Presentation on theme: "JIE Pond Pucks JIE Technologies Ltd. 2012 2 JIE Pond Pucks are made from non-toxic ingredients to mimic natural processes making them safe for fish and."— Presentation transcript:
JIE Pond Pucks JIE Technologies Ltd JIE Pond Pucks are made from non-toxic ingredients to mimic natural processes making them safe for fish and invertebrates.
Our Solution JIE Technologies Ltd JIE Pond Pucks doesnt try to kill the algae We attack the source of the problem by inhibiting the growth. We break the growth cycle early, during the first stage of growth Preventing the formation of floating algae mats.
Interrupting the cycle JIE Technologies Ltd One of the ingredients is pulverized barley, it triggers a chemical reaction as it breaks down. The interaction of sunlight with peroxide and barley release organic acids (humics) that inhibit algae growth. These humic and fulvic acids, along with increased levels of oxygen form a difficult environment for algae to begin its growth cycle.
JIE Pond Pucks in Action JIE Technologies Ltd Click on black image to see video. It will start in 10 seconds.
How it works JIE Technologies Ltd
7 How it works
JIE Technologies Ltd How it works
Efficient use of Bacteria JIE Technologies Ltd For bacteria to be effective in pond treatment it must be able to germinate and multiple rapidly once introduced to a pond. JIE Pond Pucks may seem simple but there is a lot of engineering involved in its design and function to provide bacteria with an ideal environment. Along with oxygen, JIE Pond Pucks release a buffer component. Although the buffer does not change the pH in the entire pond, it does correct the pH in the small micro environment surrounding the bacteria de-hydrate. This enhances the success of the dormant bacteria to germinate once they are re-hydrated because the surrounding water is rich in oxygen and at a desired pH level.
Diverting the nutrients JIE Technologies Ltd JIE Pond Pucks lowers dissolved Phosphorus by the agglomeration (flocculation ) process which helps limit algae growth in the water. These buried nutrients in the bottom sediments are available for the growth of rooted aquatic plants such as those which grow along the shore line of a pond; emergent species. Emergent species are beneficial because they can filter the water entering a pond taking up nutrients into their biomass.
Keys to success JIE Technologies Ltd surface acre is 200 ft x 200 ft 2kg of product for each surface acre Insert Pucks 1 meter from bank and 3 meters apart on a clear sunny day Ensure they are submerged under any algae mat The remainder of the dosage is spread in the center
Early Season Application Correct Environment Any body of water that can grow algae will be an ideal environment The depth of water does not matter to the success of the products. If copper sulfate type products have been used we recommend waiting two weeks after last installation before the first application of the Pucks. The starting dates could vary some based on geographic locations and the general rule is to begin applications when water temperature is near 10 C. The key is to follow the monthly application intervals as listed in this dosage program. JIE Technologies Ltd
1.First ApplicationApril 1 st. 2.5 kg Puck Pond Clarifier kg Augmentation Puck per surface acre 2. Second ApplicationMay 1 st. 1.5 kg Augmentation Puck per surface acre 3. Third ApplicationJune 1 st. 2.5 kg Puck Pond Clarifier per surface acre 4. Fourth ApplicationJuly 1 st. 1.5 kg Augmentation Puck per surface acre 5. Fifth ApplicationAugust 1 st. 2.5kg Puck Pond Clarifier per surface acre 6. Sixth ApplicationSeptember 1 st. 1.5 kg Augmentation Puck per surface acre Schedule
Overall effect JIE Technologies Ltd After application a film develops on the surface. This will sink within a couple of days You will see clear water after 5 to 7 days The Pucks may raise and fall several times This will prevent the formation of floating algae mats. The bottom sediment will breakdown properly. Unpleasant odors will be prevented from forming.