How It Does It It accomplishes this task by locking itself inside the stripped receiver via the insertion of the Upper Guide Rod into the magazine retention hole located in the forward portion of the receiver, and by the capturing of the Lower Guide Rod by the re-installment of the forward trigger guard cross pin. Installation on a field stripped receiver literally takes seconds.
How It Does It (con’t) Once installed, the bolt is turned clockwise with a user-supplied wrench, driving the Pusher Bar forward and resulting in the effortless removal of the barrel out the front of the receiver. The AccuTec Barrel Pusher negates the need to place the receiver or barrel into a padded vice. Any mounted optics may be left in place. The Barrel Pusher replaces brute force with controlled mechanical leverage.
Physical Description Each 10/22® Barrel Pusher is machined to high tolerances using state of the art CNC equipment. The Pusher and Anchor bars are made from ¼” thick A-2 tool steel. Both Guide Rods are machined from 5/16” steel rod, then heat treated to a Rockwell (C) hardness of 50. The custom Pusher is constructed from 6/6 Nylon, which is extremely durable, yet won’t mar the barrel. A rust resistant Black Oxide coating is applied to all metal parts at no extra cost. Each Tool comes with a lifetime guarantee. The Tool’s physical size is roughly 2” tall, 4” long and it weighs 5 ½ ozs. Every AccuTec Tool is proudly made in the USA.
Summary The AccuTec 10/22® Barrel Pusher allows anyone to remove an existing barrel without the need for a bench- mounted vice and literally requires no effort. The Barrel Pusher will not harm, scratch or mar any portion of the barrel or receiver. Any mounted scopes/optics may remain in place. Works on any caliber 10/22® The perfect tool for the professional or amateur gunsmith. Each tool is individually inspected for quality control. Lifetime guarantee. Made in America.