We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byAriana Lucas
Modified over 2 years ago
Advanced Technology Electronics Co. 1. Product Name : EMI Shielding Fabric 2. Structure of plating 3. Characteristics Nickel Copper Polyester, Woven fabric EMI Shielding Fabric Yarn Count Material REFERENCESTANDARDITEM Type Base Plating Polyester 100%, Woven fabric Copper + Nickel Ripstop 281T Thread(WarpXWeft) 50D X 75D Width(mm) Length(M/Roll) Plating grade Color Thickness(mm) Surface conductivity(/sq inch) 1,100 Gray More than ±10% One(1) connection EMQI-1027 ( ) Less than 0.08 EMQI-1026 ( 0.5Kgf ) KEC Method 88~102dB(40MHz~1GHz) Shielding effectiveness Lead(Pb) content Cadmium content Mercury(Hg) content Chromium (Cr 6+ ) content pass USEPA 3050B, ICP-AES (Less than 100ppm) EN 1122, ICP-AES (Less than 5ppm) USEPA 3052, ICP-AES (Less than 100ppm) USEPA 3060A (Less than 100ppm) PBB, PBDEs content pass Analyzed by GC/MS (Less than 100ppm) Density(WarpXWeft) 175 X 106 inch x inch 36F
Advanced Technology Electronics Co. 1. Product Name : Polyurethane Foam 2. Structure 3. Characteristics Polyurethane Foam Material Density(Kg/m ³ ) I.L.D,25% (Kg/314cm ² ) Tensile Strength (Kg/cm ² ) Elongation (%) Compression Set(70,22hr,50%) Ball Rebound (%) UL-94 Flammability 45±3 40 min 2.0 min 100 min Tear Strength (Kg/cm) 1.0 min 20 max 30 min pass JIS-K-6401 JIS-K-6301 JIS-K-6401 FMVSS# 302 Lead(Pb) content Cadmium content Mercury(Hg) content Chromium (Cr 6+ ) content pass USEPA 3050B, ICP-AES (Less than 100ppm) EN 1122, ICP-AES (Less than 5ppm) USEPA 3052, ICP-AES (Less than 100ppm) USEPA 3060A (Less than 100ppm) PBB, PBDEs content pass Analyzed by GC/MS (Less than 100ppm) Thermoplastic Polyurethane Polymer Color Black ITEM REFERENCE STANDARD
Advanced Technology Electronics Co. 1. Product Name : Conductive mesh with both side conductive adhesive (Mesh ) 2. Structure 3. Characteristics ( ) Conductive mesh Acrylic conductive adhesive Release liner Acrylic conductive adhesive Width(mm) Length(M/Roll) Adhesive Strength (180peel * gf/ 25mm) Thickness( ) 50 More than 3,600 More than 1,000 Less than *60% R.H. SUS 304Plate 30min, 300mm/min EMQI-1026 (0.5Kgf) 130 ±10 Max 1,000 PET film(25 ),40,500g Holding Strength (sec) Volume conductivity(/sq inch) Material REFERENCESTANDARDITEM Adhesive resin Composition Base Adhesive Polyester Woven fabric(Mesh), Copper and Nickel plated avg 100 One side conductive adhesive avg 30 The other side conductive adhesive avg 30 Acrylic ester polyol copolymer + Nickel powder Release Liner CP paper avg 70 Lead(Pb) content Cadmium content Mercury(Hg) content Chromium (Cr 6+ ) content pass PBB, PBDEs content Analyzed by GC/MS (Less than 100ppm) USEPA 3050B, ICP-AES (Less than 100ppm) EN 1122, ICP-AES (Less than 5ppm) USEPA 3052, ICP-AES (Less than 100ppm) USEPA 3060A (Less than 100ppm) EMI Shielding Adhesive
1 New build-up technique with copper bump AGP Process.
Web:www.hanmicable21.com Tel : (82) Fax : (82) , SONGJUNG-DONG, GANGSEO-GU, BUSAN, , KOREA.
Reproduction interdite © ALMA EUROPEAN CONSORTIUM Reproduction forbidden Design, Manufacture, Transport and Integration in Chile of ALMA Antennas Page.
ENERPIA heating film is the most advanced far-infrared planar heating element made of insulated and flame-retardant base film applied with carbon heating.
Drum cold rolled steel sheets ThicknessFlatness RollingDirectionCrosswise Total 4%max. 3mm Superior uniform hardness and tensile strength Excellent Paintability.
Introduction ; SK Group, SKC A powerful company that is creating a happy society with the backing of peoples trust 1.SK Group 2004 Total Sales : US$
Composite Materials Ahmed W. Moustafa Lecture (1).
UNIT -5 Rapid Tooling 1. RAPID TOOLING Rapid Tooling refers to mould cavities that are either directly or indirectly fabricated using Rapid Prototyping.
1 Preparation of Electrical Conductive ABS Composite for Bipolar Plates in PEM Fuel Cell Dr. Jatrawan Phumchusak And Miss. Somruthai Tunma.
Two protons, each of charge 1.6 x C are 2 x m apart. What is the change in potential energy if they are brought m closer together?
Radiographic Film & Intensifying Screens Bushong Ch 11 & 13.
Who Wants To Be A Millionaire? Fractions, Decimals and Percentages Edition.
ISE 316 Manufacturing Engineering I: Processes Polymer Processing.
Who Wants To Be A Millionaire? Fractions, Question 1.
DAEWOO ENERTEC, INC ENERPIA Heating Film Guideline of Installation #148-21, Nam-san 2 Dong Jung-Gu, Korea Office, Factory Tel: Fax:
Week 4 B Chapter 14 Radiographic Film Remnant Radiation: the x-rays that interact with the x-ray film. Few of the original x-rays actually make the image.
Btech corp Highly Conductive Z-axis Film Adhesives Longmont, CO Brentwood, TN.
RUSSELL FINEX MESH. Low Cost Mesh 75micron/250mesh Standard market grade 75micron/250mesh Varied apertures – poor product cut Damaged wire due to poor.
1 PERFORM WHEN THE HEATS ON NOMEX ® is a Registered Trademark of E.I. DuPont de Nemours & Co. Frequent Questions & Answers for DuPont TM ReliatraN ® Global.
Design of Corrugated Fiberboard Boxes -by tech team (JR Packages) Historical perspective Corrugated Board Corrugated Board Properties and Tests Properties.
Topview 5550 SMD LED IWS-505-UG-K3 IWS – 505-UG-K3Version of 1.0PAGE : # / 10 SPECIFICATION Suwon Company : , 802 Uman Industrial Comples,
1 1 = = = = = 6.
Terminals & Connectors Product specification VKR Plus - VKS Plus.
Microteja Plus ® A State of the Art Heat-Dissipating Coating.
High Value Metal Replacement in Automotive Powertrain Applications New Opportunities with Thermosets Under the Hood Jim Cederstrom Automotive Business.
SME Initiative Materials and Processes Division ESA/ESTEC/TOS-QM Sheet: 1 SME INITIATIVE COURSE MATERIALS SUMMARY PRESENTATION Dr. Ton de Rooij Head of.
1 Carbon Nanotube Antennas for Wireless Communications Jack Winters Jack Winters Communications, LLC NJ Coast.
1 Concrete Resin Bonded and Mechanical Anchors. 2 Purpose: Develop a design procedure for resin bonded and mechanical anchors to be used in the ODOT BDDM.
From… Maintenance Technical Advisory Guide (MTAG) Chapter 9 Microsurfacing.
© 2016 SlidePlayer.com Inc. All rights reserved.