Presentation is loading. Please wait.

Presentation is loading. Please wait.

ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying.

Similar presentations


Presentation on theme: "ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying."— Presentation transcript:

1 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 1 Integrus Tech PT 03.Mar.06  Infra-Red Transmitters Infra-Red Transmitters  Infra-Red Radiators Infra-Red Radiators  Infra-Red Receivers Infra-Red Receivers  Charging Units Charging Units  6-Channel Interpreter’s desk 6-Channel Interpreter’s desk Product Technology I&O Manual

2 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 2 Integrus Tech PT 03.Mar.06 Infra-Red Transmitters front view 1.Mains on/off switch – A push button for switching ON/OFF the transmitter. 2.Mini digital IR-radiator - Two infra-red LED’s, transmitting the same signal as the digital radiator outputs. 3.Menu display – A 2x16 character LCD-display giving information about the transmitter status and it is used for the transmitter configuration. 4.Menu button – A turn-and-push button to operate the configuration software in combination with the display (3). 5.Monitoring headphone output – A 3.5 mm (0.14 in) jack socket to connect a headphone for monitoring purposes. Headphone output : 32 Ohm to 2 kOhm I&O Manual

3 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 3 Integrus Tech PT 03.Mar.06 Infra-Red Transmitter rack mounting  The transmitter is suitable for either table-top or 19-inch rack-mounted use.

4 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 4 Integrus Tech PT 03.Mar.06 Infra-Red Transmitter rear view connections 1.Interface module slot- An optional audio interface module can be mounted in the transmitter housing. 2.Emergency switch connector – A terminal block socket for a single, ‘normally open’ switch. When the switch is closed, the audio signal on the Aux-right input is distributed on all output channels, overriding all other audio inputs.

5 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 5 Integrus Tech PT 03.Mar.06 Infra-Red Transmitter rear view connections 3.Auxiliary audio inputs – Two female XLR connectors for extra audio inputs. They can be used to connect auxiliary symmetrical audio signals such as a music installation, the floor language or emergency messages. Symmetrical audio inputs : +6 to +18 dBV nominal 4.Audio signal inputs – 4, 8, 16 or 32 cinch plugs to connect external asymmetrical audio input signals. Asymmetrical audio inputs : -6 to +6 dBV nominal

6 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 6 Integrus Tech PT 03.Mar.06 Infra-Red Transmitter rear view connections 5.Earth connection point – Only used for factory testing purposes. 6.Radiator signal loop-through input – A HF BNC connector to loop- through the radiator output of another transmitter. HF input : nominal 1Vpp, minimum 10 mVpp, 75 Ohm 7.Radiator signal outputs – Six HF BNC connectors, used to connect the radiators. Up to 30 radiators can be loop-through connected to each output. HF output : 1 Vpp, 6 VDC, 75 Ohm

7 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 7 Integrus Tech PT 03.Mar.06 Infra-Red Transmitter rear view connections 8.Optical network connections – Two connections used to connect directly to the DCN Next Generation conference system with an optical network cable. 9.Mains input – Euro mains socket. The transmitter has automatic mains voltage selection. Mains voltage : 90 to 260 V, 50 to 60 Hz Power consumption : maximal 55 W (with 32 channels in use and the DCN Interface Module installed) Power consumption (standby) : 29 W

8 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 8 Integrus Tech PT 03.Mar.06 Infra-Red Transmitters Block diagram Note : Optical Input is not mixed with the Analog Inputs or the Interface card.

