Presentation is loading. Please wait.

Presentation is loading. Please wait.

Electronics-line.com. 2 Training Agenda Features Review Hardware Overview Peripherals System Installation System Programming Remote Programming Hands-on.

Similar presentations


Presentation on theme: "Electronics-line.com. 2 Training Agenda Features Review Hardware Overview Peripherals System Installation System Programming Remote Programming Hands-on."— Presentation transcript:

1 electronics-line.com

2 2 Training Agenda Features Review Hardware Overview Peripherals System Installation System Programming Remote Programming Hands-on

3 electronics-line.com 3 Features Review

4 electronics-line.com 4 Prime Product Review Quick & easy device registration, each with a 16-character unique descriptor  32 User codes  32 wireless and 1 hardwire zones  19 Keyfobs  4 Wireless keypads (1-way or 2-way)  3 wired keypads  1 Wireless siren (1-way or 2-way)  4 Repeaters  16 Smart keys  Arming Methods: Full, Part or Perimeter  Event Log: 256 event capacity

5 electronics-line.com 5 Keypads Basic Functions

6 electronics-line.com 6 Keypads Additional Functions

7 electronics-line.com 7 Wireless Devices Supervision Time Supervised wireless sensors send a supervision signal approximately one hour after their last transmission. If the system does not receive supervision signals from a specific transmitter, the transmitter is regarded as inactive. The amount of time after which a transmitter is considered inactive is called the Supervision Time. From the Programming menu, select Devices, Superv. Time, General [9,1,6,1]. Enter a supervision time between 04:00 and 23:59 hours.

8 electronics-line.com 8 PC Connect Electronics line ‘Pc Connect’ module Connects the “Infinite prime” panel to a Pc using the ‘com’ port on the PC, and USB connector on the “Infinite Prime” panel. Allows easy firmware updates and local programming.

9 electronics-line.com 9 Feature that calls the user’s telephone number when specific events occur and plays pre-recorded messages. Programming these accounts’ phone numbers is done in menu [9,5,1]. Tip: This requires enabling which is done in menu [9,4,13]. Additionally, in the event of an alarm, the user is able to establish a Two-Way Audio connection on receiving the vocal message in order to check the premises. Tip: This requires enabling which is also done in menu [9,5,1]. Home ID The Home ID is a short message that is played at the beginning of a vocal message call in order to identify the system to the user. To record the message access menu [9,5,19,2]. For example, “Adams House” shall be played before the event messages. To play the message access menu [9,5,19,1]. Message Center The infinite prime Message Center is designed to allow the user to record a short message that may be played back later by another user. Play, Record and Delete menus [7,02,1]-[7,02,3]. Vocal Message Account Vocal Message Options

10 electronics-line.com 10 Extra Features “No Arm” Indication The “No Arm” indication is a feature designed to inform the central station that the system has not been armed for a specified period of time. From the Programming menu, select System Options, No Arm Ind. [9,4,09]. Select 1 Week, 2 Weeks, 3 Weeks, 4 Weeks or Disabled. RF Jamming The system is able detect RF Jamming that is usually caused by an intruder attempting to compromise the security system. From the Programming menu, select System Options, Jamming Det. [9,4,10]. Select Enabled or Disabled. “No Motion” The No Motion feature is designed to monitor the activity of disabled or elderly people. If a sensor defined as “No Motion” has not detected within a pre-defined period of time, a No Motion event message is sent to the central station. From the Programming menu, select System Options, No Motion [9,4,11]. Select 6 Hours, 12 Hours, 24 Hours, 48 Hours, 72 Hours or Disabled.

11 electronics-line.com 11 User Utilities - Two-Way Audio & Telecontrol Incoming Calls ˗Users may use this feature as a convenient way for contacting their family, operating their system or to check their home when they are away. Tip: For this feature to function, the Telecontrol User Code (#29) must be programmed. ˗Monitoring service can contact the user in the event of an emergency or use this feature for listen-in alarm verification. Tip: For this feature to function, the Central Station TWA User Code (#30) must be programmed. ˗For any of the incoming Telecontrol features to function, Telecontrol must be enabled in the Communication menu [ 9,5,4,10 ]. Outgoing Calls ˗The Service Call feature enables the user to establish a two-way audio connection with the central station operator. Tip: To program Service Call Phone Number access menu [9,5,3,1]. ˗In the event of Burglary, Fire and Medical alarms, the control panel is able to report the events and then stay on the line after ACK 2 is received. Tip: Two-Way Audio must be enabled for the specific account [9,5,1].

