Presentation on theme: "Report Code: GN-GS-296-001 Part number: 40087082 Part name: CAP, DIFF BEARING CAST Supplier Name: KEY 3 CASTING LLC Supplier Contact: Brent McCombs Brief."— Presentation transcript:
Report Code: GN-GS Part number: Part name: CAP, DIFF BEARING CAST Supplier Name: KEY 3 CASTING LLC Supplier Contact: Brent McCombs Brief Description: Mixed material & Porosity Quantity Checked: 832 Quantity N/C: 12 pieces Quantity Suspect: TBD Sorting Activities: Yes What (Defect): Mixed material & Porosity Who (Reported by): Victor Ramirez (Quality Auditor) Where (Geographically): Bearing Cap machining area Where (On the piece): whole piece When (Date/shift/hour): October 23 rd 2013 – 2 nd Shift – 5:00 hrs PR&R: Pending Clean Point: Pending Lab Report: N/A Lot or Julian date: See pictures Necessary Pictures: Yes Discrepancy: At the machining area was reported one bearing cap that did not fit in the machine´s fixture, the part was checked and it presents a different shape the part number for this mixed part is that is used in model Zeta 250 RDM that is not produced at GMC. Also another defective part was detected at the carrier machining line, the part presents a Huge Pore and it was visually detected by the operator before assembling it with the carrier. Action Taken: The parts were segregated and we started to inspect the existent material stock at GMCl.. T he supplier was notified about this issue and we are waiting for their clean point. Supplier Quality Problem Description Guanajuato Manufacturing Complex AAM Maquiladora de México Date: October 23 rd 2013 NOTE : THIS PROBLEM MUST BE DOCUMENTED AND TESTED THROUGH THE 7D’s and DD&W AS SUPPORT, EVEN IF APPLICABLE TO PRR.
Excess Material Good Part Mixed part not used at GMC Good Part