Presentation is loading. Please wait.

Presentation is loading. Please wait.


Similar presentations

Presentation on theme: "LITHIUM BATTERY FIRE TESTS"— Presentation transcript:

Harry Webster FAA William J Hughes Technical Center

2 BACKGROUND Aircraft Cargo Fire
April 99 (LAX) Dropped pallet of batteries on ramp caught fire No external ignition source No current limitation on number of batteries shipped

Develop a test methodology to determine: Number of batteries or pounds of lithium that poses a threat to aircraft safety Effect of battery number on duration and intensity of fire Variation due to battery type Packaging effects (improved type if needed) Lithium interaction with Halon 1301

Measured Halon 1301 concentration Video port temperature measurement heat flux measurement various heat / fire sources

Fire Detection Halon % initial, 3% suppression Temperature/agent concentration instrumentation

6 PRELIMINARY TESTS Single battery tests by Dave Blake
Alcohol fire source flammable electrolyte venting High intensity lithium fire flare type and explosive combustion some visual indication of interaction between lithium fire and Halon

7 APPROACH Determine the maximum amount of lithium that can be safely controlled in a cargo compartment fire by the on board suppression system 5%/3% Halon 1301 increment battery number until no longer controllable

8 APPROACH (2) Investigate the effect of packaging(if needed)
Ignition sources / Fire intensity need for battery ignition Repeat series for distinct battery types Expand testing to include full scale tests (if needed)

9 PRODUCTS Data to support a rule making regarding air shipping of lithium batteries maximum number of batteries and/or pounds of lithium packaging requirements (if needed)

10 TEST SERIES 64 CUBIC FOOT TEST: Alcohol Fire Baseline tests:
20.6 square inch fire with 50 ml 1-Propanol 90.7 square inch fire with 220 ml 1-Propanol CR2 battery increment tests 1, 2, 4, 8, 16, 32, 64 and 128 batteries Packaging effects Cargo liner integrity tests

11 Preliminary Test Results
CR2 Battery Failure Mode: When exposed to an alcohol fire: Battery initially vents electrolyte gas, usually at the positive electrode. The electrolyte gas “torches” with a red flame and with some propulsive force. After the electrolyte burns off, the molten lithium then burns explosively, spraying white hot lithium through the vent hole. Unrestrained, the battery can bounce around the test fixture

12 CR2 Battery Tests Tests were run with 1, 2, 4, 8, 16, 32, 64, and 128 batteries The ignition of a single battery was sufficient to ignite the adjacent batteries The peak temperature generated by the battery fires did not go up significantly with the number of batteries. The duration of the peak temperature increased with the number of batteries

13 CR2 Battery Tests Peak temperatures ranged from 1100 to 1600 DegF
Packaging effects. 32, 64, and 128 batteries were placed in cardboard packaging similar to the shipping boxes Packaging delayed the ignition of the batteries by seconds

14 CR2 Battery Tests Packaging effects Cargo Liner Integrity Tests
The packaging kept the batteries together, heat from the fire fused them together. Once ignited, the fire propagated through all batteries. Cargo Liner Integrity Tests Three groups of four batteries were arranged so that the torching electrolyte and spraying molten lithium would directly impinge on liner.

15 CR2 Battery Tests Cargo Liner Integrity Tests Thin wall cargo liner
The battery fire ignited the resin The torching electrolyte penetrated the liner The molten lithium penetrated the liner Thick wall cargo liner The liner was able to contain the fire Face of liner charred, Fiberglas exposed, but not penetrated

16 Future Tests 64 Cubic Foot Box Tests: Full Scale Cargo Tests
Effect of Halon 1301 suppression Addition primary battery types Lithium Ion batteries Full Scale Cargo Tests Validate data from 64 FT3 tests

17 Halon Suppression Tests
Halon Concentration Tests The 64 cubic foot test facility was fitted with a Halon 1301 distribution system Facility fitted with a Halon concentration analyzer 1.23 lbs. of 1301 required to achieve 5% concentration Facility modified to achieve acceptable leakage rates

18 Halon 1301 / Lithium Battery Fire Test Conditions
Tests were conducted with 4,8,16 and 32 Sanyo CR2 batteries suspended over 90.7 square inch fire pan with 220 ml 1-Propanol Alcohol fire was ignited and allowed to burn until at least one battery ignited Halon 1301 was discharged at the point of battery ignition-extinguishing the alcohol fire.

19 Halon 1301 Suppression Results
Alcohol fire immediately extinguished Battery fires continued to propagate until all batteries were consumed Vented electrolyte fires were red in color Normally white molten lithium sparks appeared red in color Box temperature profiles lower due to extinguished alcohol fire.

20 Halon 1301 Suppression Conclusions
1301 has no effect on the intensity and propagation of the lithium battery fire The red color of the vented electrolyte flame indicates a chemical reaction with the 1301 The red color of the molten lithium sparks indicated a chemical reaction with the 1301 1301 has no suppression effect on the lithium battery fire

21 PL123 A Battery Tests Two brands of PL123 A batteries were tested
Duracell 1,4,8 and 16 batteries tested Halon suppression on second 16 battery test Panasonic 4,8,12 and 16 batteries tested

22 Pl 123 A Test Results Duracell Tests:
Batteries behaved very similar to CR2 type Initial electrolyte venting/flames followed by lithium sparks Halon suppression had no effect on battery fire propagation or intensity Larger battery size produced more intense fire than CR2

23 Pl 123 A Test Results Panasonic Tests
Batteries were much more explosive than the Duracell brand Most batteries vented in a controlled manner, but several blew the entire top off the battery Pressure pulse when this occurred was enough to blow the clamp off of the viewing door and deform the screen used to suspend the batteries over the alcohol fire

24 Screen Deformation due to Exploding PL123A

25 Lithium -Ion Battery Tests
Laptop Rechargeable Battery 14.4 Volt Compaq Presario Li-ion Two tests were conducted suspending the batteries over the 90.7 square inch fire pan with 220 ml 1-Propanol Fire load varied to obtain longer burn time: 125 ml alcohol: 3.5 minutes 250 ml alcohol: 6.5 minutes

26 Lithium Ion Battery Test Results
3.5 minute fire exposure Battery did not catch fire Plastic case deformed, melted, case became hard and brittle No self sustaining fire 6.5 minute fire exposure Similar results to 3.5 except: some small venting, with small sparks

27 Conclusions A relatively small fire source is sufficient start a lithium battery fire The ignition of a single battery produces enough heat to ignite adjacent batteries Halon 1301 is ineffective in suppressing a lithium battery fire Batteries of the same type but from different manufacturers exhibit varying flammability characteristics

28 Conclusions Halon 1301 chemically interacts with the burning lithium and electrolyte-with no effect on fire intensity Cargo liner is vulnerable to penetration by molten lithium Batteries fuse together when exposed to flame, promoting propagation between batteries

29 Future Tests Install pressure transducer to measure magnitude of pressure pulse Investigate other types/brands of lithium batteries Determine effectiveness of alternate suppression agents Full scale cargo compartment tests


Similar presentations

Ads by Google