1. Security Systems BU Communication SystemsDCN ST/SEU-CO 1 PC Controlled Cam. Control 09.12.2004 How to configure PC Controlled Camera Control

2. Security Systems BU Communication SystemsDCN ST/SEU-CO 2 PC Controlled Cam. Control 09.12.2004 This presentation is intended to guide the installer step by step through the camera control installation.

3. Security Systems BU Communication SystemsDCN ST/SEU-CO 3 PC Controlled Cam. Control 09.12.2004 PC controlled DCN system with Camera Control Direct Camera Control With Allegiant Video Switcher

4. Security Systems BU Communication SystemsDCN ST/SEU-CO 4 PC Controlled Cam. Control 09.12.2004 Direct Camera Control (PC Controlled) Requirements : One Dome Camera CCU with TCB4 One monitor DCN software V9.30 or higher!!! DCN Control PC = Temporary Installation PC Software LBB3588/00 V2.0 or higher!!!

5. Security Systems BU Communication SystemsDCN ST/SEU-CO 5 PC Controlled Cam. Control 09.12.2004 Step 1 Connect PC and Monitor to Dome Camera DCN Control PC with one Comport DCN Control PC with one Comport RS232 AutoDome Camera

6. Security Systems BU Communication SystemsDCN ST/SEU-CO 6 PC Controlled Cam. Control 09.12.2004 Step 2 Install virtual keyboard software LTC 5138/00 Virtual Keyboard Program Virtual Keyboard Program DCN Control PC with one Comport DCN Control PC with one Comport RS232 AutoDome Camera

7. Security Systems BU Communication SystemsDCN ST/SEU-CO 7 PC Controlled Cam. Control 09.12.2004 Step 3 Configure Virtual Keyboard

8. Security Systems BU Communication SystemsDCN ST/SEU-CO 8 PC Controlled Cam. Control 09.12.2004

9. Security Systems BU Communication SystemsDCN ST/SEU-CO 9 PC Controlled Cam. Control 09.12.2004 Make sure you choose the right camera!!

10. Security Systems BU Communication SystemsDCN ST/SEU-CO 10 PC Controlled Cam. Control 09.12.2004

11. Security Systems BU Communication SystemsDCN ST/SEU-CO 11 PC Controlled Cam. Control 09.12.2004

12. Security Systems BU Communication SystemsDCN ST/SEU-CO 12 PC Controlled Cam. Control 09.12.2004

13. Security Systems BU Communication SystemsDCN ST/SEU-CO 13 PC Controlled Cam. Control 09.12.2004 Step 4 Set Pre-Positions

14. Security Systems BU Communication SystemsDCN ST/SEU-CO 14 PC Controlled Cam. Control 09.12.2004

15. Security Systems BU Communication SystemsDCN ST/SEU-CO 15 PC Controlled Cam. Control 09.12.2004 Repeat Step 4 to set all Pre-Positions Set the highest Pre-Position as overview

16. Security Systems BU Communication SystemsDCN ST/SEU-CO 16 PC Controlled Cam. Control 09.12.2004 Step 5 Check the Pre-Positions

17. Security Systems BU Communication SystemsDCN ST/SEU-CO 17 PC Controlled Cam. Control 09.12.2004 If you were not successful setting up the pre-positions please don’t continue with the next steps. First make sure that the pre-positions are set.

18. Security Systems BU Communication SystemsDCN ST/SEU-CO 18 PC Controlled Cam. Control 09.12.2004 Step 6 Connect CCU to DCN Control PC and AutoDome AutoDome Camera Port 1 RS232 DCN Control PC DCN CCU Port 2

19. Security Systems BU Communication SystemsDCN ST/SEU-CO 19 PC Controlled Cam. Control 09.12.2004 Step 7 CCU protocol and Serial Port settings Make sure that the ports of the CCU are set correct. Port 1 Protocol = Full Baudrate = 115.2K Port 2 Protocol = Camera Control Baudrate = 9.6K Keep in mind !! LBB3500/15 & LBB3500/35 You have to change the baudrate of Port 2 to 9.6K !!