12 electronics-line.com 12  Remote Arming/Disarming.  Cancel Siren Activation.  Infinite Interphone. An additional external microphone/speaker unit could be connected to the panel, with up to 60m cable. User Utilities -Two-Way Audio & Telecontrol

13 electronics-line.com 13 Telecontrol Call Procedure Call the CP either using the double call method (PSTN) or directly (Cellular); when the control panel picks up, two DTMF tones are sounded. Enter the Telecontrol code (Code 29) on your telephone within 15 seconds. The following DTMF commands are available: Press “2” for Two-Way Audio. If the TWA mode is defined as “Simplex” the audio channel opens in Listen mode (microphone active/speaker mute). To switch to Speak mode, press “1” on your telephone. To switch back to Listen mode, press “0” on your telephone. Press “3” to fully arm the system. Press “6” to disarm the system. Press “9” to cancel the siren. Ten seconds before the timeout expires, two short DTMF tones are sounded. To extend the call, press “7” on your telephone. This command restarts the timeout. To disconnect before the end of the timeout, press “  ” then “#” on your telephone. Tip: The Central Station is not able to arm or disarm the panel using Telecontrol.

14 electronics-line.com 14 User Utilities- SMS Commands Remote Arming/Disarming via SMS Each SMS command contains the following elements: 1.SMS Command Descriptor (up to 43 characters of free text) 2.# (delimiter – separates the descriptor from the actual command) 3.User Code (4 digits) 4.Command (120=Disarm, 121=Full Arm, 122=Part Arm, 123=Perimeter Arm, 124=Full + Perimeter Arm, 125=Part + Perimeter Arm, 200 = Arm Status) The following example shows the format of an SMS command for arming the system. On receiving an Arm Status request message, the system returns a status message to the sender. Tip: The SMS Command feature must be enabled in order for it to function. Menu [9,5,4,13,4]. Tip: The SMS Confirm feature must be enabled in order for the CP to reply. Menu [9,5,4,13,5].

15 electronics-line.com 15 User Code Types Controlled/Non-controlled Codes When a controlled code used to Arm/Disarm the system the panel notifies the central station. The panel will send a message to the control station only if the code was used after an alarm occurrence. Limited Codes This feature enables the user to issue a code that is valid for 24hrs only. This code automatically expires 24hrs after it was issued. Duress Code Designed for situations when the user is being forced to operate the system. When the code is being used the panel sends a Duress event message to the central station.

16 electronics-line.com 16 System Initialization Options The Initialization function clears the entire system and resets factory defaults. Init All [9,7,1]. ˗For firmware versions that include multi-default and/or multi-language support, select the set of programming defaults and/or the required interface language that you want to load. Loading the system’s default program enables you to restore the factory-set programming defaults. Load Defaults [9,7,2]. Clear User Codes deletes all programmed user codes and restores the default Master and Installer codes. Clear Users [9,7,3]. The Clear Wireless Transmitters function enables you to delete all registered transmitters at once. Clear Wireless [9,7,4]. The Find Modules function runs a diagnostic test that identifies the modules and keypads that are connected to the system bus, enabling supervision for those modules. Find Modules [9,7,5].

17 electronics-line.com 17 Control home appliance over existing wiring through system panel, keyfob, wireless remote control/keypad, or via SMS command. Control Entrance Lights Control Electric Stove Control Garage Door Control Electric Heater Control – X10 Modules Home Automation

18 electronics-line.com 18 Home Automation X10 Control Modules

19 electronics-line.com 19 Home Automation SMS Commands Smart House control via SMS Each SMS command contains the following elements: ˗SMS Command Descriptor (up to 43 characters of free text) ˗# (delimiter – separates the descriptor from the actual command) ˗User Code (4 digits) ˗Command (0=Off, 1=On) ˗Device Number (HA Units: 01-16) The following example shows the format of an SMS command to switch on a water boiler controlled by HA unit 8. The following example shows the confirmation message the sender receives. Tip: The SMS Command feature must be enabled in order for it to function. Menu [9,5,4,13,4]. Tip: The SMS Confirm feature must be enabled in order for the CP to reply. Menu [9,5,4,13,5].

