Presentation is loading. Please wait.

Presentation is loading. Please wait.

GeneMapper 3.7 Tom Devitt 12/6/05. Password: dnapass User Name: gm (should be automatic)

Similar presentations


Presentation on theme: "GeneMapper 3.7 Tom Devitt 12/6/05. Password: dnapass User Name: gm (should be automatic)"— Presentation transcript:

1 GeneMapper 3.7 Tom Devitt 12/6/05

2 Password: dnapass User Name: gm (should be automatic)

3 File, add samples to project

4 Navigate to the folder containing your samples select Add to List

5 Then click Add & Analyze

6 Name your project (e.g. EXP40_ENS2)

7 To see if your run worked, select all samples (ctrl+A), and click Display Plots:

8 You will see peaks if your run worked. Play around with the buttons at the top to change the window size, colors, number of samples, etc., that are displayed.

9 Next, click on Panel Manager

10 New window will appear; in upper left corner, click on panel manager

11 Go to File -> new kit (name kit by locus); choose kit type from drop down menu (e.g. microsatellite)

12 Click once on the kit you just made Then File -> New Panel (name panel by locus)

13 Click once on the panel you just made Then File -> New Marker

14 Name marker by locus Specify color of your labeled primer specify min and max size of your marker ( bp) Specify marker repeat # (e.g., 4 for tetranucleotide)

15 Go back to kit, click once to highlight Then go to Bins -> New Bin Set

16 Name by locus Then close Panel Manager by clicking OK at the bottom of screen

17 Go back to project window, change panel name to the one you just made (ctrl+d to fill down) and REANALYZE with new panel chosen – hit green arrow button (otherwise reference data wont show up in panel manager when youre trying to autobin)

18 Go back to panel manager, select your marker (click once) then go to Bins -> Add Reference Data

19 A new window will appear; highlight the folder(s) containing your samples; click Add To List (theyll move to the right hand column); click Add

20 Then go to Bins, select Auto Bin Select Rounded basepair and Auto Bin and click OK Click OK to get out of Panel manager

21 Go back to project window and make a new analysis method: Click on a cell in the Analysis Method column, and select new analysis method A new window will appear; select Microsatellite and then OK

22 Under the General tab, name the Analysis Method by your locus; under the Allele tab, choose your Bin Set; then click ok

23 Reanalyze

24 Some additional notes... Check question marks in genotypes; delete them once youve checked them In the genotypes plot view, can move bins around as long as youre in Binning Mode When editing bins in the genotype plot, save a project AND DONT REANALYZE OR ADD SAMPLES SUBSEQUENTLY Can import bin sets and settings for subsequent samples for same locus (tip from RE Bingham)


Download ppt "GeneMapper 3.7 Tom Devitt 12/6/05. Password: dnapass User Name: gm (should be automatic)"

Similar presentations


Ads by Google