20. Security Systems BU Communication SystemsDCN ST/SEU-CO 20 PC Controlled Cam. Control 09.12.2004 Step 8 Start Camera Control Software LBB3588

21. Security Systems BU Communication SystemsDCN ST/SEU-CO 21 PC Controlled Cam. Control 09.12.2004 An installation file must be open before camera installation is possible. Keep in mind !!

22. Security Systems BU Communication SystemsDCN ST/SEU-CO 22 PC Controlled Cam. Control 09.12.2004 Step 9 Combine seat numbers with camera pre positions

23. Security Systems BU Communication SystemsDCN ST/SEU-CO 23 PC Controlled Cam. Control 09.12.2004 Make sure you choose the right camera!! Camera nr = Camera Address Keep in mind !!

24. Security Systems BU Communication SystemsDCN ST/SEU-CO 24 PC Controlled Cam. Control 09.12.2004

25. Security Systems BU Communication SystemsDCN ST/SEU-CO 25 PC Controlled Cam. Control 09.12.2004 5

26. Security Systems BU Communication SystemsDCN ST/SEU-CO 26 PC Controlled Cam. Control 09.12.2004 ©Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties.

27. Security Systems BU Communication SystemsDCN ST/SEU-CO 27 PC Controlled Cam. Control 09.12.2004 With use of Allegiant Video Switcher (PC Controlled DCN) Requirements : Allegiant switcher Video Switcher keyboard Fixed and/or AutoDome cameras Monitor(s) DCN software V8.00 or higher DCN Control PC with two Comports Software LBB3588 V1.0 or higher

28. Security Systems BU Communication SystemsDCN ST/SEU-CO 28 PC Controlled Cam. Control 09.12.2004 If you have DCN software V9.30 or higher then you need LBB3562 V2.0 or higher Otherwise it will not work. Keep in mind

29. Security Systems BU Communication SystemsDCN ST/SEU-CO 29 PC Controlled Cam. Control 09.12.2004 Step 1 Connect Camera(s),Monitor(s) and Keyboard to Video Switcher

30. Security Systems BU Communication SystemsDCN ST/SEU-CO 30 PC Controlled Cam. Control 09.12.2004 Step 2 Connect CCU to Allegiant Switcher and DCN Control PC Allegiant Switcher Port 1 RS232 DCN Control PC DCN CCU Port 2

31. Security Systems BU Communication SystemsDCN ST/SEU-CO 31 PC Controlled Cam. Control 09.12.2004 Step 3 CCU protocol and Serial Port settings Make sure that the following settings are chosen: LBB3500/15 & LBB3500/35 Port 1 Protocol = Full Baudrate = 115.2K Port 2 Protocol = Camera Control Baudrate = 19.2K Keep in mind !! These are the default settings for the LBB3500/15 &LBB3500/35

32. Security Systems BU Communication SystemsDCN ST/SEU-CO 32 PC Controlled Cam. Control 09.12.2004 Step 4 Start Camera Control Software LBB3588

33. Security Systems BU Communication SystemsDCN ST/SEU-CO 33 PC Controlled Cam. Control 09.12.2004 An installation file must be open before camera installation is possible. Keep in mind !!

34. Security Systems BU Communication SystemsDCN ST/SEU-CO 34 PC Controlled Cam. Control 09.12.2004 Step 5 Set Pre-Positions using the Video Switcher Keyboard

35. Security Systems BU Communication SystemsDCN ST/SEU-CO 35 PC Controlled Cam. Control 09.12.2004 Step 6 Combine seat numbers with camera pre positions

36. Security Systems BU Communication SystemsDCN ST/SEU-CO 36 PC Controlled Cam. Control 09.12.2004

37. Security Systems BU Communication SystemsDCN ST/SEU-CO 37 PC Controlled Cam. Control 09.12.2004 5

38. Security Systems BU Communication SystemsDCN ST/SEU-CO 38 PC Controlled Cam. Control 09.12.2004 How to configure PC Controlled Camera Control End of section  Robert Bosch GmbH All rights are reserved. Reproduction or passing on to third parties in whole or in parts is prohibited without the written consent of the copyright owner.