Presentation on theme: "LV Compensation and Filtering Give Oxygen to your electrical network"— Presentation transcript:
1 LV Compensation and Filtering Give Oxygen to your electrical network Varplus² capacitorsVarlogic N controllerDetuned ReactorLC1-D contactorsVarpact modulesComponentsModules
2 VARPLUS² : the range Give Oxygen to your electrical network A fully modular offer with only one size for installation and connectionMaximum power per unit : 20 kvar at 50 HzInstallation in all positionsPossibility of wiring connection at 360°50 Hz or 60 HzAdditional options :IP 20/42 protection kit2 bus bars set connection between capacitors
3 VARPLUS² : the range Give Oxygen to your electrical network Assembly of capacitorsConnection with bus bars kit or you can build your own bus bars if you preferAdditional IP 20/42 protection kit
4 Varlogic N controller Give Oxygen to your electrical network Varlogic NR6 / NR12 :Analyse and inform about data of the networkManage the reactive power to obtain the targeted cosφCheck the proper working of the systemEasy use thanks to the auto settingSimple reading of the main measures
5 Varlogic N controller Give Oxygen to your electrical network A higher level of expertness : more than the NR6/NR12 Varlogic, the NRC12 Varlogic brings :More measures : total current harmonic distortion THD(I), voltage and current harmonic spectrumAnswer to specific applications : 4 quadrant operation for generator application, possibility of dual cos j target, medium voltage application, fixed step configuration programmingSimple interface with a graphic screen, help menuA communicating controllerCommunication RS485 Modbus set as an option
6 Detuned Reactor Give Oxygen to your electrical network Detuned Reactors :The detuned reactors are 3-phase inductances, designed to protect the capacitors and prevent amplification of the harmonics present on the network.The range is going from 6 to 100 kvar, for 400/415V network voltage at 50 Hz. Three tuning orders are available (135, 190 et 215 Hz)Safety thanks to the temperature sensor (allow the protection)Dry type very few maintenance
7 LC1 – D contactors Give Oxygen to your electrical network The use of standard contactors may compromise the safety of persons and installations (capacitor control is accompanied by transient operating conditions resulting from the capacitor load which, amongst other thing, generates a very high overcurrent equivalent to a short-circuit of short duration)The LC1-D K contactors are specially designed for capacitor control.They are fitted with a contact block allowing the current to pass on closing and with damping resistors limiting the current on energisation.
8 VARPACT : the range Give Oxygen to your electrical network A pre-wired assembly, ready to be installed in the bank.Capacitors, commutation function, protection function are already incorporated inside VARPACTIt will allow you to build your capacitors bank in a very short time.Maximum power for 1 module : 120 kvar at 50 HzTested at 100% inside Schneider plantWith or without bus bars : you have the choice.
9 VARPACT : installation Give the right specifications Installation of modules in the cubicle :Varpact without bus bars :Varpact with bus bars :