Presentation on theme: "Part 9 Quality Assurance IAEA Training Material Radiation Protection in Nuclear Medicine."— Presentation transcript:
Part 9 Quality Assurance IAEA Training Material Radiation Protection in Nuclear Medicine
Nuclear Medicine Part 9. Quality Assurance2 OBJECTIVE To become familiar with the concepts of Quality Assurance in radiation protection in nuclear medicine and procedures for reviewing and assessing the overall effectiveness of radiation protection
Nuclear Medicine Part 9. Quality Assurance3 Content Content l General principles General principles General principles l Organization of QA Organization of QA Organization of QA l Administrative routines Administrative routines Administrative routines l Occupational and Medical exposure Occupational and Medical exposure Occupational and Medical exposure l Instrumentation Instrumentation l Education and training Education and training Education and training
Part 9. Quality Assurance IAEA Training Material on Radiation Protection in Nuclear Medicine Module 9.1. General principles
Nuclear Medicine Part 9. Quality Assurance Quality assurance programmes shall be established that provide, as appropriate: a) adequate assurance that the specified requirements relating to protection and safety are satisfied; and ` b) quality control mechanisms and procedures for reviewing and assessing the overall effectiveness of protection and safety. BSS
Nuclear Medicine Part 9. Quality Assurance6 Meaning for medical exposure that: II.22. Registrants and licensees shall establish a comprehensive quality assurance programme for medical exposures with the participation of appropriate qualified experts in the relevant fields, such as radiophysics or radiopharmacy, taking into account the principles established by the WHO and the PAHO.
Nuclear Medicine Part 9. Quality Assurance7 QA-PROGRAMME OBJECTIVES Improvement in the quality of the diagnostic information. * Use of minimum amount of radionuclide activity to ensure the production of the desired diagnostic information. * Effective use of available resources
Nuclear Medicine Part 9. Quality Assurance8 BSS II.23. Quality assurance programmes for medical exposures shall include: a) measurements of the physical parameters of the radiation generators, imaging devices and irradiation installations at the time of commissioning and periodically thereafter, b) verification of the appropriate physical and clinical factors used in patient diagnosis or treatment; c) written records of relevant procedures and results d) verification of the appropriate calibration and conditions of operation of dosimetry and monitoring equipment; and e) as far as possible, regular and independent quality audit review of the quality assurance programme for radiotherapy procedures.
Nuclear Medicine Part 9. Quality Assurance9 QUALITY ASSURANCE (definition) ”all those planned and systematic actions necessary to provide adequate confidence that a product or service will satisfy given requirements for quality” (ISO)
Nuclear Medicine Part 9. Quality Assurance10 QA and QC l Quality Assurance is the overall process which is supported by Quality Control activities l Quality Control describes the actual mechanisms and procedures by which one can assure quality
Nuclear Medicine Part 9. Quality Assurance11 QUALITY Quality of a practice is to fulfil the expectations and demands from: Patient Clinician Yourself
Nuclear Medicine Part 9. Quality Assurance12 QUALITY ASSURANCE Protection Safety OVERALL QUALITY Diagnostics Therapy
Nuclear Medicine Part 9. Quality Assurance13 QUALITY DEFINE OBJECTIVES How many times should the nurse be allowed to drop the child? What is an acceptable sens- itivity and specificity?
