Presentation is loading. Please wait.

Presentation is loading. Please wait.

Manual Handling An Introduction.

Similar presentations

Presentation on theme: "Manual Handling An Introduction."— Presentation transcript:

1 Manual Handling An Introduction

2 Manual Handling

3 Course Content Statistics Definition Anatomy & Injuries Mechanics Law
Risk Assessment Lifting Safely

4 Anyone Hurt?

5 Accident Statistics Largest cause of accidents at work
37% Manual Handling 19% Slips, Trips and Falls 12% Other Causes 20% Struck by an Object 7% Falling from Height 5% Machinery

6 Accident Statistics Interpreted another way - the overall figure of 37% means that: 86000 people are absent daily 26,500,000 working days are lost annually £1000,000,000 is lost in production, sickness benefit and medical costs In terms of suffering each injury results in an average of 20 days off work – some never fully recover. Four out of five people suffer with back related problems at some time – the risk is greater after the age of 30.

7 Definition of Manual Handling
The transporting or supporting of a load by hand or some other part of the body including the lifting, putting down, pushing, pulling, carrying, moving or intentionally dropping or throwing a load

8 Anatomy Spine Three main functions To protect the spinal cord
To allow movement. To support the upper body Complex System Spinal Cord Nerves Ligaments Muscles & Tendons

9 Anatomy Spine - Strong and Flexible Problems – contributory factors
Gentle ‘S’ bend Move or lift in wrong way balance can be disturbed Problems – contributory factors Poor physical condition Posture Lack of exercise Excess weight Illness

10 Vertebrae 33 bones – the top 24 are separated by discs
Spinal Cord Disc Vertebrae 33 bones – the top 24 are separated by discs Each vertebrae has 4 joints which enables movement Vertebrae are larger towards the bottom of the spine Vertebrae

11 Anatomy Discs Act as shock absorbers Firmly attached to vertebrae
Poor blood supply Annulus stretches and relaxes during movement. Nucleus Annulus

12 Anatomy Discs Repeated stresses can cause minute tears and bulging of the disk. Presses on adjacent nerves and ligaments – pins & needles, pain, numbness Commonly called a slipped disc

13 Muscles Muscles are bundles of fibre which enable movement
Messages from the brain cause them to contract and relax Connected by tendons and when muscles contract the bones are drawn closer together A damaged muscle is called a strain

14 Mechanics Balance point is through centre of body when standing
A load held in front disturbs the balance - tension is generated in the back muscles to compensate Forms a lever effect Average person holding a 10kg load at arms length generates a counterbalancing tension up to 10 times more – to avoid falling over High or repetitive levels of tension in the back can cause damage – called muscle strain

15 Mechanics Lever effect is reduced if load held closer to the body
Centre of Gravity Centre of Gravity Lever effect is reduced if load held closer to the body

16 Ligaments & Nerves Ligaments Nerves Strong fibrous tissue
Small degree of elasticity Stooped back posture can result in permanent elongation – weakness and pain Damaged if stretched too far and torn – called a sprain. Nerves Millions of fibres transmitting electrical impulses Vertebrae enclose and protect Nerves branch out from the spinal cord and pass between vertebrae Irritated nerves can be felt right along there length – called sciatica

17 Manual Handling Regulations 1992
Regulations provide a hierarchy of measures Employers must: Avoid manual handling where possible Assess any hazardous activities where manual handling can’t be avoided If the assessment indicates a significant risk of injury a more specific assessment must be made Reduce the risk of injury as far as is reasonably practicable

18 Manual Handling Regulations 1992
Employees have duties too: Follow the laid down systems of work Make proper use of equipment provided Co-operate in H&S matters Advise your manager if you are unwell Not putting other people at risk

19 Risk Assessment I Individual’s capabilities L Load E Environment
T Task I Individual’s capabilities L Load E Environment any other factors

20 The Task Holding loads away from body Strenuous pushing and pulling
Twisting Stooping Reaching upwards Large vertical movements Long travel distances Strenuous pushing and pulling Unpredictable movement of load Repetitive handling Insufficient rest or recovery time Workrate imposed by the process

21 Individual Capability
Physical condition Illness Pregnancy Requires unusual capabilities Call for special information or training

22 The Load Heavy Bulky or unwieldy Difficult to grasp
Unstable/unpredictable Harmful ie sharp/hot

23 The Working Environment
Constraints on posture eg lack of space Poor floors Variations in levels Hot/cold/rain/ice/humid conditions Strong air movement Poor lighting conditions

24 Other Factors and people!!
Is movement hindered by clothing or personal protective clothing and people!! High Stress Poor Diet Lack of exercise Rushing – pressure of work Showing off Short cuts

25 Risk Assessment Identify the elements of significant risk
Decide who might be harmed and how Evaluate risks/Control measures Record the findings of assessment Review/revise assessment T Task I Individual’s capabilities L Load E Environment

26 Video Manual Handling – The Facts

27 Lifting Safely Ultimate Objective To Relieve Fatigue & Strain
Use correct handling techniques Ensure good vision Change position regularly Avoid over reaching or stretching Adjust work surface heights Relax where possible Use mechanical aids

28 Kinetic Lifting Summarised by: Plan the Route Assess the load
Correct position of feet Straight back Correct grip Lift smoothly

29 Kinetic Lifting Plan the Route Where is the load going
Are there obstructions in the way Is there somewhere to set it down

30 Kinetic Lifting One Person Lift Determine the weight
Look for sharp edges See if weight is evenly distributed Keep heaviest side to body Decide how to hold the load If it is too heavy use a trolley or get assistance

31 Kinetic Lifting Correct Positioning of Feet Comfortably apart
One foot positioned in direction of movement Other foot where it can give maximum thrust to the body To maintain good balance feet should never be too close together on the ground

32 Kinetic Lifting Straight Back Lower the body by relaxing the knees
Keep your back straight (but not vertical) Keep load close to body Keep chin in and head back

33 Kinetic Lifting Lifting
If lifting from ground make maximum use of legs Keep back straight but inclined forward As lift proceeds and the legs are straightened the back returns to vertical position Positioning of feet and bending of knees are the key factors in maintaining a straight back

34 Kinetic Lifting Correct Grip
Take a firm grip by using the palms of the hands and roots of fingers Taking weight on finger tips will create pressure at the end of fingers and could strain muscles and tendons in the arms A full palm grip will reduce muscle stress to the arms and decrease the possibility of the load slipping

35 Kinetic Lifting Lifting Smoothly
Thrust from back foot and straightening of knees will move body forwards and upwards – briefly off balance Immediately countered by bringing the back foot forward as if walking Lift now completed - forward movement results in smooth transition from lifting to carrying

36 Kinetic Lifting Carrying the Load Setting the Load Down
Make sure you can see where you are going Avoid twisting the body – move your feet instead If you need to change your grip – set the load down – not whilst walking Setting the Load Down Use the correct stance for lifting and set the load down gently

37 Kinetic Lifting Two Person Lift Decide who will be caller
Assess the weight Correct positioning of feet Straight back Correct grip Lift together The caller co-ordinates the lift and ensures each lifter knows what to do and when

38 Kinetic Lifting - Summary
Plan the route, the lift and the set down point Position your feet - bent knees, straight back Firm grip, lift smoothly, Move the feet – do not twist body Keep the load close to the body Put down smoothly – then adjust for final position

39 Conclusion?

Download ppt "Manual Handling An Introduction."

Similar presentations

Ads by Google