9 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 9 Integrus Tech PT 03.Mar.06 Infra-Red Transmitters Block diagram  Output section of the transmitter Carrier 1 Carrier 2 Carrier 3 Carrier 4 Carrier 5 Carrier 6 Carrier 7 Carrier 8  Output Drivers To Radiators Slave Input Control Carrier Summation

10 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 10 Integrus Tech PT 03.Mar.06 Infra-Red Radiator  Infrared Output : LBB4511/00 16W ~ LBB4512/00 32W  The infra-red radiator accepts up to 8 carrier signals (Max. 32 Channels)  Automatic mains power voltage selection V  Automatically switched on based on carrier signal detection.  The attenuation of the signal by the cable is equalised direct after the transmitter is switched on. The red LEDs at the front flash for a brief period of time to indicate that the initialisation is in progress.  Temperature protection mode (switching back to half output power) if the temperature of the IREDs becomes too high. I&O Manual

11 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 11 Integrus Tech PT 03.Mar.06 Infra-Red Radiator

12 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 12 Integrus Tech PT 03.Mar.06 Infra-Red Radiator Loop – Through inputs Do not terminate Loop-Through with Automatic cable termination. Loop-Through with Automatic cable termination. x10 x1 Delay compensation 10-position switches to compensate for differences in cable lengths to the radiators. Output power High Low full- and half-power operation mode Automatic mains power voltage selection V Automatic mains power voltage selection V

13 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 13 Integrus Tech PT 03.Mar.06 Low Power Wide Beam Radiator  Infra-red output of 3 W  Manual mains power voltage selection 115V or 230V  No automatic cable termination : the termination plug has to be connected to the last radiator in a trunk.  Automatically switched on based on carrier signal detection.

14 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 14 Integrus Tech PT 03.Mar.06 Low Power Wide Beam Radiator Limitations:  Not usable in combination with LBB4511/00 and LBB4512/00 radiators in one system (internal signal delays are different)  Not more than the first 4 carriers can be transmitted.  Not more than 100 m cable length from transmitter to last radiator.  Directly connection of the radiators to the transmitter with equal cable length  In loop-through connection, the total cable length from the first to the last radiator may not exceed 5 meters.  No communication of the radiator status to the transmitter.

15 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 15 Integrus Tech PT 03.Mar.06 Low Power Wide Beam Radiator (Rear View) 1.Male mains connector - for connecting the radiator to the mains supply. 2.HF BNC input and output connectors - for connecting the radiator to the transmitter or for loop through connection to other radiators. 3.Power reduction switch - reduces the output power of the radiator to 1.5 Wpp. 4.Radiator mounting bracket

16 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 16 Integrus Tech PT 03.Mar.06 Low Power Wide Beam Radiator (PCB) 5.Green LED - indicates that the radiator is switched on and is receiving carrier waves from the transmitter. 6.Red LED - indicates that the radiator output is 70% or less of the normal output level.

17 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 17 Integrus Tech PT 03.Mar.06 Low Power Wide Beam Radiator (PCB)  Default the Radiator is set for 230V. To set the radiator for 115V follow the next steps : Solder two small leads, one connecting X4 to X6 and one connecting X5 to X7. Remove the small SMD resistor R3. Replace fuse F1 (160 mA) with a fuse rated at 350 mA.

18 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 18 Integrus Tech PT 03.Mar.06 Infra-Red Receiver  Receivers are available for 4,8 or 32 channels.  They can operate with a rechargeable NiMH battery pack or with disposable batteries  Receivers have controls for: channel selection, volume adjustment and an on/off push button.  A 3.5 mm (0.14 inch) stereo jack output socket for mono or stereo headphones.  An LCD display shows the channel number and indicators for signal reception and low battery power.  Charging circuitry is included in the receiver.