Nuclear Medicine Part 9. Quality Assurance14 NUCLEAR MEDICINE SERVICE Primary service Secondary service Nuclear medicine examination or treatment facilities patient care waiting time staff reporting competence experience optimisation radiopharmaceuticals methods examination technique instrumentation etc
Nuclear Medicine Part 9. Quality Assurance15 QUALITY ASSESSMENT Communication with the client (patient, clinician). Expectations Acceptable level Reality
Nuclear Medicine Part 9. Quality Assurance16 Clinical problem Radiopharmaceutical Instrumentation Diagnosis and therapy with unsealed sources NUCLEAR MEDICINE
Nuclear Medicine Part 9. Quality Assurance17 QUALITY ASSURANCE PROGRAMME A quality assurance programme in nuclear medicine should ideally include: Procedure (i.e patient history and signs, diagnostic question, appropriateness of investigation, contraindications) Planning of procedure (i.e reliable administrative procedures, patient information, patient preparation) Clinical procedure (i.e approved suppliers and materials, storage, preparation, clinical environment, patient handling and preparation, equipment performance, acquisition protocols, waste disposal) Training and experience of nuclear medicine specialists, physicists and technologists and others involved Data analysis (i.e processing protocol, equipment performance, data accuracy and integrity) Report (i.e. data, image review, results and further advice) General outcomes (i.e clinical outcome, radiation dose, patient satisfaction, referring physician satisfaction) Audit
Module 9.2. Organization Part 9. Quality Assurance IAEA Training Material on Radiation Protection in Nuclear Medicine
Nuclear Medicine Part 9. Quality Assurance19 International bodies Recommendations. Interlaboratory comparison programmes. Education and training. National organizations National guidelines, codes of practice etc. Interlaboratory comparison programmes. Education and training. Industry Assistance in acceptance tests. Documentation. Training. Maintenance. Professional associations Supporting QA-programmes Establishing working groups Education and training ORGANIZATIONS
Nuclear Medicine Part 9. Quality Assurance20 LOCAL ORGANIZATION Hospital manager (licensee) QA committee QA-group nuclear medicine (chief technician, physicist, physician, pharmacist)
Nuclear Medicine Part 9. Quality Assurance21 QA Committee Membership l l Must represent the many disciplines within the department l l Should be chaired by the Head of Department l l As a minimum must include a medical doctor, a physicist, a technologist and an engineer responsible for service and maintenance l l Must be appointed and supported by senior management l l Must have sufficient depth of experience to understand the implications of the process l l Must have the authority and access to the resources to instigate and carry out the QA process
Nuclear Medicine Part 9. Quality Assurance22 Quality Assurance Committee l l Should ‘represent’ the department l l Should be ‘visible’ AND accessible to staff l l Oversees the entire Quality Assurance program l l Writes policies to ensure the quality of patient care l l Assists staff in tailoring the program to meet the needs of the Department (using published reports as a guide) l l Monitor and audit the program to ensure that each component is being performed and documented
Module 9.3. Administrative routines Part 9. Quality Assurance IAEA Training Material on Radiation Protection in Nuclear Medicine
Nuclear Medicine Part 9. Quality Assurance24 ADMINISTRATIVE ROUTINES Request Patient id and care Patient id and care Computer evaluation Diagnostic report Diagnostic report Examination Method
Nuclear Medicine Part 9. Quality Assurance25 REQUEST It is the responsibility of the nuclear medicine specialist that the study requested by the referring physician is justified. Special attention must be paid to studies requested for children and pregnant women. Are there alternative methods e.g. ultrasound, MRI etc.? Communication, on a regular basis, between the referring clinician and the nuclear medicine specialist is very important.
Nuclear Medicine Part 9. Quality Assurance26 PATIENT Identification of the patient Information about the examination including premedications Waiting for the examination A fully informed and motivated patient is the basis for a successful examination as well as a staff well educated in care of the patient.
Nuclear Medicine Part 9. Quality Assurance27 YOUNG PATIENTS..should also be informed and motivated
Nuclear Medicine Part 9. Quality Assurance28 PATIENT MOVEMENT
Nuclear Medicine Part 9. Quality Assurance29 PATIENT MOVEMENT moving
Nuclear Medicine Part 9. Quality Assurance30 Policies and Procedures Manual l l Reviewed (typically) yearly l l This manual contains clear and concise statements of all the policies and procedures carried out in the department l l Updated as procedures change Policies and Procedures Manual
Nuclear Medicine Part 9. Quality Assurance31 Policies and Procedures Manual l l As a minimum, sections should exist for n n Administrative procedures n n Clinical procedures n n Radiation safety
Nuclear Medicine Part 9. Quality Assurance32 Policies and Procedures Manual l l It must be “signed off” by the Head of Department and appropriate section heads l l It is important that all staff have “ownership” to the manual - it should reflect the opinions of all and be agreed to by all l l A list of all copies of the Manual and their location must be kept to ensure that each copy is updated
Nuclear Medicine Part 9. Quality Assurance33 Methods should be in accordance with accepted practices Study name:Bone scan Preparation of patient:Empty bladder Radiopharmaceutical:Tc99m-MDP Route of administration:IV injection Activity:400 MBq Type of examination:Whole body scan Views:AP, PA Scanning speed:10 cm/minute Collimator:Scanning Window setting:140+/-20% keV Positioning of patient:Supine Presentation of result:Images in BW on film. Original and filtered. METHODS
Nuclear Medicine Part 9. Quality Assurance34 METHODS Static? Tomographic? Dynamic?
