pt 3 pt 4 pt 5 pt 1 pt Time Money AdditionSubtraction.
CALDSTEEL PRESENTATION. METALWORK INDUSTRIAL PROJECTS ASSEMBLY INDUSTRIAL.
25 seconds left….. 24 seconds left….. 23 seconds left…..
DIVIDING INTEGERS 1. IF THE SIGNS ARE THE SAME THE ANSWER IS POSITIVE 2. IF THE SIGNS ARE DIFFERENT THE ANSWER IS NEGATIVE.
MEP201 Mechanical Engineering Drawing 1 st semester S R Kale Lecture Wiring Drawings.
Khaled Mostafa, ABB Electrical Industries, Nov New Trends in process Automation Power of Integration.
MACHINE TOOLS – I 1. Introduction Introduction Engine Lathe – Working Principle Engine Lathe – Working Principle Physical Construction Physical Construction.
Year 6 mental test 15 second questions Numbers and number system Numbers and the number system, Measures and Shape.
VISION STATEMENT To be a Leading, Dynamic, Result Oriented Company focused on providing Quality Solutions, Systems and Support To be consistent by improving.
© S Haughton more than 3?
Business Transaction Management Software for Application Coordination 1 Business Processes and Coordination.
Advanced Steel Manufacturing and Stamping Mike Smith BoronExtrication.com.
Welcome to Finger Lakes Conveyors Located on Route 414, in Waterloo, New York Introduction Shop Tour Shop Tour Welding Assembly Machining Engineering.
ADDING INTEGERS 1. POS. + POS. = POS. 2. NEG. + NEG. = NEG. 3. POS. + NEG. OR NEG. + POS. SUBTRACT TAKE SIGN OF BIGGER ABSOLUTE VALUE.
Jeopardy Topic 1Topic Q 1Q 6Q 11Q 16Q 21 Q 2Q 7Q 12Q 17Q 22 Q 3Q 8Q 13Q 18Q 23 Q 4Q 9Q 14Q 19Q 24 Q 5Q 10Q 15Q 20Q 25 Final Jeopardy.
Conveyor Control using PLC, VFD, and Sensor. Why Conveyor Control? A conveyor system is a common piece of mechanical handling equipment that moves materials.
Year 6 mental test 5 second questions Multiplication and Division Tables knowledge.
Beer equipment Beer equipment Other equipment Other equipment Inox tubes Inox tubes Production program – Oprema Intercom Production program – Oprema Intercom.
MULTIPLICATION EQUATIONS 1. SOLVE FOR X 3. WHAT EVER YOU DO TO ONE SIDE YOU HAVE TO DO TO THE OTHER 2. DIVIDE BY THE NUMBER IN FRONT OF THE VARIABLE.
MULTIPLYING MONOMIALS TIMES POLYNOMIALS (DISTRIBUTIVE PROPERTY)
FCX Performance, Inc.. The Power of One 2 World class flow control solutions built on over 100 years of experience FCX does not run businesses; we provide.
SIMOCODE-DP Software. Automation and Drives SIMOCODE-DP 3UF5 08/04 2 Protection Control Logic Communication SIMOCODE Software Communication Protection.
TWO STEP EQUATIONS 1. SOLVE FOR X 3. DIVIDE BY THE NUMBER IN FRONT OF THE VARIABLE 2. DO THE ADDITION STEP FIRST.
Mental Math Math Team Skills Test 20-Question Sample.
1 Mew Mechanical Safety Sweep & Brake for Mechanical Assist System Patent Pending!
We will resume in: 25 Minutes We will resume in: 24 Minutes.
ALGEBRAIC EXPRESSIONS Step 1 Write down the question Step 2 Plug in the numbers Step 3 Use PEMDAS Work down, Show all steps.
By D. Fisher Geometric Transformations. Reflection, Rotation, or Translation 1.
6/12/ DFS ABU DHABI STAFF ACCOMODATION.
Please read this before using presentation This presentation is based on content presented at the Mines Safety Roadshow.
1 LITOSTROJ RAVNE IS A MEMBER OF LITOSTROJ GROUP TRADITION, POWER QUALITY, INNOVATION Litostroj Ravne Ltd. Koroška cesta Ravne na Koroškem Slovenia.
We have proven ourselves as reliable partners in the fields of installing investment equipment in car industry and energy generation facilities. We are.
Equal or Not
EPSRC Power Electronics Centre Early Stage Researchers Meet up WP1.1 High Power DC-DC Converter Topologies Luiz Villa.
What we know (and don’t know) about MC supplies. Steve Gesuale PSI PEPFAR MC Partners Meeting May 2009.
Chapter 9 Capacity Decisions IDS 605 Spring 1999.
© 2017 SlidePlayer.com Inc. All rights reserved.