Presentation is loading. Please wait.

Presentation is loading. Please wait.

No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel :886-2-2678-7966 Fax:886-2-2678-0160 程式发展流程 Tonyluo.

Similar presentations


Presentation on theme: "No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel :886-2-2678-7966 Fax:886-2-2678-0160 程式发展流程 Tonyluo."— Presentation transcript:

1 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: 程式发展流程 Tonyluo

2 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax:

3 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: Circuit Generation Flow

4 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: CKTGEN ModeFunction CREATECreates a.CIR file from the entered component information in this mode, which can be used by GENERATE or REVISE. GENERATEGenerates a.CKT file from the.CIR file REVISEMakes changes to an existing.CIR database file READAccepts an existing.CKT file and produces a.CIR file that is used by REVISE and GENERATE mode. Use READ mode when a.CKT file needs to be changed and the corresponding CKTGEN database file (.CIR) file does not exist or cannot be located. ALLOCATE_ SPECIAL Use when.CKT is generated outside of CKTGEN. Compares component types used against system and user libraries and allocates special tester resources such as clock drivers, clock syncs and triggers required by models.

5 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: Describes circuit components and how they are connected. CircuitDescription file is separated into five sections: /* comments section */ %CIRCUIT, %GROUP,%VALUE,%ADAPTOR /* comments section */ Comments that identify the pc board for which the program was written. It is also recommended to use this section for keeping a record of any modifications made to the file. %CIRCUIT; Contains the Name, type and circuit connections of every component. R1 R CR1_A, Q1_B; %GROUP; This optional section contains groups of banked devices and cluster devices, which can be tested in parallel. BANKNAMEBANKCOMPONENT-NAME LIST; %VALUE Contains the value, tolerance, flagspecs and special operator messages. R1 = 1K, MSG=' '; %ADAPTOR Defines tester type(s) supported by each %ADAPTOR section: %ADAPTOR:2286TEMP; Multiple adaptor sections are permitted in each file. Maps the circuit connections to the test system nails. SyntaxTEST-NAIL(s) = CIRCUIT-NODE(s); ExampleF1 = U9_1;

6 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: Circuit Description Program Elements

7 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: ATG Monitor Page

8 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: File TypeExtension (Temp/Final) ASCII / Non-ASCII Compiled Circuit Description.WORN Circuit Desc. Error Listing.ERRA In-circuit Diagnostic Data File.IDX/IDDN 1&2 Circuit Desc.Extractor Report.ERPA Cross Reference Report.AXRA1A1 Automatic Test Options File.ATX/ATOA1A1 Analog Test Program.ATPA Analog ATG Results Report.RPTA1A1 Digital Test Program.DTPA Digital ATG Results Report.MSGA1A1 Merged Test Program (Source).TPX/TPGA1A1 Fixture Test Program.FTPA1A1 Connectivity Test Program.CTPA1A1 1 These files should be archived for Test Set Support. 2 These files are needed for the RTS (Run Time system).

9 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: Automatic Test Generator (ATG) Flow Automatic test generation (ATG) using the ATG monitor page is designed to allow specific (Y/N) control to each major ATG process. ATG is purposely divided into two steps. ATG STEP-1 processes the input (.CKT) file and necessary component library information into binary (.WOR) and (.IDX) files. An ASCII (.AXR) circuit cross reference report is also generated. By careful review of the (.AXR) file, you validate your CKTGEN data entry and make any necessary corrections before developing actual test programs in ATG STEP-2.

10 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax:

11 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: ATG STEP-2, via user selectable options, generates test programs in separate files including an analysis report for each test program. Each analysis report must be carefully scrutinized for warnings, errors, and post ATG summary information for every component. Note that it is optional to re-run ATG STEP-1 options during ATG STEP-2.

12 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: Nail Assignment Flow

13 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: Nail Assignment Monitor Page Default File Extensions Report Name ExtensionUsed … Nail Fixture Report.NFR 1 When wiring the fixture Nail Assignment Report.NAR 1 To keep a record of nail assignments Nail Data Base Report.NDB 1 As a database toward changing subsequent nail assignments Nail Assignment Listing.NLSTo evaluate the nail assignment process Nail Contact List.NCL 1 To verify the contacts in the fixture Nail Wire Length.NWL 1 As a reference when a short-wire fixture is built Wire Data Base File.WDB 1 By some fixture vendors in building short-wire fixtures

14 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: NAIL ASSIGNMENT Page

15 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: Nail Assignment Process

16 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: Translate Page

17 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: Default File Extensions Monitor ModeFile Type Extension (Temp/Final) ASCII / Non-ASCII TRAnslateTest Program Source.TPGA1A1 Object Code.OBCN 1 &2 Error Listing.LISA Symbol Table.SMTN1N1 1 These files should be archived for Test Set Support 2 This file is needed for the RTS (Run Time System).

18 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax: Translate and Debug Development Flow

19 No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel : Fax:


Download ppt "No.232, Yung- Chang Street, Ying-Ko, Taipei, Taiwan, R.O.C. Tel :886-2-2678-7966 Fax:886-2-2678-0160 程式发展流程 Tonyluo."

Similar presentations


Ads by Google