Presentation is loading. Please wait.

Presentation is loading. Please wait.

Tecom IP Receiver. Overview The Tecom IP Receiver is a server which provides a cost-effective and secure method to monitor Challenger panels over IP networks.

Similar presentations


Presentation on theme: "Tecom IP Receiver. Overview The Tecom IP Receiver is a server which provides a cost-effective and secure method to monitor Challenger panels over IP networks."— Presentation transcript:

1 Tecom IP Receiver

2 Overview The Tecom IP Receiver is a server which provides a cost-effective and secure method to monitor Challenger panels over IP networks. Advantages:  Remove phone line and call costs  Greater security with fully encrypted communication  Increased reliability and security with constantly polled connection. Your monitoring provider will know straight away if communications are lost  No waiting for modems to dial and connect

3 System Diagram Monitoring Provider Ethernet alarm monitoring path Remote Site X (up to 500) Challenger10 Data Centre IP Receiver Single, secure link to monitoring provider Remote Site 1 Challenger10 Customer Network

4 Features Panel functionality  Communicates to up to 500 panels  Supports connectivity to Challenger10 and Challenger V8 panels  AES128/256 bit encrypted communications (Challenger10 only)  Panel time synchronisation  Constantly polled connection to Challenger panels (with user-defined poll rate)

5 Features Simple to set up and support  Automatic enrolment of panels setup to point to receiver  Pre-loaded, Linux-based server to reduce installation time and complexity  Simple to install, Windows based client to configure and maintain multiple receivers  Inbuilt diagnostic features  Automated backup of receiver configuration and panel list

6 Features Flexible connectivity  Outputs standard Contact ID / Ademco 685 format to allow communication with most alarm monitoring software packages  Supports connection to the OnGuard access control package as an alarm receiver  Connect to alarm automation software via RS- 232 or Ethernet  Receiver failover/redundancy capability  Works simultaneously with Tecom management software (Titan, Security Commander, Forcefield)

7 Where to buy Direct Alarm Supplies (Australia) Hills Group (New Zealand) VARs (Value Added Resellers)


Download ppt "Tecom IP Receiver. Overview The Tecom IP Receiver is a server which provides a cost-effective and secure method to monitor Challenger panels over IP networks."

Similar presentations


Ads by Google