Presentation on theme: "WIT Computation of Primary Inadvertent Interchange (ATEC)"— Presentation transcript:
1WIT Computation of Primary Inadvertent Interchange (ATEC) Raymond R. Vojdani, P.E.
2WIT Computation of ATEC Background:WECC (PWG) & OATI Have Been Working On This Issue For About a YearThe Goal Has Been to Streamline and Standardize Computation of Primary Inadvertent Interchange (PII) Among All Balancing AuthoritiesThe Modification to WIT Has Been Completed for Selected Three BAs (to validate the calculations)WECC PWG Is Working With OATI to Re-compute Accumulated PII (on-peak & off-peak) for all BAs starting from July 2009***
3WIT Computation of ATEC Highlights of ComputationUsing Data in WIT (Schedules and Actuals), Uploaded Data from BAs (BA Bias, L max,) and some Constants (epsilon 10, and H ) and Data Provided by WECC Reliability Coordinator, Who is the WECC Time Monitor (Delta Time Error) WIT Computes PII As Specified in Regional Standard BAL-004-WECC-01
4WIT Computation of ATEC Computation CycleWIT Calculates PII 50 Minutes Past the hour using last hour Inadvertent Interchange and last hour Delta Time ErrorThe PII gets added to the Accumulated PII on-peak or Accumulated PII off-peak as appropriateUsing BA’s Bias and BA’s L 10 , WIT Computes a Recommended Payback ValueAny change to schedule, or tie data will trigger a re-computation of PII from that hour beyond (Also DTE and change by WECC Admin)
5WIT Computation of ATEC Data Provided by BAs:BiasBA’s with fixed Bias can use the API to enter their Bias ValuesBA’s with variable Bias can upload their hourly Bias value to WIT using EIDE protocolL maxThe value (upper & lower limit) which a BA can select for desired payback of Accumulated PII(bounded by BA’s L10 & 20% of BA’s Bias)
6WIT Computation of ATEC Constants Used In the Program:WECC Bias Value (provided by WECC Admin, currently 1999 MW/0.1Hz)Epsilon 10 (provided by NERC, currently 6.5 mHz)H (provided by PWG, currently 3)
7WIT Computation of ATEC Data Provided by WECC RCDelta Time Error (DTE)RC calculates DTE based on formula specified in the Regional standard and sends the value to WIT using EIDEIn addition, RC transmits calculated DTE value to all BAs in the WECC using ICCPBackup DTE values are provided by two other BAsBackup (1) is provided to assure communication security of DTE value, Backup (2) to verify calculation of DTE by RC
8WIT Computation of ATEC What Data Will Be Available to BAsPrimary InadvertentAccumulated Primary Inadvertent On-PeakAccumulated Primary Inadvertent Off-PeakRecommended Payback ValueThose who have OATI’s Scheduling Software, the ATEC term can be added to their NSIThese Data Can Be Transferred to BAs Using EIDE Protocol
9WIT Computation of ATEC Demo of PII CalculationNext Step:PII Computation is being tested by 3 BAs (AVA, AZPS, and WACM)Once all calculations are verified, the computation will be applied for all BAs (Nov. 1, 2010 H.E.All BAs PII will be recomputed going back to July 1, 2009.PWG will communicate with all WECC BAs with its expectation for using WIT computation of PII.
20WIT Computation of ATEC Issue Reporting:BAs who are currently using OATI’s webtrans software for their back-end OASIS, they have access to OATI Problem Reporting.https://problem.reporting.oatiinc.comIssues regarding PII computation should be reported under WIT Project.BAs who are don’t have access to OATI’s Problem Reporting can call OATI’s helpdesk and report the problem ( )In addition, issues can be sent to Anitha Neve of WECC
21WIT Computation of ATEC That is it!!!Any Questions ?