Nuclear Medicine Part 9. Quality Assurance35 METHODS Tl-201 Tc-99m 25 mSv 8 mSv
Nuclear Medicine Part 9. Quality Assurance36 Efficient use of computers can increase the sensitivity and specificity of an examination. software based on published and clinically tested methods well documented algorithms user manuals training software phantoms QUALITY ASSURANCE COMPUTER EVALUATION
Nuclear Medicine Part 9. Quality Assurance37 l Analysis of the programme code l Phantom studies l Simulated examinations l Reference data (normal material) l Clinical evaluation QC Application programmes
Nuclear Medicine Part 9. Quality Assurance38 Bone scan phantom
Nuclear Medicine Part 9. Quality Assurance39 Thyroid phantom
Nuclear Medicine Part 9. Quality Assurance40
Nuclear Medicine Part 9. Quality Assurance41 DIAGNOSTIC REPORT Patient identification Date and type of study Radiopharmaceutical and activity Study results - e.g. a graph or a series of images Objective description of findings Diagnostic conclusion and recommendations Avoid adjectives like ’possible’, ’probable’, ’likely’ etc. They can never be interpretated by the referring physician. The diagnostic conclusion should be more quantitative e.g. by using a probability statement.
Nuclear Medicine Part 9. Quality Assurance42 Patient follow-up. Correlation with other available surgical, pathological, clinical and anatomic information. False positives? False negatives? QUALITY ASSURANCE METHOD
Nuclear Medicine Part 9. Quality Assurance43 Society of Nuclear Medicine Procedure Guideline for General Imaging The final judge of any analytical method is a clinical audit: the correctness and impact of the decisions made with respect to any method and process.
Nuclear Medicine Part 9. Quality Assurance44 RECORDS Authorization certificate and documentation supporting the corresponding application, and also any correspondence between the licensee and Regulatory Authority; Name of the person authorized and responsible for the RPP; Individual doses (current and prior work history); Results of area surveys; Equipment and instrument QC tests and calibration; Inventory of unsealed and sealed sources; Incident and accident investigation reports; Audits and reviews of the radiation safety programme; Installation, maintenance and repair work; Facility modification;
Nuclear Medicine Part 9. Quality Assurance45 RECORDS (cont) Training provided (initial and continuing), including the following information: Name of the person(s) who delivered the instruction or training; Name of the person(s) who received the instruction or training; Date and duration of the instruction or training; List of the topics addressed; and Copy of the certificates of training. Evidence of health surveillance of workers; Waste disposal; Transportation: Package documentation; Package surveys; Transfer/receipt documents; and Details of shipments dispatched Patient records; and Patient discharge surveys for patients receiving radionuclide therapy.
Module 9.4. Occupational and medical exposure Part 9. Quality Assurance IAEA Training Material on Radiation Protection in Nuclear Medicine
Nuclear Medicine Part 9. Quality Assurance47 EXAMINATION Request Patient id and care Patient id and care Computer Evaluation Diagnostic report Diagnostic report Examination Method
Nuclear Medicine Part 9. Quality Assurance48 The patient shall always be confident that a nuclear medicine examination and therapy is performed correctly and with highest possible quality regarding both diagnostics/therapy and safety.
