Presentation is loading. Please wait.

Presentation is loading. Please wait.

AN INTRODUCTION TO THE 966A-DP DUAL DROP & INSERT OPTION FOR THE 966A-L3 TEST SET SLIDE 1 OF 22.

Similar presentations


Presentation on theme: "AN INTRODUCTION TO THE 966A-DP DUAL DROP & INSERT OPTION FOR THE 966A-L3 TEST SET SLIDE 1 OF 22."— Presentation transcript:

1 AN INTRODUCTION TO THE 966A-DP DUAL DROP & INSERT OPTION FOR THE 966A-L3 TEST SET SLIDE 1 OF 22

2 This presentation is designed to give you an overview of all the keys, buttons, displays and other gadgets on the front panel of the Digital Interface in your 966A-DP test set. Please refer to your USER’S MANUAL for more information about any of the functions discussed here. If you have any questions, please feel free to contact us at your convenience at don.brehm@itcmail.net, or 402-498-8400. TO REVIEW WHAT YOU’VE DONE, SELECT THE KEY YOU’D LIKE TO SEE AGAIN: MAIN SCREENMAIN MENUDisplay Function, Selection, TextTitle, Screen #, Side #Circuit Status Lines RSD232 & DDS PortsOPTION CONTROL (Key Pad)Jack Field DS1 RCV/XMT KeysBASE ACCESS KeyFUNCTION Keys HELP KeyNEXT KeyPREV Key HOME Key TO VIEW THIS PRESENTATION, USING PowerPoint, GO TO [View] AND SELECT [Slide Show]. USE YOUR COMPUTER [PAGE UP] OR [PAGE DOWN] KEYS, OR CLICK ANYWHERE ON THE SLIDE TO ADVANCE. THE [HOME] KEY WILL TAKE YOU TO THE FIRST SLIDE. THE [END] KEY WILL TAKE YOU TO THE LAST SLIDE. SLIDE 2 OF 22

3 966A-DP - DIGITAL INTERFACE UNIT This is the Digital Interface for the 966A-DP. The Dual Drop and Insert Interface for testing T Carrier is mounted in the lid of the 966A-L3. SLIDE 3 OF 22

4 966A-DP - DIGITAL INTERFACE UNIT SLIDE 4 OF 22 MAIN SCREEN This screen or your Corporate Logo will appear at Power-ON, after the test set has run it’s self diagnostics. Press any F key to go to the MAIN MENU.

5 MAIN MENU All tests start at the MAIN MENU. Press HELP here to view calibration dates, options installed, software version and the Serial Number for this test set. 966A-DP - DIGITAL INTERFACE UNIT SLIDE 5 OF 22

6 DIGITAL INTERFACE INTERFACE CONTROL BRDG TERM MON DS1 RCV2 DS1 RCV1 BASE ACCESS BRDG TERM MON 600 OPEN MENU CONTROL F4F5F6 F1F2F3 HELPNEXTPREVHOME OPTION CONTROL KP 12 ABC 3 DEF A STP 4 GHI 5 JKL 6 MNO B ST2P 7 PRS 8 TUV 9 WXY C ST3P 0 # ST D CANCELENTER DDS PORT RS-232C (DCE) DS1 SIDE 1 DS1 SIDE 2 R C V X M T AN INDEPENDENT TECHNOLOGIES COMPANY DISPLAY SCREEN Shows set up options and status, and results of tests. Move to the next slide for more information about this screen. 966A-DP - DIGITAL INTERFACE UNIT SLIDE 6 OF 22

7 FUNCTION KEYS These are Menu selection key indicators. When these keys are displayed with boxes around them they are functional, regardless of screen type (SET-UP, RESULT or CONFIGuration) and the displayed location of the keys, the operation is as defined in the HELP screen text. Selection text follows to the right of each key. When a selection is made with the function key, a box is drawn around the selection. BE9000-DP - DIGITAL INTERFACE UNIT DISPLAY SCREEN SLIDE 7 OF 22

