Presentation is loading. Please wait.

Presentation is loading. Please wait.

350, 350XL 1¼ - 2. Modification Overview Production of the 1¼-2 350 began in 2004 and is current. Production of the 1¼-2 350 began in 2004 and is current.

Similar presentations


Presentation on theme: "350, 350XL 1¼ - 2. Modification Overview Production of the 1¼-2 350 began in 2004 and is current. Production of the 1¼-2 350 began in 2004 and is current."— Presentation transcript:

1 350, 350XL 1¼ - 2

2 Modification Overview Production of the 1¼ began in 2004 and is current. Production of the 1¼ began in 2004 and is current. The lead free version 350XL was introduced in The lead free version 350XL was introduced in 2010.

3 Check Housing Removal The plastic housing (vessel) must be removed for service. The plastic housing (vessel) must be removed for service. There is no spring load. There is no spring load. Housing is bolted and o-ring sealed. Housing is bolted and o-ring sealed. Remove the four housing bolts. Remove the four housing bolts. Lift the vessel up and out. Lift the vessel up and out.

4 Check Valve Removal The check valves are held in place by a closure sleeve. The check valves are held in place by a closure sleeve. Gently pry the closure sleeve away from the body. Gently pry the closure sleeve away from the body. Both modules must slide out of the housing. Both modules must slide out of the housing. Use a short blunt object on a flat surface to push against the #2 check. Use a short blunt object on a flat surface to push against the #2 check.

5 Check Valve Removal Make sure all test cocks are open to break any vacuum. Make sure all test cocks are open to break any vacuum. Push down on the body to slide the modules out. Push down on the body to slide the modules out.

6 Disassemble Check Module Hold the cage firmly and twist the seat counter-clockwise about ¼ turn. Hold the cage firmly and twist the seat counter-clockwise about ¼ turn. Check modules are spring loaded. Check modules are spring loaded.

7 Check Seat Removal The check seat is free once the module has been disassembled. The check seat is free once the module has been disassembled. If seat is damaged, the entire module must be replaced. If seat is damaged, the entire module must be replaced.

8 Check Disc Replacement The check disc and poppet are free once the module has been disassembled. The check disc and poppet are free once the module has been disassembled. The check disc is free once the retainer washer is removed. The check disc is free once the retainer washer is removed.

9 Check Valve Reassembly Notes Lubricate o-rings on check modules. Lubricate o-rings on check modules. #2 check slides into vessel first. #2 check slides into vessel first. Insert the #1 check and turn it until the spring retainer lines up with the notches on the #2 seat. Insert the #1 check and turn it until the spring retainer lines up with the notches on the #2 seat. Push both modules into the vessel. Push both modules into the vessel.

10 Check Valve Reassembly Notes Lubricate the o-ring on the closure sleeve and insert against the modules. Lubricate the o-ring on the closure sleeve and insert against the modules. Place on a flat surface and push down with a rocking motion until the sleeve seals with the vessel. Place on a flat surface and push down with a rocking motion until the sleeve seals with the vessel.

11 Housing Reassembly Notes Lubricate the inlet and outlet o-ring on the housing. Lubricate the inlet and outlet o-ring on the housing. Rock the vessel from side to side as it slides into position. Rock the vessel from side to side as it slides into position. * Note: Make sure the o-rings on both ends of the vessel stay in their groove as it slides into place.


Download ppt "350, 350XL 1¼ - 2. Modification Overview Production of the 1¼-2 350 began in 2004 and is current. Production of the 1¼-2 350 began in 2004 and is current."

Similar presentations


Ads by Google