20 electronics-line.com 20 Home Automation The EL-2614 includes two buttons (B1 and B2) that you can program The default functions are as follows: B1: Part arming B2: Perimeter arming Select the HA unit you want the button to control (01-16) or enter 00 to program the button’s default function. Menu [912]. The EL-2640 is a Remote Control keypad. Apart from the Arming/Disarming function it can be used to turn HA units on and off. To do so press on/off button and HA number. HA Off HA On

21 electronics-line.com 21 Hardware Overview

22 electronics-line.com 22 Prime - Hardware Layout 1.Main Board 2.PSTN dialer module 3.Home Automation module 4.GSM module 5.Backup Battery Pack (7.2V,1.5/1.8/2.5/3.0AH) 6.USB type Connector

23 electronics-line.com 23 Prime Modules Main Module AC Supply and fuse HA Connectors DC Converter GSM Connector Tamper Switch Main CPU Transmitter Holes USB Connector PSTN Connector

24 electronics-line.com 24 Prime Modules GSM Module GSM Antenna SIM Card Flat cable to main board GSM Engine

25 electronics-line.com 25 Prime Modules PSTN Module Telephone and Line In connection Flat cable to main board

26 electronics-line.com 26 Prime Modules GSM Module Data Connector AC Input

27 electronics-line.com 27 The system supports up to three hardwire LCD keypads that may be installed up to 300m from the control panel. Installing Hardwire LCD Keypads LCD Contrast Potentiometer Flash Programming Connector Terminal Block Tamper Switch Set the keypad address as follows: Make certain the keypad’s tamper switch is open. On the keypad, press keys 1, 3 and 5 simultaneously. Use the arrow keys (  /  ) to select the keypad address. Press V. After installing hardwire keypads, perform the Find Modules function.

28 electronics-line.com 28 Peripherals Review

29 electronics-line.com 29 Intrusion Detection PIR technologies incorporating signal processing to provide the utmost in intrusion detection. EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb EL-2600/PI Wireless Motion Detector Microcontroller based signal processing, With optional pet immunity up to 25Kg PIR technologies incorporating signal processing to provide the utmost in intrusion detection. EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb PIR technologies incorporating signal processing to provide the utmost in intrusion detection. EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb PIR technologies incorporating signal processing to provide the utmost in intrusion detection. EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb EL-2600/PI Wireless Motion Detector Microcontroller based signal processing, With optional pet immunity up to 25Kg PIR technologies incorporating signal processing to provide the utmost in intrusion detection. EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb EL-2600/PI Wireless Motion Detector Microcontroller based signal processing, With optional pet immunity up to 25Kg PIR technologies incorporating signal processing to provide the utmost in intrusion detection. EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb EL-2600/PI Wireless Motion Detector Microcontroller based signal processing, With optional pet immunity up to 25Kg PIR technologies incorporating signal processing to provide the utmost in intrusion detection. EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb

30 electronics-line.com 30 EL2601/2602 EL-2601 Wireless Magnetic Switch EL-2602 Universal Transmitter Detects intruder entry from doors and windows EL-2652/IP Wireless External Pet Immune Detector External detector incorporating two PIRs for the utmost in false alarm protection. Also available in pet immunity version Intrusion Detection EL-2650XL Wireless Directional Curtain Detector Quad element directional solid curtain detector for perimeter protection. Narrow beam curtain allows free movement within protected premises.

