We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published bySierra Poole
Modified over 2 years ago
GCC StellarJet 250UV Demonstration Eric Huang March 14, 2006
Introduction Flow Outlook Hardware Controller RIP Printing Service Station Printing Area Work Station
Vacuuming Conveyer System
Extension Roller Table
Media Feed and Take-up Roller ** Work with X motor assembly for media movement
Media Bar (Front & Rear) Alignment Bar Foot Pedal (Front & Rear)
Rail System ** Work with Y motor assembly for print carriage movement
Print Carriage Print Head Module * CMYKLcLm: Xaar XJ500, 360dpi * W: Xaar XJ500, 180 dpi Sub Tank Head Board and Relay Board
Print Carriage Auto Media Calibration (AMC) –Work with Z motor
UV Lamp Box and Power Supply UV Lamp Controller (Power supply & counter )
+/- Pressure System vs. Ink Supply Positive Pressure Pump Negative Pressure Pump
Compressor Control media bar / alignment bar / service station cover and wiper / cap and cover / media roller / UV Lamp Shutter
Board Control I/O Board X/Y-axis card,120 DIO card & PCI card (on IPC) Carriage Board Print Engine Board Valve I/O Board
LCD Monitor (Firmware Controller)
RIP - ColorPRINT Server Pro (with ICC Profile)
Engineer Training XL1200 Safety System. Engineer Training XL1200 Safety System Confidential 2 Standard Requirements Both the machine and the Safety System.
January 2009 Experience the UVPEC Benefits. The Barak UVPEC Benefits Usability: Simple and efficient media handling and User Interface Versatility: High.
0,150,00 0,50 1,00 0,30 0,07 – 0,04– 0,35 – 0,00– 0,31 –– 0,27 0,21 l + l 12 7m l 1,2 m l 5,8 m 1 2 l + l 12 4,5m l 0,5 m l 4 m 1 2 Fuel Supply DieselGasoline.
Ricoh Academy Europe Griffin-C1 D117/D118 Aficio MP C305SP/305SPF Service master full training module 1 Created by: Group L&D Version:1.0.a Classification:
1200 South Dixie Hwy West * Pompano Bch, FL Phone: (954) * Toll Free: (800) * Fax: (954) GLAVAL TITAN II LF Low.
Utility Line Truck #23 Vehicle Inspection revised Rick Sandvig.
1 Pneumatic Valves Lesson 4. 2 Introduction Compressed air and gases must be controlled to be useful. One of the advantages of pneumatic systems is the.
Bobbin winder Spool pin Hole for extra spool pin Upper tension- control dial Thread guide Thread take-up lever Thread cutter Flat bed attachment with accessory.
1. Ricoh Academy Europe Athena-C3 & Apollon-C3 D111 / D142 / D143 / D144 Aficio MP C3002 / 3502/ 4502/ 5502 Service Master Update training module 2 Created.
UNCLASSIFIED SLIDE - AASF1-NY Standards - 27 Feb Introduction to UH-60 INTRODUCTION to UH-60 CW5 Victor Figliuolo Ops-O / AASF1-NY SP / AASF1-NY.
ExoMars UV Laser diode thermal vacuum test Alex Rousseau.
Sustainability of Liquids with Inkjet Technology Daniel J. Fry February 25, 2008.
Parts of a Steam Engine. Tender Container holding water for the boiler and coal for the fire box.
The Dynapac Touch A new series of pneumatic tyred rollers: CP224, CP224W and CP274.
RISO Kagaku Corp Overseas Technical Department. Table of Contents Section: 1. Preparation of Service tools 2. Scan & Copy mode 3. Machine Transportation.
© Goodheart-Willcox Co., Inc. Permission granted to reproduce for educational use only Publisher The Goodheart-Willcox Co., Inc. Tinley Park, Illinois.
K15/21/25 Gasoline Engine Service Manual #
BeginningNext SlideBack End Program AVADAL 1 of 21 SK-1 Roller Apron Segment Overview.
TECHNOLOGICAL EQUIPMENT FOR RAIL WELDING PLANTS. Closed Joint Stock Company Pskovelectrosvar is a unique industrial enterprise manufacturing heavy electro-
1 Basis: HESHBON update: RR HESHBON HA-710 Wheel Alignment System Fahrwerksvermessungs-System Service Manual Service-Handbuch (Ver.1.0.
2010. EM EM Series Contents EM Family Modules BASE Head Module Feeding System Head Moving System Optical System Motion Control System Parts.
© 2001 Bunn-O-Matic Corporation. All rights reserved. Confidential material.
CR30-X Service Training. 2Created by Claus Steiner - 23 September 2006 Safety: Working with the Digitizer (1) Light injuries, damage Serious injuries,
PowerPoint ® Presentation Chapter 14 Analog Device Installation and PLC Programming Analog PLC, Input Device, and Output Device Circuit Wiring Programming.
MICRO-BIT TECHNOLOGY, INC. MP200 Presentation. Micro-Bit MP200 Presentation Overview l Operator Interface l Discrete I/Os l Analog I/Os l Motion controller.
A process in which one event follows another until a job is completed Event 1Event 2Event N For a process with N steps …….. Characteristics 1.) Discrete.
1 FUEL SUPPLY SYSTEM. 2 Purposes of Fuel Supply System Store sufficient amount of fuel for a reasonable cruising range for the vehicle. Filter the fuel.
Copyright © 2014 Delmar, Cengage Learning Coach Air Conditioning Instructor Name: (Your Name) 12 CHAPTER.
Introduction to HVAC Systems Presented by AirTight University.
1 AUTOMOTIVE BRAKING SYSTEMS AUTOMOTIVE BRAKING SYSTEMS.
© 2016 SlidePlayer.com Inc. All rights reserved.