8 TITLE The text that appears in the title location always refers to the Main Menu selection and if this is a SET-UP, RESULT, or CONFIGuration screen. SIDE NUMBER The SIDE NUMBER refers to DS1 RCV1 or DS1 RCV2. If SIDE ONE is showing, selections and test results are related to the DS1 RCV1 input. SCREEN NUMBER This number allows the user to track the selected screen’s position within the total number of SETUP or RESULT screens. SETUP screens always precede RESULT screens. Use the NEXT [NXT] and PREVious [PRV] keys to select the next or previous screen. BE9000-DP - DIGITAL INTERFACE UNIT DISPLAY SCREEN SLIDE8 OF 22

9 CIRCUIT STATUS LINE This line appears on all screens that relate to DS1 and DSØ testing. The line is divided with SIDE 1 information on the left and SIDE 2 information on the right. The information contained in the Status Line is a blend of MENU SELECTIONS, CIRCUIT ALARM CONDITIONS, CIRCUIT ERROR CONDITIONS and CURRENT CIRCUIT OPERATIONAL STATUS. SIDE 2 Information See next two slides. SIDE 1 Information See next two slides. BE9000-DP - DIGITAL INTERFACE UNIT DISPLAY SCREEN SLIDE 9 OF 22

10 LINE CODE Selectable - AUTO, AMI, B8ZS FRAME FORMAT Selectable - SF, ESF or AUTO BE9000-DP - DIGITAL INTERFACE UNIT DISPLAY SCREEN SLIDE 10 OF 22

11 CIRCUIT STATUS The letters FRM indicate that the circuit is framed and operational. All other indications such as LOS, AIS, RED, YEL are indications of a circuit that is not fully operational. ALARM & ERROR STATUS When any of these DS1 circuit alarms occur (LOS, AIS, LOF, RAI) a flashing A will appear. When any of these DS1 circuit errors occur (BPV, EXZ, FE, SLIP, B8ZS, CRC-6) a flashing E will appear. BE9000-DP - DIGITAL INTERFACE UNIT DISPLAY SCREEN SLIDE 11 OF 22

12 RS232C (DCE) This port is set up as a DCE Modem connector, which enables the Digital Option Package to connect directly to a DTE device such as a computer, printer or remote control terminal. DDS PORT This 9 PIN connector is used to connect various DDS test sets and other protocol analyzers. This is an input (TTL) and output port. SLIDE 12 OF 22 966A-DP - DIGITAL INTERFACE UNIT

13 OPTION CONTROL (KEY PAD) The 4 x 4 key pad is used to enter dial digits, select stored tests, select or cancel choices from a CONFIGuration screen, and other functions being developed. SLIDE 13 OF 22 966A-DP - DIGITAL INTERFACE UNIT

14 SLIDE 14 OF 22 966A-DP - DIGITAL INTERFACE UNIT

15 SLIDE 15 OF 22 966A-DP - DIGITAL INTERFACE UNIT

16 SLIDE 16 OF 22 966A-DP - DIGITAL INTERFACE UNIT

17 SLIDE 17 OF 22 966A-DP - DIGITAL INTERFACE UNIT

18 SLIDE 18 OF 22 966A-DP - DIGITAL INTERFACE UNIT

19 SLIDE 19 OF 22 966A-DP - DIGITAL INTERFACE UNIT

20 SLIDE 20 OF 22 966A-DP - DIGITAL INTERFACE UNIT

21 SLIDE 21 OF 22 966A-DP - DIGITAL INTERFACE UNIT

22 CONGRATULATIONS !!! You made it through this document. That’s a good thing!! Now refer to your manual to set up and run a test, or run the Self Test included in this CD. included in this CD. We appreciate you support and your business. If you have any questions please contact us at 402-498-8400 or email - don.brehm@itcmail.net. SLIDE 22 OF 22


Download ppt "AN INTRODUCTION TO THE 966A-DP DUAL DROP & INSERT OPTION FOR THE 966A-L3 TEST SET SLIDE 1 OF 22."

Similar presentations


Ads by Google