Presentation on theme: "SCOTCHGARD VINYL FLOOR PROTECTOR. What is it? High performance floor finish that utilizes nano-sized, inorganic particles that upon curing, produce a."— Presentation transcript:
What is it? High performance floor finish that utilizes nano-sized, inorganic particles that upon curing, produce a floor finish that is up to 6 times more resistant to abrasion than traditional acrylic floor finishes –For use on for vinyl, vinyl composition, rubber, linoleum, and asphalt tiles floors. –Impressive stain, scuff, and scratch resistance –Reduced maintenance and labor costs Up to 55% savings vs traditional acrylic finishes –2 coat application with 3M Easy Shine Applicator System Floors can be operational again within 2 hours versus 4+ hours for other finishes –Uses Scotch-Brite Purple Diamond Floor Pad Plus to pop gloss back –15-30 minutes dry time per coat –Medium gloss / high durability Traditional acrylic floor finishes have high gloss but low durability –Does not need to be stripped or deep scrubbed
Leading Technologies – Vinyl Floors Conventional, Acrylic Floor Finishes – High Gloss/Easy to Repair –High maintenance requirements due to low durability –Tendency to become dull and soiled quickly –Frequent burnishing needed and scrub and recoats required to maintain appearance –Up to 4 hour downtime or more when complete strip out and refinish is required Scotchgard Vinyl Floor Protector –Only 2 coats needed to create a durable surface that is resistant to Scuffs Wear patterns Scratching Soiling Yellowing –Easy to maintain - neutral cleaner and automatic scrubber or microfiber flat mop –Burnish as desired Typically 1-2 times per month –Easy to repair- auto scrub with 3M Blue Cleaner Pad 5300 and 3M Neutral Cleaner and apply 1 coat –Doesnt require stripping! Can be stripped with traditional floor strippers if desired
How does it compare to other floor finishes? * Charts are for comparison purposes only
Initial Application 1.Strip all old finish or other coatings from floor using a 3M floor stripper and a 3M stripping pad. Rinse and allow floor to dry thoroughly. 2.Burnish the floor with Scotch-Brite Purple Diamond Floor Pad Plus (do not burnish floors that contain asbestos). 3.Dust the floor using the 3M Easy Trap Duster. 4.Apply a thin, uniform coat of Scotchgard Vinyl Floor Protector using the 3M Easy Shine Applicator System. Allow 15 to 30 minutes of drying time. 6.Burnish the floor with the Scotch-Brite Purple Diamond Floor Pad. 7.Dust the floor using the 3M Easy Trap Duster. 8.Apply a second thin, uniform coat of Scotchgard Vinyl Floor Protector using the 3M Easy Shine Applicator System. Allow 15 to 30 minutes of drying time. 9.Burnish the floor with the Scotch-Brite Purple Diamond Floor Pad. 10.Dust the floor using the 3M Easy Trap Duster.
Maintenance Dust mop, damp mop with microfiber flat mop or machine scrub as necessary. For optimum appearance, auto scrub with 3M Neutral Cleaner Concentrate (Twist n Fill Cleaning Chemical Management System product no. 3 ) and 3M Topline Autoscrubber Pad 5000. When appearance of floor begins to dull, burnish the floor using the Scotch-Brite Purple Diamond Floor Pad (typically 1-2 times per month). Recoat traffic areas or entire floor as necessary with Scotchgard Vinyl Floor Protector using the 3M Easy Shine Applicator System. Be sure floor is clean and free of marks before recoating (typically 1-2 times per year).
Frequently Asked Questions - FAQs What precautions do you need to take the first 24 hours after applying this product? –The first 24 hours is critical to avoid standing water. There are no restrictions from using an auto scrubber or microfiber flat mop, but standing water can cause a blotchy appearance. * If you anticipate standing water in places, it is recommended that you apply a 5% acetic acid solution, such as household vinegar, to the floor using the 3M Easy Shine Applicator System after you have applied the second coat and burnished. The acetic acid solution helps accelerate the curing cycle and helps make the floor resistant to damage caused by standing water and spills after the application. –Floor can be opened to traffic when dry to the touch (20-30 minutes after application) Are there certain cleaning chemicals that should not be used on this product? –Butyl (also known as 2-Butoxyethanol) or d-limonene containing products should not be used on this product. –Butyl is commonly found in Floor Strippers, Surface Emulsifier / Extenders, and Degreasers
Frequently Asked Questions - FAQs How do I remove the Scotchgard Vinyl Floor Protector from the floor? –If you would like to remove it completely and recoat with a traditional, acrylic floor finish, use a 3M floor stripper and a 3M stripping pad. Rinse with water and allow floor to dry thoroughly. You can also scrub the floor with the Scotch-Brite Surface Preparation Pad and recoat with a traditional, acrylic floor finish –If you would like to recoat the floor with Scotchgard Vinyl Floor Protector, you only need to clean it thoroughly with 3M Blue Cleaner Pad 5300 with water or neutral cleaner before recoating with Scotchgard Vinyl Floor Protector. If neutral cleaner is used, rinse the floor with water and allow floor to dry thoroughly. How often do I need to strip the Scotchgard Vinyl Floor Protector from the floor? –Once you begin using Scotchgard Vinyl Floor Protector on your floors, you should not have to strip it off. In most applications, you only need to thoroughly clean before reapplying a single coat, typically 1-2x per year.
Frequently Asked Questions - FAQs Is this product environmentally preferable? –This product system meets Executive Order 13423 definition of Environmentally preferable. –Helps reduce the need for finishes, strippers and crystallization products, and the labor intensive work associated with applying these chemical products According to the U.S. Office of the Federal Environmental Executive or OFEE, Environmentally Preferable Products are defined in Executive Order 13101, entitled Greening the Government through Waste Prevention, Recycling and Federal Acquisition, as products or services that have a lesser or reduced effect on human health and the environment when compared with competing products or services that serve the same purpose. This comparison may consider raw materials acquisition, production, manufacturing, packaging, distribution, reuse, operation, maintenance, or disposal of the product or service. In Jan 2007, E.O. 13101 was replaced with E.O. 13423 Strengthening Federal Environmental, Energy, and Transportation Management. To improve and expand on the basic principles of E.O. 13101, E.O. 13423 further sets goals in the areas of energy efficiency, and acquisition.
Your consent to our cookies if you continue to use this website.