Nuclear Medicine Part 9. Quality Assurance49 Medical exposure l l Choice of examination l l Determination of technical parameters l l Optimization of administered activity l l Methods of reducing the absorbed dose l l Quality control of equipment and radiopharmaceutical l l Quality assurance of methods l l Safe routines to avoid misadministration
Nuclear Medicine Part 9. Quality Assurance50 Factors affecting medical and occupational exposure Receipt and storage Receipt and storage Preparation Contamination Radioactive waste Radioactive waste Detection (QC equipment) Detection (QC equipment) Administration
Nuclear Medicine Part 9. Quality Assurance51 QUALITY CONTROL RADIOPHARMACEUTICALS Radionuclide purity (other radionuclides?) Radiochemical purity (labelling efficiency) Chemical purity (toxic substances?) Sterility Absence of pyrogens Responsibility of the approved manufacturer and supplier
Nuclear Medicine Part 9. Quality Assurance52 Quality control of radiopharmaceuticals. Written and trained procedures in preparation and safe handling of radiopharmaceuticals Use of a unique code which guarantee the ability to trace the origin of all components in the preparation. Records of radionuclides, kits etc. Labeling of vials and syringes. Measurement of activity. QUALITY ASSURANCE RADIOPHARMACEUTICALS
Nuclear Medicine Part 9. Quality Assurance53 PREPARATION OF RADIOPHARMACEUTICALS Tc99m-MDP SC Use a transparent vial shield Put the kit in the shield Add Tc99m and finish the preparation Measure the activity Write the label and put it on the vial shield Check the kit and the label on the vial shield. Same radiopharma- ceutical?
Nuclear Medicine Part 9. Quality Assurance54 Tc99m-MDP 400 MBq SC Check kit and vial shield label Correct radiopharmaceutical? Draw the required volume Measure the activity Write the label and put it on the syringe shield DISPENSING RADIOPHARMACEUTICALS
Nuclear Medicine Part 9. Quality Assurance55 Patient name? Patient identification number? Pregnant? Breastfeeding? Check the request form Check the label of the syringe. Correct radiopharmaceutical for the required examination? Correct activity? Inject! INJECTING RADIOPHARMACEUTICALS
Nuclear Medicine Part 9. Quality Assurance56 The worker should always feel confident that he/she has the necessary training in order to perform his/her duty. The worker should feel that he/she gets the necessary support from the licensee in matters concerning working situation and safety.
Nuclear Medicine Part 9. Quality Assurance57 FACTORS AFFECTING QUALITY Design of facility Safe receipt and storage of unsealed sources Safe handling of unsealed sources Management of radioactive waste Safety equipment Personal monitoring Health surveillance Workplace monitoring Emergency procedures Local rules Training and experience of staff
Nuclear Medicine Part 9. Quality Assurance58 EDUCATION OF STAFF Correct use of equipment Close 15 cm Wrong setting of energy window
Module 9.5. Instrumentation Part 9. Quality Assurance IAEA Training Material on Radiation Protection in Nuclear Medicine
Nuclear Medicine Part 9. Quality Assurance60 How to get a new Gamma camera?
Nuclear Medicine Part 9. Quality Assurance61 PURCHASE GROUP Nuclear medicine specialist Nuclear medicine technologist Medical physicist Medical engineer Person from the hospital administration
Nuclear Medicine Part 9. Quality Assurance62 How to open the safe? Careful analysis of the need and state the reasons for the purchase of the gamma camera Establishment of a nuclear medicine service Increased volume of patients The technical performance is not good enough for new methods No spare parts available Unrepairable
Nuclear Medicine Part 9. Quality Assurance63 How many cameras? As an example, let us assume that in a certain region of a country having a stable population of there are plans to establish a nuclear medicine facility. The mean number of examinations in the country is 15 per 1000 population and year but the new department should be designed to fulfil a future need of 20 per 1000 population, which means that the total number of examinations will be 3000 per year or 60 per week
Nuclear Medicine Part 9. Quality Assurance64 Basic calculation *) depends on the type of camera
Nuclear Medicine Part 9. Quality Assurance65 If we assume that the number of hours per week a gammacamera can be effectively used for patient examinations to be 28 (70% of 40) then the number of cameras should be 66/28=2.4. This figure should be further corrected by taking into account the time needed for regular maintenance of the equipment as well as unplanned stops due to different failures. Result Number of cameras
Nuclear Medicine Part 9. Quality Assurance66 End of step 1
Nuclear Medicine Part 9. Quality Assurance67 Let the vendor define Your needs and make the selection Write a tender document and distribute it to the vendors