31 electronics-line.com 31 Intrusion Detection and Event Notification EL-2635 Wireless Repeater Extends the range between the control panel and wireless detectors, eliminates problematic reception areas EL-2626 Wireless Siren Sounder and strobe available as fully wireless (EL- 2626WL) and AC powered (EL-2626AC) EL-2606 Glass break detector Acoustic glass break detector with superior detection performance

32 electronics-line.com 32 EL-2614 Wireless Multi-function Keyfob Keychain option controls system functions like full/part/perimeter arm, disarm, home automation and panic Keyfobs EL 2611 Wireless Panic Button Wireless Panic Button Water resistant, wireless panic button with Pendant/Keychain option, for 24/7monitoring EL-2640 Remote Control Enables arming and disarming of the system, panic signal activation and control of home automation devices EL-2614 Wireless Multi-function Keyfob Keychain option controls system functions like full/part/perimeter arm, disarm, home automation and panic EL 2611 Wireless Panic Button Wireless Panic Button Water resistant, wireless panic button with Pendant/Keychain option, for 24/7monitoring EL-2640 Remote Control Enables arming and disarming of the system, panic signal activation and control of home automation devices

33 electronics-line.com 33 EL-2620 Wireless Keypad Controls 16 home automation devices and enables one-touch full/part/ perimeter arm/disarm of system EL-2621 Two-way Wireless Keypad Indicates current system status, controls 16 home automation devices and enables one-touch full/part/perimeter arm/disarm of system EL-2622 Wireless Smart key Reader Easy to use smart key reader for arming and disarming the system Additional Keypads and Keyfobs

34 electronics-line.com 34 Wired Items Infinite Interphone External microphone/speaker unit for two way communication in case of emergency and alarm verification Wired Keypad – KPD/L Enables all system controlling and programming options. An ideal solution for installations where the control system is hidden from view

35 electronics-line.com 35 Environmental Safety EL-2661 Wireless Water Leak Detector Provides early warning of water leaks used in basement or near air conditioners and sinks EL-2603 Wireless Smoke Detector Photoelectric smoke detector, provides early warning of the presence of smoke EL-2603EN Wireless Smoke Detector Photoelectric smoke detector, provides early warning of the presence of smoke. EN-54-7 approved

36 electronics-line.com 36 EL-2662 Wireless Gas Detector Detects leaks of household heating or cooking gas- methane, propane and butane EL-2664 Wireless Gas CO Detector Detects and warns of carbon monoxide leaks Environmental Safety EL-2663 Wireless Low Temperature Detector Detects low temperature (5°C-41°F) to warn before winter freezes which may cause pipes to burst and other damage

37 electronics-line.com 37 System Installation

38 electronics-line.com 38 Installation Procedure  STEP 1: Opening the housing.  STEP 2: Temporarily powering up the system.  STEP 3: Registering the transmitters.  STEP 4: Testing the chosen mounting location.  STEP 5: Permanently installing the control panel and transmitters.  STEP 6: Installing hardwire LCD keypads

39 electronics-line.com 39 Installation Procedure – Step1 Step1: Opening the Housing 1.Remove the housing screw located at the bottom of the front cover. 2.Using a screwdriver carefully press the release tabs as shown in Figure 1 3.Lift the front cover away from the back of the housing.

40 electronics-line.com 40 Installation Procedure – Step2 Step2: Temporarily powering up the system 1.In order to register and test transmitters, it is necessary to temporarily power up the system before installing the control panel. At this stage, do not connect the backup battery. 2. Thread the power cable through the wiring hole on the back cover and connect the cable to the AC power input on the Main board. 3.Note: At this stage, ignore any trouble conditions that may appear on the LCD display (e.g. Low Battery). AC power inputWiring hole

41 electronics-line.com 41 Installation Procedure – Step3 Step3: Registering transmitters 1.Press + installer code 2.Enter menu Programming devices [9,1] 3.Select the type of device (Zones, Keypads etc…) 4.Select the device number (Zone1, Zone2 etc…) 5.Trigger two transmissions from the device 6.The message “Save?” indicates the two transmissions have been successfully received. 7. Press to valid or  to cancel the registration. 8.After validating the validation, the display switches automatically to parameter settings for the current device (Zone Type, Descriptor etc…) – See next slide. 9.Tip: To check if a device number has already been registered, repeat steps 1 to 4. If a device has been registered previously, the system skips the registration function and switches automatically to parameter settings for the current device (Zone Type, Descriptor etc…)

