Presentation on theme: "Lava Ultimate CAD/CAM Restorative. Using a sanding or course rubber wheel, grind and smooth off sprue."— Presentation transcript:
Lava Ultimate CAD/CAM Restorative
Using a sanding or course rubber wheel, grind and smooth off sprue
Lava Ultimate CAD/CAM Restorative Using a #9 Robinson bristle brush, incorporate polishing paste into brush
Lava Ultimate CAD/CAM Restorative Apply to surface of restoration with low speed hand piece working slowly into surface and see luster within seconds
Lava Ultimate CAD/CAM Restorative Buff with muslin rag wheel
Lava Ultimate CAD/CAM Restorative Before and After Polishing Result After MilledPolished
Lava Ultimate CAD/CAM Restorative Adjust with Diamond Bur
Lava Ultimate CAD/CAM Restorative Finish Adjusted Area with Course and Medium Rubber Point Course Medium
Lava Ultimate CAD/CAM Restorative Dispense Polishing Paste and Polish High-shine polish adjustment area with intra-oral polishing paste and soft prophy brush
Lava Ultimate CAD/CAM Restorative Products Bristle Brush – #9 Soft Robinson Bristle brush Polishing paste – VH Technologies Diashine Fine Soft Extraoral Polishing – Premier Diamond Twist Paste SCO – Shofu Direct Dia Polishing Paste – Renfert OPAL Ref 520-0000 Intra-oral brush – Crescent® Latch Angle Soft Black Prophy Brush for Intraoral Use Intraoral polishing paste – VH Technologies Diashine Intraoral Polishing Paste – Shofu Direct Dia Polishing Paste Diashine is a registered trademark of VH Technologies. Diamond Twist Paste is a registered trademark of Premier. Direct Dia Polishing Paste is a registered trademark of Shofu. OPAL is a registered trademark of Renfert. Crescent is a registered trademark of DENTSPLY International.
Lava Ultimate CAD/CAM Restorative Characterization Pit and Fissure 1) Roughen area before staining. If needed, create space for stain (must maintain min. thickness per IFU.) 2) Apply Scotchbond Universal Adhesive. 3) Light cure. 4) Apply composite stain with brush, (i.e., Sinfony Magic Stain; Shofu Life Art; Kerr Kolor +Plus; Ivoclar Tetric Color) 5) Light cure. If required by the stain used, cover with thin layer of Filtek Supreme Ultra Flowable Restorative and cure. 6) Polish. Occlusal Surface Only! Life Art is a registered trademark of Shofu. Tetric Color is a registered trademark of Ivoclar.