Presentation is loading. Please wait.

Presentation is loading. Please wait.

Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 1 STEPPER BASICS Motor Dimensions IMS Motor Part Numbers Wiring Configurations 4,

Similar presentations


Presentation on theme: "Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 1 STEPPER BASICS Motor Dimensions IMS Motor Part Numbers Wiring Configurations 4,"— Presentation transcript:

1 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 1 STEPPER BASICS Motor Dimensions IMS Motor Part Numbers Wiring Configurations 4, 6 & 8 leaded Motors Full Step Control Half Step Control Microstepping Control

2 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 2 NEMA 14

3 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 3 NEMA 14 M-1410-0.75S 0.75 amps per phase S = Single shaft D = Dual shaft Approximately 1.0” long

4 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 4 NEMA 17

5 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 5 NEMA 17 M-1713-1.5S or D 1.5 amps per phase S = Single shaft D = Dual shaft Approximately 1.3” long M-1715-1.5S or D M-1719-1.5S or D

6 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 6 NEMA 23

7 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 7 NEMA 23 M-2218-2.4S or D 2.4 amps per phase S = Single shaft D = Dual shaft Approximately 1.8” long M-2222-2.4S or D M-2231-2.4S or D

8 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 8 NEMA 23 M-2218-3.0S or D 3.0 amps per phase S = Single shaft D = Dual shaft Approximately 1.8” long M-2222-3.0S or D M-2231-3.0S or D

9 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 9 NEMA 23 M-2218-6.0S or D 6.0 amps per phase S = Single shaft D = Dual shaft Approximately 1.8” long M-2222-6.0S or D M-2231-6.0S or D

10 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 10 NEMA 34

11 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 11 NEMA 34 M-3424-6.3S or D 6.3 amps per phase S = Single shaft D = Dual shaft Approximately 2.4” long M-3431-6.3S or D M-3447-6.3S or D

12 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 12 NEMA 42 M2-4247S or D S = Single shaft D = Dual shaft Approximately 4.7” long M2-4270S or D M2-4288S or D

13 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 13 Four Leaded Motor

14 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 14 Eight Leaded Series (Six leaded)

15 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 15 Eight Leaded Parallel

16 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 16 Full Step Sequence How does a stepper motor take a full step?

17 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 17 Full Step Mode (1 st Step)

18 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 18 Full Step Mode (2 nd Step)

19 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 19 Full Step Mode (3 rd Step)

20 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 20 Full Step Mode (4 th Step)

21 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 21 Full Step Mode (5 th Step)

22 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 22 Full Step Waveform

23 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 23 Half Step Sequence How does a stepper motor take a half step?

24 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 24 Half Step Mode (1 st Step)

25 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 25 Half Step Mode (2 nd Half Step)

26 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 26 Half Step Mode (3 rd Half Step)

27 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 27 Half Step Mode (4 th Half Step)

28 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 28 Half Step Mode (5 th Half Step)

29 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 29 Half Step Mode (6 th Half Step)

30 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 30 Half Step Mode (7 th Half Step)

31 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 31 Half Step Mode (8 th Half Step)

32 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 32 Half Step Mode (9 th Half Step)

33 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 33 Half Step Waveform

34 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 34 Micro Stepping

35 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 35 Micro Stepping Sequence How does a stepper motor take a micro step?

36 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 36 4 Micro Steps/Full Step

37 Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 37 Micro Stepping


Download ppt "Stepper Basics: Rev.09/04/2002 © 2002 Intelligent Motion Systems, Inc. 1 STEPPER BASICS Motor Dimensions IMS Motor Part Numbers Wiring Configurations 4,"

Similar presentations


Ads by Google