Nuclear Medicine Part 9. Quality Assurance68 Choice of equipment Type of procedure to be undertaken Technical specifications Manufacturer Spare parts Service and maintenance User and service manuals Education and training Local user Service and maintenance Education and experience of staff Siting of the instrument Ease, reliability and safety in operation Cost
Nuclear Medicine Part 9. Quality Assurance69 Siting of equipment Sufficient space Electrical power Environmental factors (temperature, humidity, air pollution) Structural shielding Background radiation
Nuclear Medicine Part 9. Quality Assurance70 MAINTENANCE Regular maintenance will result in: Increased availability of equipment Increased quality by better performance Increased safety Increased lifetime of equipment
Nuclear Medicine Part 9. Quality Assurance71 Maintenance procedures should include consideration of the following: Overall management of the maintenance programme. This is often provided by the medical physicist in co-operation with the RPO; Measures to prevent the use of equipment during periods of maintenance; Notification of the medical physicist whenever there is a repair, regardless of its importance. The physicist must assess whether any tests or measurements are to be made and whether the equipment is operating satisfactorily before it is used with patients; Provision of a service contract covering preventative maintenance, particularly when equipment parts and expertise are provided by the manufacturer; Maintenance of a service record during the lifetime of the equipment or for a duration specified by the Regulatory Authority.
Nuclear Medicine Part 9. Quality Assurance72 EQUIPMENTEQUIPMENT Well trained staff with access to manuals and other documentation. Quality control program. Regular maintenance. Well trained staff with access to manuals and other documentation. Quality control program. Regular maintenance. NEEDS FOR EFFICIENT USE
Nuclear Medicine Part 9. Quality Assurance73 Purpose of tendering The purpose of tendering for gamma cameras is to assess the best match between the requirements of the clinical department and the equipment available and not necessarily to buy the 'best camera’.
Nuclear Medicine Part 9. Quality Assurance74 What do we want? Hardware One, two or three detector heads? Round, square or rectangular detector? Crystal thickness? Collimators? Whole body scanning? PET-option? Transmission source?
Nuclear Medicine Part 9. Quality Assurance75 What do we want? Computer & software Acquisition modes? Application programmes? Network? Storage capacity? Backup?
Nuclear Medicine Part 9. Quality Assurance76 What do we want? More... Education and training Payment Warranty Reliability Service and maintenance List of users Manuals and other documentation Time of delivery Upgradability Quality control equipment Acceptance test
Nuclear Medicine Part 9. Quality Assurance77 System overview Contact persons Commercial specifications Technical specifications Data acquisition and processing Electrical and mechanical safety (national regulations) Education and training Documentation Service organization Installation and acceptance testing The tender document should therefore include:
Nuclear Medicine Part 9. Quality Assurance78 Commercial specifications: Price Payment Warranty Liability insurance for installers Right to refuse or remove equipment Value of the old camera What shall the vendor specify?
Nuclear Medicine Part 9. Quality Assurance79 Hardware: Crystal size and shape PM-tubes Gantry dimension and weight Gantry movements, including auto- contour Electrical power requirements Imaging table Collimators and method of change Shielding of detector Operating console Energy windows Energy range Safety features Motion control What shall the vendor specify?
Nuclear Medicine Part 9. Quality Assurance80 Technical performance: Linearity Uniformity (different energies, different angles) Energy resolution Spatial resolution (intrinsic and system, planar and tomographic) Count rate performance Center of rotation Multiple window spatial positioning System sensitivity (planar and tomographic) Point source sensitivity What shall the vendor specify?
Nuclear Medicine Part 9. Quality Assurance81 Computer system: Acquisition modes Basic application programmes Clinical application programmes Quality control programmes DICOM-standard Network and communication Printers Storage and backup of patient data What shall the vendor specify?
Nuclear Medicine Part 9. Quality Assurance82 …..and more: User lists and site visits Reliability (e.g. 95%) Service response time and follow up Training now and later Service manuals Upgradability Delivery, setup and installation date Floor loading, elevators and doors Electrical requirements What shall the vendor specify?
