Presentation on theme: "PGS Introduction "Value Series" : Best VALUE gaming cases with the highest C/P Ratio (Cost to Performance ratio). "Professional Series – Red label" :"— Presentation transcript:
PGS Introduction "Value Series" : Best VALUE gaming cases with the highest C/P Ratio (Cost to Performance ratio). "Professional Series – Red label" : Super tower or Super mid-tower cases with elegant, clean line designs. "Aluminum – Silver label" : Unique “Full aluminum” cases targeting at power users, professionals and gamers. "Ultimate Gaming Series – Black label" : Ultimate gaming cases targeting at the extreme gamers. This Series offers gamers with most functions, expandability and Extreme cooling. "Compact – Blue Label" : Small form factor case series including cube cases, mini-ITX and Mini-Tower (Micro-ATX).
Design Concept Aerocool is proud to announce our first compact case (Model : Qs-200) under the PGS-Q series (Compact series – Blue Label). Qs-200 is one of the best “Mini-Tower” case in the market today if not the BEST Mini-tower case. This compact case is not only elegantly designed and solidly constructed; it also provides high versatility, expandability, transportability, protection and performance. The Qs-200 is designed with “User-Friendly” concept in mind and it also gives gamers high versatility and protection for their Hard Drives. Its “Screw-less” chassis, pre-installed cable management clips and removable HDD bracket made this chassis an easy install. The chassis can support 2 x 3 1/2” HDDs or 3 x 2 1/2” HDDs. These Hard Drives are also well protected from shock with the “anti-vibration” rubbers. The Qs-200 case also delivers optimal air flow and supports Longer High-End VGA cards up to 340mm. It is the only Mini-tower case in the market which can support 5 x 12cm fans (2 x12cm fans in front, 1 x 12cm fan in the rear and 2 x 12cm fan on the side panel). Its “Mesh” front panel also helps to maximize air-intake.
Gallery FrontBack Side Photos are for exterior reference only. Not all fans are inclusive. Please see specification page.
Features - High performance "Mini -Tower" for gamers and enthusiast - Solidly constructed chassis - 0.6mm SECC Japanese Steel - High-end Graphic card Support - Supports longer high-end VGA cards up to 340mm - High versatility - Supports 2 x 3 1/2" HDDs or 3 x 2 1/2" HDDs - HDD Protection - Includes anti-vibration rubber to protect your HDDs from shock. - Ease of Installation - The combination of Screw-less 5 1/4” bays, 3 1/2” bay and PCI Slot PLUS a Removable HDD plate make this chassis an easy install. - Easy Access front I/O ports - 3 x USBs, Audio/Mic and E-Sata ports - Smart Cable Management - “cable management clips” are pre-installed inside the chassis to minimize your cable mess and improve the system airflow - Dust Protection - Includes front "Dust Filter" to prevent dust entering your computer
Specifications Spec Cooling System Case Type Material Motherboards Chassis Dimensions Drive Bays Expansion Slots Max length space available for PCI slots I / O Ports Fan Rated voltage Starting voltage Power consumption Rated current Speed Air Flow (CFM) Air pressure Noise (dBA) Bearing :::::::::::::::: :::::::::::::::::::: Mini Tower SECC 0.6mm Mini - ITX / Micro ATX 367(H) x 185(W) x 395(D) 2 x 5.25" (External) / 1 x 3.5" (External) / 2x3.5” HDDs or 3x2.5” HDDs 4 Slots 340 mm 3 x USB2.0 / 1 x E-SATA / Mic & headphone (AC97 & HD audio) 120 x 120 x 25mm 12V ≤ 9V(Power ON/OFF) 2.64W 0.22A 1500 RPM +- 10% 58.35 CFM (Max) 2.1mm H2O 26.67 dB-A Sleeve 120 x 120 x 25mm 12V ≤ 9V(Power ON/OFF) 2.64W 0.22A 1500 RPM +- 10% 58.35 CFM (Max) 2.1mm H2O 26.67 dB-A Sleeve FrontRear
Air Flow Superb Airflow - install up to 5 x 12cm fans !!! 1. Front - 2 x 12cm fan (1 x 12cm Blue LED fan included) 2. Back - 1 x 12cm fan (1 x 12cm Blue LED fan included) 3. Side - 2 x 12cm fan (optional)
Inside-1 Sufficient depth for hi-end VGA cards up to 340mm Tool-Free for PCI slots Cable clips to reduce cable mess Can install up to 2x12cm fans Tool-free for 5.25” bays HDD installation option 3: 2.5” x 2 or 2.5” x 3 HDD installation option 2: 3.5” x 1 and 2.5” x 1 HDD installation option 1: 3.5” x 2 Removable HDD rack can be laid flat for ease of installation