2 Question: What do these motors have in common?
3 LC – Low Cost connector Option Answer: Competitors -Yaskawa, Danaher, Rockwell, and Panasonic Standard Molex (Tyco) connector option. Currently: In order to get a Parker motor with a Molex type connector: Submit a custom motor RFQ Takes time for quotation Takes time for design You must OK the design Place the order Receive the order = Wasting time! Until Now!!!
4 LC – Low Cost connector Option Announcing the LC – Low Cost connector option. Available on SM and BE motors. Releasing September 29, 2008
5 LC – Low Cost connector Option The LC option: Molex – Tyco connectors on end of 8” motor power and feedback leads. Standard available via Extranet Three different feedback options. Motor brake option still available. Mating cables available. CE approved
6 LC – Low Cost connector Option Motor Feedback Options with LC SM16XE, Q, R SM23XE, Q, R BE16X J, Q, R BE23XJ, Q, R BE341J, Q, R BE342J, Q, R All motors above can have standard or custom brakes installed with LC option. Not available with BE343 or BE344 motors Current draw too high for contacts.
7 LC – Low Cost connector Option BE part number nomenclature
8 LC – Low Cost connector Option SM part number nomenclature
10 LC – Low Cost connector Option When using LC with an Aries drive: (or any drive to have ideal noise isolation and immunity)… Must have 360 degree shielding P-clip is included with motor and feedback cables. P-clip is attached to motor mating cable and earth ground. Insulation already removed from cable exposing braided shielding. If a grounded surface is not readily available Motor has hole pre-drilled and tapped in housing for easy installation. This gives good noise immunity, not quite as good as the solid metal shell of a PS though!
11 LC – Low Cost connector Option Mating motor power cable – PL-1A3-xx Always will have brake connector on it Motor power, and brake connector. Even though motor may not have a brake One part number for brake / non-brake motors. Customer may cut off brake connector if not needed.
12 LC – Low Cost connector Option Tyco p/n’s If you wish to make your own mating cables: Motor connectors Mating connectors Motor connectors
13 LC – Low Cost connector Option Pricing Available on the extranet MPL will be updated with LC option E-configurator updated with LC option Priced between the “10” and FL option Remember…. Price of mating cables are less Customers can make their own cables. Readily available mating connectors.
14 LC – Low Cost connector Option The LC option gives you: Lower cost connector and cable option Great for “lab” applications Ability to build your own cable with readily available components More flexibility and options for your customer Standard options No more delays when ordering More standard options Sell more product! Not necessary to submit an RFQ for a custom
15 LC – Low Cost connector Option The LC option: Available to order September 29, 2008! Thank You!