We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byLukas Bloise
Modified over 2 years ago
Designing the ship in a computer program AUTO CAD
from the timber I cut boards
Kuba draws the shapes of bords
I draw the ship shapes.
Ship is built with seven bords. It is a ruder`s bord.
Kuba cuts the sides.
I drill a hole in the board.
This is a ship`s side.
I grind a ship`s side.
Kuba holds various layers making the bords of the ship.
We glue the three bords.
Then we glue the others pieces of bords.
We fit pre-glued bords.
We glue all the bords.
Then we clench glued bords.
I grind the ship.
Ready ship Made by Mariusz Działo Jakub Smagacz
By: Kent Witana. I designed what it would look like I wrote down what I needed I went shopping for the things I needed(material, spray gun,spray paint,spray.
SCULPTURE: Art that is made to occupy space. It is 3D.
Stained Glass Windows From Tissue Paper.
© 2006 ITT Educational Services Inc. CD230 Architectural Design & Drafting: Unit 3 Slide 1 Unit 3 Doors and Windows in AAD.
Cutting Created by Inna Shapiro ©2008 Problem 1 The figure on the right is composed of three equal squares. Can you cut it into four equal parts?
HOW TO MAKE A ROCKET BY SAM CANNINGTON. THE FUSELAGE 1.Cut out a thin peace of cardboard.
A t m s r M A P f n C e
By: Lindsay Myers. Gather wood (cherry, walnut, maple) Plane wood (walnut – 1/8 in, all else – ¾ in) Joint one side of each board Cut boards to width.
A step by step guide to making professional looking rig bodies using the Rig Glue and Glue Tube system Christchurch Angling Centre
SolidWorks 3D Modeler for Altium Designer 6. Product Overview Installs into the Altium Designer application Communicates directly with SolidWorks Allows.
Exploring Matter Unit Review. What is Matter? Matter is anything that takes up space and has weight. Matter has three forms. Matter can be a solid, a.
How To Catch A Swarm Using Buckets. Take 2 plastic buckets and cut a large matching hole in the bottom of each. Using screen wire, preferably 1/8 hardware.
D.T. unit 5C: Moving Toys How to make a moving toy.
Terms & Definitions Drafting & Design Technology Unit 2.
How To Make a Tudor House This power point shows you how to make a Tudor House.
Woodwork Joints 2. Dowel Joint Dowel Jig Dowel joints have now replaced many traditional joints in factory made furniture where holes can be drilled accurately.
Face Jugs A Georgia Craft By Randy Farley. What is a face jug? A jug that has an Ugly face on it. The Ugly face has parts that have been exaggerated or.
Mt. St. Helen’s Question How will the topographic map of Mt. St. Helen’s change after the eruption? Hypothesis If a before and after topographic map of.
THE CLOSEST STAR TO THE EARTH THE SUN IS A STAR. THE SUN The Sun is a star. It is the star that is closest to the Earth.
7-5 The SSA Condition and HL Congruence. The abbreviations SsA and HL stand for two other combinations of measures of corresponding sides and angles in.
Graphing your ideas! Floor Plans. What is a floor plan? A floor plan is a drawing that shows a room as seen from above. Everything in a floor plan appears.
Lesson 10 Equation of a line y = m x + b. (-3,2) (4,-3) Graph point (-3,2) Graph point 4,-3) Draw line Draw vertical side of triangle Draw horizontal.
How To Make An Origami Frog By Max Walker. Origami (the art of folding paper) is an ancient Japanese tradition. You can make many things with origami,
Dragonflies and Butterflies. A Dragonflys Life An Adult Dragonfly: Has 2 sets of wings. Has a head, body, and long tail. Is made of organic shapes (made.
PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. -Offset: S CHAPTER 008-i.
EMS1EP Lecture 3 Intro to Soldering Dr. Robert Ross.
Autodesk Inventor: Part 3 Creating a Drawing Once a part has been finalized and fitted into the assembly, a Drawing needs to be made, so a diagram of the.
Threads and Fasteners Thread Symbols. Screw Thread Terms: External Thread: A thread on the outside of a member, as on a shaft. Internal Thread: A thread.
4-4 Equations as Relations Objectives 1. use an equation to determine the range for a given domain 2. graph the solution set for a given domain.
My ELC work food Units 1 Health & Safety in the Food Technology Room When making biscuits; By Bethany Coultas.
© 2016 SlidePlayer.com Inc. All rights reserved.