Presentation is loading. Please wait.

Presentation is loading. Please wait.

BACK POCKET ATTACHING FOR JEANS SUBMITED BY, AMBIKA.B PRAKRUTHI.N.

Similar presentations


Presentation on theme: "BACK POCKET ATTACHING FOR JEANS SUBMITED BY, AMBIKA.B PRAKRUTHI.N."— Presentation transcript:

1 BACK POCKET ATTACHING FOR JEANS SUBMITED BY, AMBIKA.B PRAKRUTHI.N

2 Basic level of technology 1.Overlock the top raw edge of the pocket 2.Check the pattern for the placement of the fold line at the top of the pocket. 3.Fold the top edge of the pocket down 2.5 cm with right sides together. 4.Sew down the folded section at each side along the seam allowance 5.Trim the threads and a little of the folded edge inside the seam allowance, just a little diagonal cut. 6.Turn the pocket over so that the right side is facing up. I've changed the top thread to a contrasting orange for top stitching. I lengthen the stitch slightly from 2.5 to 3 on my machine. Sew a line 2cm from the top Here's the pocket ready to sew on to the back of the jeans.

3

4 Intermediate level of technology 1.The patterns are computerized and the pocket panel is folded (hemmed). 2.The pocket is then stitched using SNLS machine.

5 Intermediate level of technology The pocket is automatically creased (folded) and it is stitching machine is fixed there itself finishes the back pocket to the jeans.

6 Cycle Time: 10.5 seconds Production Qty. per 8-Hour Cycle: 2,131 pockets Stitch Type:Lockstitch Stitch Length: Stitch Width:3.5 mm Vertical Hook:2.4 Materials:Heavy Sewing Area:250 x 250 Thread Trimmer:Standard Stacker:Standard Data Storage Method: 3.5 floppy disk (2HD/1.44MB) Max Sewing Speed: 4,250 rpm $59,000.00

7 Thank you


Download ppt "BACK POCKET ATTACHING FOR JEANS SUBMITED BY, AMBIKA.B PRAKRUTHI.N."

Similar presentations


Ads by Google