Nuclear Medicine Part 9. Quality Assurance83 Distribute the tender documents to the vendors RELAX! End of step 2
Nuclear Medicine Part 9. Quality Assurance84 The decision: Which camera fulfills our requirements?
Nuclear Medicine Part 9. Quality Assurance85 Can the camera and the computer software be used efficiently for all types of intended examinations? Are the technical specifications satisfactory? Is the camera easy to handle? Is the price reasonable? Is the manufacturers service organization satisfactory? Is the required training OK? The decision
Nuclear Medicine Part 9. Quality Assurance86 Site visits
Nuclear Medicine Part 9. Quality Assurance87 The decision- End of step 3 Manufacturer 1 + price + technical parameters - service - computer system Manufacturer 2 + price - technical parameters + service - computer system We want that one!!
Nuclear Medicine Part 9. Quality Assurance88 Make a clear and detailed specification of the implemen- tation agreement. Which are the users responsibilities? Which are the vendors responsibilities? Which documents are valid? Date of delivery? Mode of payment? Warranty? Sign the contract Make the installation Perform an acceptance test
Nuclear Medicine Part 9. Quality Assurance89 QUALITY CONTROL EQUIPMENT Acceptance / reference testing. Measurements to assess whether instrumentation comply with its specifications. Manual available. Routine testing. Performed to maintain high quality and standard of the equipment. Analysis of results. Is the observed result significantly different from the reference testing? Is the observed result due to errors in the QC procedure? Records.
Nuclear Medicine Part 9. Quality Assurance90 Acceptance tests X-ray installations 171 Passed 10 Passed after minor corrections 123 Not passed 38 (SSI 1992)
Nuclear Medicine Part 9. Quality Assurance91 Acceptance Daily Weekly Yearly UniformityPTTP Uniformity, tomographyPP Spectrum displayPTTP Energy resolutionPP SensitivityPTP Pixel sizePTP Center of rotationPTP LinearityPP ResolutionPP Count lossesPP Multiple window posPP Total performance phantomPP P: physicist, T: technician QC GAMMA CAMERA
Module 9.6. Education and training Part 9. Quality Assurance IAEA Training Material on Radiation Protection in Nuclear Medicine
Nuclear Medicine Part 9. Quality Assurance93 How to achieve a high standard of safety in a hospital? Safety culture Support from the hospital management Well educated staff Local radiation protection organization Quality assurance programme Use of authorized services Continuing education and training Arrangements for individual monitoring and health surveillance Records Documented local rules and procedures
Nuclear Medicine Part 9. Quality Assurance94 Education and Training are essential for a radiation protection programme l As part of a the implementation of a Radiation Protection Programme (IAEA TECDOC 1040, 2.2.1): “Early in the process a decision should be made about additional training required for the hospital staff…” l The relevant plan should include who, where and when shall be trained.
Nuclear Medicine Part 9. Quality Assurance95 Responsibility of the licensee l BSS 2.30.: “Provision shall be made for reducing as far as practicable the contribution of human error to accidents and other events that could give rise to exposures, by ensuring that: (a)all personnel on whom protection and safety depend be appropriately trained and qualified so that they understand their responsibilities and perform their duties with appropriate judgement and according to defined procedures;”
Nuclear Medicine Part 9. Quality Assurance96 Education l All staff in nuclear medicine must have appropriate education to perform their duties… l For radiation protection purposes this affects particularly: n Radiation Protection Officer n Physician n Qualified Expert (Medical Physicist) n Nuclear Medicine Technician n ….
Nuclear Medicine Part 9. Quality Assurance97 Personnel shall be instructed in radiation protection before assuming duties: the conditions of the licence; safe use and operation of equipment; instructions that should be provided to patients and patient helpers; institutional radiation protection policies and procedures (including emergency practice drills); the local QA programme and QC procedures; the results of review and analysis of incidents and accidents that have occurred in the institution or elsewhere. Education and training
Nuclear Medicine Part 9. Quality Assurance98 A note of qualifications of others l There should also be a process in place which ensures that outside contractors on whom radiation protection may depend (e.g. service engineers) are appropriately trained and qualified.
