Presentation is loading. Please wait.

Presentation is loading. Please wait.

Technical Theater Terms, Movement, Safety, Practices.

Similar presentations


Presentation on theme: "Technical Theater Terms, Movement, Safety, Practices."— Presentation transcript:

1 Technical Theater Terms, Movement, Safety, Practices

2 PROSCENIUM - the arch that separates the stage from the auditorium

3 STAGE WINGS: the spaces on either side of the stage

4 STAGE DIRECTIONS:

5 CURTAINS: GRAND DRAPE:

6 TRAVELLER: In PAC - located Center Stage and Upstage

7 TEASER, TORMENTOR, LEG, BORDER

8 APRON: PAC apron is 10’ deep

9 Continental Seating:

10 American Seating:

11 CYCLORAMA - a drop (sky drop) that provides the illusion of open sky. Hung far upstage.

12 NOTICE: Cross-grain direction (perpendicular to joint) on keys and corners to improve strength. Same applies to straps on cornerbraces

13 For a 4’ x 12’ Flat: Rails = 4’ Stile = 12’ minus the width of the 2 rails 1/2) = 7”… SO… ?

14 For a 4’ x 12’ Flat: Rail = 4’ Stile = 12’ minus the width of the 2 rails 1/2) = 7”… SO… 11’ 5” NOTICE: keys, corners, and straps are INSET the width of the stock (3/4”) to allow butt-up NOTICE: the two cornerbraces are on the same side - never opposite sides

15 Cornerblocks and keystones are secured using an 11 nail/screw pattern for cornerblocks, and a seven to 10 nail/screw pattern depending on fastener and usage.

16 TOOL QUIZ: WHAT IS IT CALLED?

17 TOOL QUIZ: WHAT IS IT CALLED? TAPE RULE OR TAPE MEASURE

18 TOOL QUIZ: WHAT IS IT CALLED?

19 TOOL QUIZ: WHAT IS IT CALLED? PUTTY KNIFE

20 TOOL QUIZ: WHAT IS IT CALLED?

21 TOOL QUIZ: WHAT IS IT CALLED? BALL PEIN HAMMER (pound metal, cut gaskets and seal rivets)

22 TOOL QUIZ: WHAT IS IT CALLED?

23 TOOL QUIZ: WHAT IS IT CALLED? WOOD CHISEL

24 TOOL QUIZ: WHAT IS IT CALLED?

25 TOOL QUIZ: WHAT IS IT CALLED? CLAW HAMMER

26 TOOL QUIZ: WHAT IS IT CALLED?

27 TOOL QUIZ: WHAT IS IT CALLED? NAIL SET

28 TOOL QUIZ: WHAT IS IT CALLED?

29 TOOL QUIZ: WHAT IS IT CALLED? PRY BAR

30 TOOL QUIZ: WHAT IS IT CALLED?

31 TOOL QUIZ: WHAT IS IT CALLED? WRECKING BAR

32 TOOL QUIZ: WHAT IS IT CALLED?

33 TOOL QUIZ: WHAT IS IT CALLED? SPEED SQUARE OR QUICK SQUARE

34 TOOL QUIZ: WHAT IS IT CALLED?

35 TOOL QUIZ: WHAT IS IT CALLED? CARPENTERS SQUARE

36 TOOL QUIZ: WHAT IS IT CALLED?

37 TOOL QUIZ: WHAT IS IT CALLED? CHALKLINE

38 TOOL QUIZ: WHAT IS IT CALLED?

39 TOOL QUIZ: WHAT IS IT CALLED? I-BEAM LEVEL

40 TOOL QUIZ: WHAT IS IT CALLED?

41 TOOL QUIZ: WHAT IS IT CALLED? TORPEDO LEVEL

42 TOOL QUIZ: WHAT IS IT CALLED?

43 TOOL QUIZ: WHAT IS IT CALLED? SPRING CLAMP

44 TOOL QUIZ: WHAT IS IT CALLED?

45 TOOL QUIZ: WHAT IS IT CALLED? BAR CLAMP

46 TOOL QUIZ: WHAT IS IT CALLED?

47 TOOL QUIZ: WHAT IS IT CALLED? C- CLAMP

48 TOOL QUIZ: WHAT IS IT CALLED?

49 TOOL QUIZ: WHAT IS IT CALLED? ADJUSTABLE WRENCH OR CRESCENT WRENCH

50 TOOL QUIZ: WHAT IS IT CALLED?

51 TOOL QUIZ: WHAT IS IT CALLED? GROOVE JOINT PLIERS OR CHANNEL LOCKS

52 TOOL QUIZ: WHAT IS IT CALLED?

53 TOOL QUIZ: WHAT IS IT CALLED? NEEDLE NOSE PLIERS OR LONG NOSE PLIERS


Download ppt "Technical Theater Terms, Movement, Safety, Practices."

Similar presentations


Ads by Google