1. Disassemble, Assemble and Perform a Function Check on the M16/M4

2. Terminal Learning Objective
Action: Disassemble, Assemble and Perform a Function Check on the M16/M4 Series Rifle Conditions: Given a M16/M4 Rifle and a requirement to disassemble, assemble and perform a function check on the weapon Standards: Properly disassemble, assemble and perform a function check on the M16/M4 Series Rifle

3. Clear Weapon

4. Remove Sling

5. Remove Handguards

6. Push the Takedown Pin
Dummy Round

7. Push the Receiver Pivot Pin
Dummy Round

8. Separate Upper and Lower Receivers

9. Pull Charging Handle

10. Remove Bolt Carrier and Group

11. Remove Charging Handle

12. Remove Firing Pin Retaining Pin
Dummy Round

13. Remove Firing Pin

14. Remove Bolt Cam Pin

15. Remove Bolt Assembly

16. Remove Extractor and Spring
Dummy Round

17. Remove Buffer and Action Spring
Dummy Round

18. Install Buttstock Assembly

19. Reassemble the Bolt Carrier Group

20. Replace Charging Handle

21. Slide in Bolt Carrier Group

22. Engage Receiver Pivot Pin

23. Engage Takedown Pin

24. Replace Handguards

25. Replace Sling

26. Terminal Learning Objective
Action: Disassemble, Assemble and Perform a Function Check on the M16/M4 Series Rifle Conditions: Given a M16/M4 Rifle and a requirement to disassemble, assemble and perform a function check on the weapon Standards: Properly disassemble, assemble and perform a function check on the M16/M4 Series Rifle