Presentation on theme: "YONGYI MOULD LIMITED 2010-09-30 Page1/9 kING Mould No: YY1045 Part name: P0054A2 Cavities :1X1 Material : POM Part weight: 241g Shrinkage:2.1% Part size."— Presentation transcript:
YONGYI MOULD LIMITED Page1/9 kING Mould No: YY1045 Part name: P0054A2 Cavities :1X1 Material : POM Part weight: 241g Shrinkage:2.1% Part size : 186X148X217
YONGYI MOULD LIMITED Page4/9 kING 8mm The tunnel gate is shown as the picture, please confirm.
YONGYI MOULD LIMITED Page5/9 kING Ejector block Ejector pin
YONGYI MOULD LIMITED Page6/9 kING Add 2degree draft angle Add 1degree draft angle The red surface add 1degree draft angle. The yellow surface add 0.5degree draft angle.
YONGYI MOULD LIMITED Page7/9 kING Before modificationAfter modification
YONGYI MOULD LIMITED Page8/9 kING Before modification After modification
YONGYI MOULD LIMITED Page9/9 kING Notice 1). We hope you send 2D drawing with tolerance, surface requirement to us, then we can control product quality better. 2). After all these questions are clear, we can begin to design and make mold, kindly please give us feedback as soon as possible.