Presentation is loading. Please wait.

Presentation is loading. Please wait.

SECME Requirements Building Bridges: SECME Requirements.

Similar presentations


Presentation on theme: "SECME Requirements Building Bridges: SECME Requirements."— Presentation transcript:

1 SECME Requirements Building Bridges: SECME Requirements

2 Building Bridges: Factors in Bridge Design - #1 What is the span of the bridge? Span means the length of the bridge from one side (bank) to the other – cm in length

3 Building Bridges: Factors in Bridge Design - #2 What are the requirements? A block 35 cm in length and 4 cm in height must be able to pass under it 36.0 cm – 35.0 cm = 1. 0 cm (length left) 5.08 cm – 4.0 cm = 1.08 cm (underneath bridge) NO room for a substructure (underneath roadway)

4 Building Bridges: Factors in Bridge Design - #3 What are the superstructure requirements? The superstructure (part above the roadway) – 10 cm – 20 cm in height _________ 10 cm – 20 cm

5 Building Bridges: Factors in Bridge Design - #4 What are the roadway requirements? Must have a level surface (horizontal), called a roadway, that a Matchbox car can roll across with a light push

6 Building Bridges: Factors in Bridge Design - #5 What are the roadway requirements? Roadway’s width must be 5-10 cm cm – 10 cm

7 Building Bridges: Factors in Bridge Design - #6 What are the weight requirements? Total weight of the superstructure shall not exceed grams (*Remember wood does absorb moisture)

8 Building Bridges: Factors in Bridge Design - #7 What are the requirements? Design must have an opening in the middle of the structure to allow for the test


Download ppt "SECME Requirements Building Bridges: SECME Requirements."

Similar presentations


Ads by Google