Presentation is loading. Please wait.

Presentation is loading. Please wait.

ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying.

Similar presentations


Presentation on theme: "ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying."— Presentation transcript:

1 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems DCN Next Gen 1 DCNNG VC IO 02.Mar.06 How to Configure Video Client  This presentation is intended to guide the installer step by step through the Video Client installation.

2 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 2 DCNNG VC IO 02.Mar.06 Installing and Operating VDClient  Installing the Video Client Application on the DCN Control PC Installing the Video Client Application on the DCN Control PC  Installing the Video Client Application on another PC. Installing the Video Client Application on another PC.

3 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 3 DCNNG VC IO 02.Mar.06 Installing VDClient on the DCN Control PC  Requirements: DCNNG software already installed on the PC LBB4184 (Video Display Software Module) ClientSetup.exe DCN Control PC LBB4184 ClientSetup.exe DCN Control PC LBB4184 ClientSetup.exe

4 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 4 DCNNG VC IO 02.Mar.06 Step 1Install LBB4184 LBB4184

5 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 5 DCNNG VC IO 02.Mar.06 Step 2Install the ClientSetup.exe

6 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 6 DCNNG VC IO 02.Mar.06 Step 3Start the DCNNG software  Choose the desired applications  Don’t forget to choose the Video Display Application!  Start the applications

7 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 7 DCNNG VC IO 02.Mar.06 Step 4Start VDClient  VDClient is located in the programs list in the Windows Start menu

8 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 8 DCNNG VC IO 02.Mar.06 Menu F12  When starting the application for the first time you will come automatically in the configuration window.  Choose Program runs on DCN Operator PC.  If needed adjust also other settings and click OK

9 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 9 DCNNG VC IO 02.Mar.06 End of Installing Video Display Software on a Server PC  End of this section.

10 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 10 DCNNG VC IO 02.Mar.06 Installing VDClient on another PC  Requirements : DCNNG software already installed on the DCN Control PC LBB4184 (Video Display Software Module) ServerSetup.exe ClientSetup.exe TCP/IP protocol must have been installed at both PC’s Both PC’s must be in the same workgroup DCN Control PC LBB4184 ServerSetup.exe DCN Control PC LBB4184 ServerSetup.exe VDClientPC ClientSetup.exe VDClientPC ClientSetup.exe TCP/IP

11 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 11 DCNNG VC IO 02.Mar.06 Step 1Set IP address of DCN Control PC

12 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 12 DCNNG VC IO 02.Mar.06 Step 1Set IP address of DCN Control PC  The IP addres of the DCN Control PC must be set to

13 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 13 DCNNG VC IO 02.Mar.06 Step 2Set Subnet mask of DCN Control Control PC  The Subnet mask of the DCN Control PC must be set to

14 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 14 DCNNG VC IO 02.Mar.06 Step 3Set IP address of the client PC

15 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 15 DCNNG VC IO 02.Mar.06 Step 3Set IP address of the client PC  The IP addres of the DCN Control PC must be set to

16 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 16 DCNNG VC IO 02.Mar.06 Step 4Set Subnet mask of the Client PC  The Subnet mask of the other PC must be set to

17 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 17 DCNNG VC IO 02.Mar.06 Technical Tips  If more client PC’s have to be installed the same steps have to made also for those PC’s.  Each client PC must have a unique IP address IP address x( x = decimal value)  All PC’s must have the same Subnet mask

18 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 18 DCNNG VC IO 02.Mar.06 Step 5Install LBB4184 LBB4184

19 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 19 DCNNG VC IO 02.Mar.06 Step 6Install ServerSetup.exe on the DCN Control PC

20 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 20 DCNNG VC IO 02.Mar.06 Step 7Install ClientSetup.exe on the client PC

21 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 21 DCNNG VC IO 02.Mar.06 Step 8Start the DCNNG software  Choose the desired applications  Don’t forget to choose the Video Display Application!  Start the applications

22 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 22 DCNNG VC IO 02.Mar.06 Step 9Start VDServer on the DCN Control PC  VDServer is located in the programs list in the Windows Start menu

23 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 23 DCNNG VC IO 02.Mar.06 Step 10Start VDClient on the Client PC  VDClient is located in the programs list in the Windows Start menu

24 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 24 DCNNG VC IO 02.Mar.06 Menu F12  When starting the application for the first time you will come automatically in the configuration window.  Choose Program runs on an external PC.  Fill in the Network name of the DCN PC  If needed adjust also other settings and click OK

25 ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 25 DCNNG VC IO 02.Mar.06 How to Configure Video Client End of section Main Menu


Download ppt "ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying."

Similar presentations


Ads by Google