42 electronics-line.com 42 Installation Procedure – Step3 Step3: Registering transmitters – Setting the zone parameters 1.Press to enter the zone type setting and use the arrow keys ( ▲ / ▼ ) to select the zone type.Normal (PIR), 24Hr (PIR/magnetic), Entry/Exit (Entrance magnetic), Gas (Gas sensor), Follower (Entrance PIR), Flood (Flood sensor) Panic (Panic button), Environmental (Universal TX), Medical (medical button), No Motion (PIR), Fire (Smoke sensor), Not Used 2.Press to valid your choice, the display switches to Arm set setting. Set the arm set for this zone by pressing 1, 2 or 3. 1.Press to valid your choice, set the bell option for this zone 2.Press to valid your choice, set the chime option for this zone 3.Press to valid your choice, set the force arm option for this zone 4.Press to valid your choice, Press on  several times to return to the main menu 1-Full2-Part 3-Perimeter

43 electronics-line.com 43 Installation Procedure – Step4 Step4: Testing the chosen mounting location 1.Press + installer code 2.Enter menu TX TEST [7,07,2] 3.The system waits for transmissions. Activate the transmitter you wish to test; the transmitter’s signal strength is displayed and one to four tones are sounded accordingly. 4.If the signal strength is inferior to 6, move the transmitter to a better location as suggested below or use the EL-2635 repeater ZONE#1 S=9 OK ? ? Reduce the number of obstacle Consider the obstacle thickness Consider path angles Consider the wall material Metal

44 electronics-line.com 44 Installation Procedure – Step5 Step5: Installing the Control System and Transmitters 1.Disconnect AC power 2.Open the housing 3.Remove the backup battery pack 4.Install wall anchors in the appropriate positions. 5.Thread any required cables through the wiring hole on the back cover and make any necessary wiring connections: AC Power, Telephone, Wired keypad. 6.Apply AC power 7.Connect the battery pack 8.Tip: To check if a device number has already been registered, repeat steps 1 to 4. If a device has been registered previously, the system skips the registration function and switches automatically to parameter settings for the current device (Zone Type, Descriptor etc…)

45 electronics-line.com 45 Installation Procedure – Step6 The system supports up to three hardwire LCD keypads that may be installed up to 300m from the control panel. LCD Contrast Potentiometer Flash Programming Connector Terminal Block Tamper Switch Set the keypad address as follows: Make certain the keypad’s tamper switch is open. On the keypad, press keys 1, 3 and 5 simultaneously. Use the arrow keys (  /  ) to select the keypad address. Press. After installing hardwire keypads, perform the Find Modules function.

46 electronics-line.com 46 Installation Procedure – Step7 Step7: Basic programming  Set the communication parameters via menu ACCOUNTS [9,5,1]  Telephone number  Account number  Communication protocol (Contact ID, Twa Follow me)  Communication interface (GSM, PSTN)  Call attempts  Two way audio

47 electronics-line.com 47 Repeater – EL2635  Extends the range between control panel and wireless detectors.  Ideal for problematic reception areas like attics, basements and cellars.

48 electronics-line.com 48 Repeater – EL2635  Up to 4 repeaters for one CP.  32 Transmitters registered to each repeater.  Registration & tests performed using a programming keypad.

49 electronics-line.com 49 Repeater Installation  The repeater should be installed on the midway between the CP and the transmitter. Repeater CP

50 electronics-line.com 50 Repeater Installation Minimize the number of RF obstacles. The Repeater should be at least 1.50m above the floor and 1m below the ceiling. Apply all rules as for transmitters and receivers. 1.5m 1m

51 electronics-line.com 51 Repeater Installation Steps 1.Mount the control panel. 2.Register all the sensors to the CP. 3.Mount the sensors. 4.Identify the sensors having a low reception level. 5.Mount the repeater at halfway between the identified sensors and the control panel. 6.Register the repeater to the control panel. 7.Registering the identified sensors to the repeater.

52 electronics-line.com 52 Repeater Installation Two options for closing the top cover: 1. Install the antenna and then place to the top cover. 2. If you can’t install the antenna before closing the top cover follow these steps: a. Place the top cover (Do not tighten). b. Install the antenna. c. Tighten the cover using the screws.

