Download presentation
Presentation is loading. Please wait.
1
ALTECH ENGINEERING COMPANY
THE ‘NEW’ DESIGNERS, BUILDERS OF CUSTOM MACHINERY SINCE 1964 Visit us at:
2
ALTECH ENGINEERING COMPANY
THE ‘NEW’ FRICTION FORMULATION & RECIPES Process Implementation Technology & Know How 800 Litre and Up Capacity Mixers Mixer for Wet and Dry Friction Formulations Visit us at:
3
ALTECH ENGINEERING COMPANY
THE ‘NEW’ BRAKE LINING TECHNOLOGY Rolling Mill for Shoe Brake Linings Output 80 Feet Per Minute Visit us at:
4
ALTECH ENGINEERING COMPANY
THE ‘NEW’ PREFORM MACHINES 170 – 250 Ton, Dual Layer I.M. Preforms and/or Truck Block and Segment Preforms 70 and 100 Ton Single and Dual Layer Preforms Visit us at:
5
ALTECH ENGINEERING COMPANY
THE ‘NEW’ MULTIPLE DAYLIGHT CURE PRESSES 400 Ton I.M. Parts Curing 600 and 800 Ton Truck Block and Segment Curing Visit us at:
6
ALTECH ENGINEERING COMPANY
THE ‘NEW’ GRINDING SLOTTING & CHAMFER MACHINES Grinding Truck Blocks and Segments Inside Outside Grinder for Linings Grinding I.M. Parts Visit us at:
7
ALTECH ENGINEERING COMPANY
THE ‘NEW’ DRILLING MACHINES Drilling for Riveted Disc Pads Drilling Truck Blocks and Segment Visit us at:
8
ALTECH ENGINEERING COMPANY
THE ‘NEW’ HORIZONTAL AND VERTICAL PRESSES HYDRAULIC PRESSES 200, 250, 400 and 600 TON WITH CYCLE TIMES BETTER THAN 60 STROKES PER MINUTE Small footprint Press Visit us at:
9
ALTECH ENGINEERING COMPANY
THE ‘NEW’ LOW COST (1200 PPM) PRODUCTION CELLS FLASH MOLDING I.M. PRODUCTION CELL COMPRISING: 800-LITER MIXER TWO PREFORM MACHINES TWO CURE PRESS MACHINES ONE GRINDER, CHAMFER, SLOTTER MACHINE ONE PAINT LINE, PAINT CURING AND MARKING POSITIVE MOLDING I.M. PRODUCTION CELL COMPRISING: 800-LITER MIXER TWO POSITIVE MOLDING MACHINES ONE GRINDER, SLOTTER MACHINE (CHAMFER OPTIONAL) ONE PAINT LINE, PAINT CURING AND MARKING PRODUCTION 1200 PARTS PER HOUR Visit us at:
10
ALTECH ENGINEERING COMPANY
THE ‘NEW’ PROCESS IMPLEMENTATION TECHNOLOGY EIDM1 – EXTRACTION, INSERTION, & DE-MOLDING DW1 – DUAL WEIGH SYSTEM C414PM PRESS Positive Molding System CURE SECTION FRICTION MATERIAL HOPPER COOLING SECTION TRANSFER MOLD INNER TRANSFER MOLD OUTER PUSH BUTTON STATION HYDRAULIC POWER UNIT PC1 – POST CURE OVEN GS2 – DISC BRAKE PAD FINISHING CELL CONVEYOR FOR INNERS/OUTERS S8 MARKING SYSTEM CP1 – POWERED BRUSH Visit us at:
11
ALTECH ENGINEERING COMPANY
THE ‘NEW’ ALTECH SUPPORT SERVICES OPERATOR FLASH MOLDING PRODUCTION CELL TRAINING OPERATOR POSITIVE MOLDING PRODUCTION CELL TRAINING Don’t wait for Service… Get Altech for all your support needs Visit us at:
12
ALTECH ENGINEERING COMPANY
THE ‘NEW’ INFORMATION TECHNOLOGY ALL ALTECH SYSTEMS MAY BE SUPPLIED WITH ETHERNET CONNECTIONS FOR DATA ACQUISITION & REMOTE DIAGNOSTICS Visit us at:
Similar presentations
