We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byBrendan Brisker
Modified over 4 years ago
Hofmann Alignment Adjustment Features Training A-ARM Adjustment
Why would the Technician want to make an adjustment?
Low Caster on right side and High Camber on right side resulting in a Pull condition to the Right.
This Screen is indicating to move the front of the Upper A-Arm in, and the rear of the Upper A-Arm in
Select the Jack icon to Toggle from Elevated or Turntable adjustment
If the adjustments are on the Lower Control Arm, Click on the icon to Toggle to the Lower A Arm
It would now be necessary to move the Lower A-Arm out at the front and out at the rear
As you move the A-Arm, in the indicated direction, the scale will move towards the center.
This screen shows the left side adjustment
Because the left side is near desired, the Technician may skip past the left side adjust screen by clicking on the green icon
Caster and Camber adjustments will normally change the Toe setting. It will now be necessary to adjust the Toe
A-Arm adjust mode will use the preferred specification as the desired end result. If a setting other than preferred is desired, edit the specifications and make the desired setting the preferred
Caster and Camber set to factory preferred Preferred Caster and Camber altered to help offset road crown pull
Steering axis inclination
Bring up the graph you want to copy. Click on the Format this page for printing icon. A new window without the left navigation or header information will.
Guide to Making Figures Kyle Patrick Matt Nelson Sarah Smith.
How to Add a Proper Heading To a Word Document Michelle Lowe – Media Specialist – 12/4/2013.
Click on the rectangle on the lower right-hand side of the screen. This will quickly clear your desktop.
Getting Your GMC Under Control Control Arm Presentation Steve Ferguson.
Hofmann Alignment Adjustment Features Training EZ Toe.
Alignment Fundamentals Part One
Autodesk Inventor: Part 3 Creating a Drawing Once a part has been finalized and fitted into the assembly, a Drawing needs to be made, so a diagram of the.
MS-Word XP Lesson 2. Page Setup & Margins 1.Click on file menu 2.Click on page set up menu item 3.Select margins tab sheet (default activated) 4.Type.
Cover The Human Skeleton A journey around your bones… Click here to start…here Esc.
CGDD 4113 ROUGHING IN CHARACTERS. MAIN IDEA FOR THIS LECTURE Start with a polygon Get rough shape of body Tweak body.
Smart Cart Multimedia Lectern Technology Resource Center.
Digital StarLab Set-Up, Operation, Maintenance, and Teacher Manual for the Digital StarLab are in the links below or on the training tab in the BlackBoard.
Wheel Alignment CASTER.
Automotive Alignment Angles
Rear Suspension Systems
Control Arm Adjustment
© Copyright 2011 Hunter Engineering Company Diagnostic Angles.
© 2018 SlidePlayer.com Inc. All rights reserved.