Presentation is loading. Please wait.

Presentation is loading. Please wait.

18.4.2005 61508-työryhmä Automaatiojärjestelmien kelpoistaminen – ohjelmistot. ( Turvallisuuskriittisten ohjelmoitavien automaatiosovellusten kelpoistamisesta)

Similar presentations


Presentation on theme: "18.4.2005 61508-työryhmä Automaatiojärjestelmien kelpoistaminen – ohjelmistot. ( Turvallisuuskriittisten ohjelmoitavien automaatiosovellusten kelpoistamisesta)"— Presentation transcript:

1 18.4.2005 61508-työryhmä Automaatiojärjestelmien kelpoistaminen – ohjelmistot. ( Turvallisuuskriittisten ohjelmoitavien automaatiosovellusten kelpoistamisesta) Pentti Haapanen

2 18.4.2005 61508-työryhmä http://www.stuk.fi/julkaisut_maaraykset/fi_FI/tutkimusjulkaisut/ STUK-YTO-TR 202 Haapanen P, Helminen A, Pulkkinen U. Quantitative reliability assessment in the safety case of computer-based automation systems. STUK, Helsinki 2004. STUK-YTO-TR 198 Helminen A, Pulkkinen U. Reliability assessment using Bayesian network. Case study on quantative estimation of a software-based motor protection relay. STUK, Helsinki 2003. STUK-YTO-TR 171 Haapanen P, Korhonen J, Pulkkinen U. Licensing process for safety-critical software-based systems. STUK, Helsinki 2000. STUK-YTO-TR 119 Korhonen J, Pulkkinen U, Haapanen P. Statistical reliablity assessment of software-based systems. STUK, Helsinki 1997

3 18.4.2005 61508-työryhmä IEC TC 45 Nuclear Instrumentation SC 45A Instrumentation and control of nuclear facilities IEC 60880 (1986-09) Software for computers in the safety systems of nuclear power stations IEC 60880-2 (2000-12) Software for computers important to safety for nuclear power plants - Part 2: Software aspects of defence against common cause failures, use of software tools and of pre-developed software IEC 61513 (2001-03) Nuclear power plants - Instrumentation and control for systems important to safety - General requirements for systems IEC 60880 Ed. 2.0 (CDV, 2004-09) I&C systems important to safety - Software aspects for computer based systems performing category A functions IEC 61226 (2005-02) Nuclear power plants - Instrumentation and control systems important to safety - Classification of instrumentation and control functions

4 18.4.2005 61508-työryhmä Alustat/laitteet Kiinteästi ohjelmoidut Parametroitavat Konfiguroitavat Vapaasti ohjelmoitavat

5 18.4.2005 61508-työryhmä

6 18.4.2005 61508-työryhmä C5) Suppliers are quoting that their products conform to IEC 61508 for a specific safety integrity level. Does this mean that using these products is sufficient for me to comply with IEC 61508? No. A safety integrity level is not directly applicable to individual subsystems or components. It applies to a safety function carried out by the E/E/PE safety-related system. IEC 61508 covers all components of the E/E/PE safety-related system, including field equipment and specific project application logic. All these subsystems and components, when combined to implement the safety function (or functions), are required to meet the safety integrity level target of the relevant functions. Any design using supplied subsystems and components that are all quoted as suitable for the required safety integrity level target of the relevant functions will not necessarily comply with the requirements for that safety integrity level target. A simple example is when the subsystem or component is incorrectly installed. Important factors to be quoted by the supplier are the rate of unrevealed (i.e. not detected by the on-line diagnostic tests) dangerous failures and the diagnostic test interval (needed to ensure that a safe reaction to revealed dangerous failures can be achieved quickly enough). IEC 61508: Frequently Asked Questions http://www.iee.org/oncomms/pn/functionalsafety/61508faq_index.cfm

7 18.4.2005 61508-työryhmä

8 18.4.2005 61508-työryhmä

9 18.4.2005 61508-työryhmä

10 18.4.2005 61508-työryhmä

11 18.4.2005 61508-työryhmä

12 18.4.2005 61508-työryhmä

13 18.4.2005 61508-työryhmä

14 18.4.2005 61508-työryhmä

15 18.4.2005 61508-työryhmä

16 18.4.2005 61508-työryhmä

17 18.4.2005 61508-työryhmä

18 18.4.2005 61508-työryhmä

19 18.4.2005 61508-työryhmä Tilastollinen luotettavuustestaus

20 18.4.2005 61508-työryhmä

21 18.4.2005 61508-työryhmä


Download ppt "18.4.2005 61508-työryhmä Automaatiojärjestelmien kelpoistaminen – ohjelmistot. ( Turvallisuuskriittisten ohjelmoitavien automaatiosovellusten kelpoistamisesta)"

Similar presentations


Ads by Google