Nuclear Medicine Part 9. Quality Assurance99 EDUCATION AND TRAINING In addition to the staff working within the nuclear medicine department, the following staff should receive instruction from the RPO: nurses in wards with radioactive patients; staff who do not belong to the nuclear medicine practice but need to enter controlled areas; and staff who transport radioactive patients or radioactive materials within the institution.
Nuclear Medicine Part 9. Quality Assurance100 EDUCATION AND TRAINING * Basic and continuing training for those who have responsibilities for the operation of the equipment or for preparations of radio- pharmaceuticals. * Advanced training for physicians, physicists and radiochemists. * Continuing education for those who have operational responsibilities in a nuclear medicine facility.
Nuclear Medicine Part 9. Quality Assurance101 Continuing Education l It is essential for all staff to have regular updates on radiation protection aspects l Continuing education must be documented
Nuclear Medicine Part 9. Quality Assurance102 Education and Training l If the number of professionals is too small to justify setting up a training course, then international co-operation programs may be used l Distance learning programs may be useful l A course such as the present may play an important role...
Nuclear Medicine Part 9. Quality Assurance103 EDUCATION AND TRAINING Continuing education in annual refresher training courses, and whenever there is a significant change in duties, regulations, terms of the license, or type of radioactive material or instruments used. Topics should be selected from a syllabus which has been approved by the RPC. Today we will talk about Patient safety
Nuclear Medicine Part 9. Quality Assurance104 Radiation protection training programme Basic radiation physics. Biological effects of radiation. International standards in Radiation Protection Responsibility and duties. Safe handling of radioactive materials. Occupational radiation protection. Medical exposure. Management of radioactive waste. Protection of the public. Emergency preparedness. Organization of radiation protection
Nuclear Medicine Part 9. Quality Assurance105 Training Record The records should include the following information: (a) Name of the person(s) who delivered the instruction or training; (b) Name of the person(s) who received the instruction or training; (c) Date and duration of the instruction or training; (d) List of the topics addressed; (e) Copy of the certificates of training
Nuclear Medicine Part 9. Quality Assurance106 Education & Training l The Regulatory Authority should establish training curricula for (for example) : RPOs members of the RPC relevant physicians medical physicists laboratory staff
Nuclear Medicine Part 9. Quality Assurance107 The role of Regulatory Authority Require key personnel (named in RPP) to be duly accredited/qualified and to have adequate training in radiation protection. Specify/approve minimum training standards/syllabus content for radiation protection training courses. Provide training courses, perhaps in conjunction with other contributors, if courses are otherwise unavailable in the country.
Nuclear Medicine Part 9. Quality Assurance108 Continuous Quality Improvement l CQI - many other acronyms are available for this l Part of virtually all QA systems l Improved methods are documented in clinical trial reports. l Quality assurance protocols are continuously under development in many countries l Regular Quality Assurance meeting for all members of a Section l Continuing education - lectures, workshops, journal clubs and must be available for all staff
Nuclear Medicine Part 9. Quality Assurance109 And finally: QA is not a threat, it is an opportunity l It is essential in a QA program that all staff feel free to report errors l A non threatening environment must exist l Reward honesty with encouragement l Education is the key, not punishment
Nuclear Medicine Part 9. Quality Assurance110 What is this? Communication!
Nuclear Medicine Part 9. Quality Assurance111 Questions?
Nuclear Medicine Part 9. Quality Assurance112 DISCUSSION How should the quality of a nuclear medicine practice be measured?
Nuclear Medicine Part 9. Quality Assurance113 DISCUSSION Discuss the responsibilities in QA for the different members of the nuclear medicine staff.
Nuclear Medicine Part 9. Quality Assurance114 DISCUSSION Which one of the following practices has the highest quality of the practice: 1.The most modern equipment and unqualified persons running it. 2.Old equipment and qualified people running it.
Nuclear Medicine Part 9. Quality Assurance115 Where to Get More Information l Further readings n IAEA TECDOC 602 n Basic Safety Standards n WHO publications n ISO publications