53 electronics-line.com 53 Advances Tools for Simple Installation Installer built-in utilities List of all transmitters [7,07,1] Smart Walk Test [7,06] Transmitter Test [7,0,72] GSM Strength Meter [7,09] Wireless siren test [7,03] Internal siren test [7,04] Interface test [7,05] Real-time Transmitter list + status, signal strength meter Visual (on LCD screen) Audio (from speaker)

54 electronics-line.com 54 Remote Programming

55 electronics-line.com 55 Remote Programming On-site and remote configuration Fast Up/Downloading (30 Sec Max)

56 electronics-line.com 56 Remote Programmer Electronics Line 3000’s Remote Programmer (RP) software enables you to operate and program the system from a PC either on-site or from a remote location. You can connect to the panel from a PC using one of three methods: Direct Call: The RP calls the site, the system picks up and RP communication is established. Callback: The RP calls the site, the system picks up then hangs up. The system then calls the Callback telephone number to establish a connection. To program callback number access menu [9,5,2,1]. Serial Connection: The RP connects directly via serial port. The infinite Prime can employ either cellular or PSTN communication during remote programming. For PSTN communication, the RP uses a double call method so that the line can be shared with regular telephone handsets, an answering machine or fax. The GSM module has its own individual telephone number for data transfer and therefore, the double call method is not needed.

57 electronics-line.com 57 Remote Mastering Monitoring station Real-time status check, command and event Log Fast Up/Downloading (30 Sec Max)

58 electronics-line.com 58 Firmware Management

59 electronics-line.com 59 Firmware Management Product Overview Easy to use Electronics Line upgrading software. Compatible with Infinite Prime and Infinite Prime Hybrid Connections. Supports the upgrade of all additional modules (PSTN, GSM, HA and Voice Module) Windows based, user friendly application.

60 electronics-line.com 60 Firmware Management Procedure Enter Password (Default:12345)

61 electronics-line.com 61 Firmware Management Physical Connection ˗Connect Electronics Line’s ‘PC Connect Interface’ (ELPN ) as follows: ˗Connect USB A plug to the Prime’s USB connector. ˗Connect USB B to the ‘PC Connect Interface’. ˗Connect the 9-Pin female connector from the ‘PC Connect Interface’ to a COM port on the PC.

62 electronics-line.com 62 Firmware Management Port Definition ˗Define the computer’s COM port as follows: ˗From System menu, choose Set the COM Port. ˗Choose a serial (COM) port number from the list. ˗Choose the serial port speed – for the most reliable connection, Low Speed is recommended.

63 electronics-line.com 63 Firmware Management Firmware Choice If your panel requires a Default SRP file - select Load Defaults checkbox before updating the firmware. Click Load File; the Load dialog box opens. Select the DAT update file you want to use and click Open.

64 electronics-line.com 64 Firmware Management Control Panel Connection Click Connect; the Firmware Manager uploads the current and target firmware of all the control panel’s modules and displays them in the relevant columns. Once the current and target firmware has been uploaded, the Update Active Devices dialog box appears.

65 electronics-line.com 65 Firmware Management Firmware Update Click Update to start the firmware update; the progress of the update appears on the status bar located at the bottom of the window. Wait until "Done" appears on the status bar to indicate that the firmware has been updated successfully. Click Disconnect, connect the next panel you wish to update and repeat steps 3, 4 and 5.

66 electronics-line.com 66 Summery

67 electronics-line.com 67 Summery  Voice & SMS notification to user on burglary events.  User sends SMS to the CP in order to Arm / Disarm.  Telecontrol  Appliances activation through HA (SMS, keypad, keyfob, Remote control)  Appliances activation upon event, for example Door opening.  Service Call for TWA [9,5,3,1]  Message Center easy operation (^X REC / ^V PLAY).  Panic / Medical alarm automatically initiates TWA  Home ID [9519]  System trouble indications: AC loss, Line Monitor, Supervision Loss

68 electronics-line.com 68 Thank You Questions?


Download ppt "Electronics-line.com. 2 Training Agenda Features Review Hardware Overview Peripherals System Installation System Programming Remote Programming Hands-on."

Similar presentations


Ads by Google