Presentation on theme: "Setup Guide Automated Redemption System. Welcome to the GROUPON family. The package you have received is the GROUPON Automated Redemption System. With."— Presentation transcript:
Setup Guide Automated Redemption System
Welcome to the GROUPON family. The package you have received is the GROUPON Automated Redemption System. With this system, you will be able to Electronically redeem GROUPONs right at the point of sale, Eliminate manual processes, Expedite payment for redeemed GROUPONS, and Streamline payments and GROUPON redemption in one easy step. GETTING STARTED: 1)Unpack contents 2)Connect Ethernet cable or Dial Cable 3)Connect Barcode Reader 4)Connect Power Automate GROUPON Redemption. Fast. Real-time.
Please take inventory of the package contents. You will need these for set up. Contents: GROUPON Device RJ45 Ethernet Cable RJ11 Dial Cable Barcode Reader and Stand Power Supply and Cord Setup Guide Unpack Contents 1
Connect Ethernet cable 2a If you are processing via the Internet: a)Remove cover from the bottom of device. b)Plug the RJ-45 connector on one end of the blue cable into the port labeled ETH on the bottom of the device. c)Plug the RJ-45 connector on the other end of the cable to an open LAN port on the router.
2 Connect Dial Cable 2b If you will be using dial access either for a primary method of communications or as a backup to the Ethernet connection, you can connect via a phone jack to the GROUPON device. a)Remove cover from the bottom of device. b)Plug the RJ-45 connector on one end of the phone line (gray) into the port labeled identified by the telco icon on the bottom of the device. c)Plug the other end of the phone line into the wall jack. And OR
Connect Barcode Reader 3 The barcode reader must be attached prior to powering up the GROUPON device. Insert the readers USB connector into the port identified by the USB icon:. Connect Power 4 Connect the power pin to the terminal and rotate counter-clockwise to lock in place. At this point you should have all necessary cables connected, so you can replace the cover. Now you can apply power to the system by plugging into a power strip. Surge protection is highly recommended. Example of all cables connected: Before twistAfter twist
If at any time in this process you encounter an issue, please call the set up hotline at Congratulations! You are now ready to process payments and GROUPON redemptions! 1 2 Replace cable cover 5