19 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 19 Integrus Tech PT 03.Mar.06 Infra-Red Receiver 1.Headphone connector - A 3.5 mm stereo jack output socket, with integrated Stand- by/Off-switch. 2.LCD Display - A two digit display for showing the selected channel, the antenna symbol and the battery symbol. 3.Volume control – to adjust the volume in steps of 3dB. 4.Channel selector - to select an audio channel. 5.On/Off button - When a headphone is connected, the receiver switches to Stand-by. Pressing the On/Off button the receiver switched to On. To switch back to Stand-by, press and hold the button for approx. 2 seconds. When the headphone is removed, the receiver switches automatically to the Off-state I&O Manual

20 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 20 Integrus Tech PT 03.Mar.06 Infra-Red Receiver 6.Charging indicator LED - Used in combination with the charging equipment. See Charging procedure. 7.Battery pack connector - To connect the battery pack to the receiver. Charging is automatically disabled when this connector is not used. 8.Charging contacts - Used in combination with the charging equipment to recharge the battery pack (if used). 9.Battery pack or disposable batteries -Rechargeable NiMH battery pack (LBB4550/00) or two disposable AA- 24 size 1.5V batteries

21 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 21 Integrus Tech PT 03.Mar.06 LCD information during operating mode  Antenna symbol when the receiver picks up an infra red signal of adequate quality.  Channel number 0-31  A battery status information symbol is visible on the display when the batteries or the battery pack is almost empty. Operation time: up to 200 hours with disposable alkaline batteries (2 x AA) up to 75 hours with NiMH rechargeable battery pack (LBB4550/00) 31

22 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 22 Integrus Tech PT 03.Mar.06 LCD information in test mode  To be used during installation or a meeting.  Carrier detection symbol  Each receivers can be switched to Infra-Red coverage mode  Digits in display will mention the quality of reception for each carrier 00

23 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 23 Integrus Tech PT 03.Mar.06 New Technology  Digital Transmission protocol  Complies with the new IEC part 7, which is the new industry standard for digital infra-red transmission in the 2 to 6 MHz frequency band.  Error correction by means of a Reed Solomon coder ASIC

24 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 24 Integrus Tech PT 03.Mar.06 1.Mains input - Male Euro mains socket. The charging unit has automatic mains voltage selection V. 2.Mains on/off switch 3.Receiver positions - One charging unit can charge up to 56 receivers simultaneously. Charging Units I&O Manual

25 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 25 Integrus Tech PT 03.Mar.06 Charging procedure  When the receivers are placed in the charging compartments and the main power is switched on. The charging indicator LEDs on all receivers should illuminate. These LEDs indicate the charging status of each receiver  Notes: The charger always applies fast charge during the first 10 minutes after inserting a receiver. Inserting the receiver multiple times with a fully charged battery pack will damage the battery pack. Continuously charging the receiver will not damage the receiver or battery pack.

26 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 26 Integrus Tech PT 03.Mar.06 6 Channel Interpreter’s desk  The interpreter’s desk provides listening and speaking facilities for interpreters using the CCS 800, CCS 400 or non-Philips discussion systems.  Up to 12 desks can be connected to an Integrus transmitter using the Symmetrical Audio Input and Interpreters Module (LBB3422/20). It can distribute up to 6 outgoing languages. An ‘auto-floor’-feature is incorporated for relay interpretation.  The interpreter’s desk has an integral loudspeaker and is supplied with a microphone incorporating an illuminated status ring to warn everyone in the booth that the microphone is active.  Two outgoing channels are provided, A and B, switch able by means of a channel select key. I&O Instructions

27 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 27 Integrus Tech PT 03.Mar.06 6 Channel Interpreter’s desk I&O Instructions

28 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 28 Integrus Tech PT 03.Mar.06 6 Channel Interpreter’s desk 1.System connector – for connecting the next desk. 2.System cable – connecting to the Symmetrical Audio Input and Interpreters Module or the next desk. 3.Message connector - 6-pole female DIN connector for message function. (if required) 4.Headset switch - 2-position slide switch to select either the headset’s microphone or the built-in goose-neck microphone. 5.Headset connector - 5-pole female 180° DIN connector for connecting a headset. (in accordance with IEC ) 6.Headphone connector mm jack socket for connecting the headphone I&O Instructions

29 ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 29 Integrus Tech PT 03.Mar.06 End of section Integrus menu Product Technology


Download ppt "ST/SEU-CO | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying."

Similar presentations


Ads by Google