Presentation on theme: "An Alternative Energy Solution for Medical Waste The Easy Fit."— Presentation transcript:
An Alternative Energy Solution for Medical Waste The Easy Fit
The Easy Fit Concept The industry for the treatment and disposal of waste from hospital institutions is an ever increasing challenge; risk of infectious diseases migrating outside the facilities; integrity of confidentiality; costs of disposal; odour migration. The Easy Fit technology is a solution that mitigates these challenges
The Easy Fit Concept The Easy Fit technology is a unique, one-of-a-kind, 1 tonne per day (2,662 lbs) system that is unparalleled in concept and capability to convert waste and garbage materials into thermal energy and over 400 litres per day of hot water. In a process that is as clean as if the thermal energy was produced by natural gas.
The Easy Fit Concept The Easy Fit meets the growing desires of Hospital Trusts who are now encouraging the control and responsibility of energy consumption and carbon reduction. With low cost, low maintenance, ease of use, plus the Easy Fits ability to convert waste to energy AT SOURCE, the Unit will provide a hospital with a valuable disposal option for waste.
The Easy Fit Concept Typically, the amount of medical waste could be lower if not contaminated by general waste which increases the overall disposal costs. The Easy Fit technology solves this problem by processing all of the waste categories regardless of cross contamination. The system requires minimal resource, space and staff time further reducing the costs for waste management.
The Easy Fit Concept The technology has the ability to process each of the five waste categories; medical, bio-hazardous, confidential, pharmaceutical and general waste onsite and at the same time is 100% energy efficient.
The Easy Fit Concept The units ultra low emissions are typical to that of a high efficiency natural gas boiler of the same size in thermal capacity. No unsightly stacks are required, only an exhaust vent with an exit temperature of approximately 70 degrees Celsius.
The Easy Fit Concept The Easy Fit solution achieves the highest levels of protection against migration of infectious diseases and pathogens from hospitals, virtually eliminates high cost disposal fees, reduces odours over current practices and produces a net energy balance during operation for energy input requirements
The Easy Fit Concept Small Footprint. 50 sq metres Height <3 metres * * Subject to Vent height over building QUICK FACT
The Easy Fit Concept Incorporates the NO FLAME Technology QUICK FACT
The Easy Fit Concept Incorporates S.M.A.R.T technology. QUICK FACT T Self Monitoring, Analysis and Reporting T echnology.
The Easy Fit Concept Cost less than £420,000 Pounds ( US$ 675,000 )* QUICK FACT * Target Cost. Excluding Delivery, Connections
Four Benefits to installing an Easy Fit Financial viability Localised onsite waste disposal to energy solution Low entry cost Fast permitting approvals; quick implementation time
Treatment for the Environment too! No indirect use of Landfill Reduced indirect use of Fossil Fuel Transportation Use of the Calorific value in the Waste
Expected Period of Debt Recovery Vs Tip Fee Revenues in Sterling Based on the Purchase price of the Easy Fit, plus estimated delivery and install cost the graph illustrates the possible period of time it would take to pay for the installation from Tip Fee cost.
Expected Period of Debt Recovery Vs Tip Fee Revenues US Dollars Based on the Purchase price of the Easy Fit, plus estimated delivery and install cost the graph illustrates the possible period of time it would take to pay for the installation from Tip Fee cost.
EPC Wrap can be included, the last piece of the jigsaw
BE SURE TO VISIT US ON- LINE WWW. The-EasyFit.com Dedicated Technology Site Corporate Site WWW. CHP-Ventures.com