Presentation is loading. Please wait.

Presentation is loading. Please wait.

Russell Robinson Sales Manager Europe, Middle East & Africa.

Similar presentations


Presentation on theme: "Russell Robinson Sales Manager Europe, Middle East & Africa."— Presentation transcript:

1 Russell Robinson Sales Manager Europe, Middle East & Africa

2 VISION STATEMENT Pressure Tech s vision is to achieve World wide recognition as a key manufacturer of stainless steel pressure regulators by offering exact solutions to all our customers. We will achieve this objective by continuous improvement, driven by product realisation, innovation, teamwork, and listening to the needs of our customers.

3

4 MANUFACTURER OF PRESSURE REGULATORS FOR THE OIL AND GAS MARKET GAS ANALYSER & INSTRUMENTATION HIGH PRESSURE & HYDRAULIC BACK PRESSURE HIGH FLOW

5 The function of a pressure regulator is to reduce a pressure and attempt to keep this pressure as constant as possible while the inlet pressure and the flow may vary. What is a Pressure Regulator?

6 Oil & Gas Range

7 LGC-690 Series Specially designed for control of low outlet pressures used on logic control systems Setpoint control within +/-1bar accuracy Balanced main, valve, Diaphragm sensed Lower entry access to seating cartridge with built in filter LF 690 Series Fully supported Main Valve within unique Seat Cartridge design to prevent chattering or unstable frequency resonance Up to 1380 bar Unique Ceramic seat for longer 5 times longer service life Bottom entry access to seating area for quick servicing in situ High Pressure - Liquid HYD-690 Series Compact Economical Hydraulic Regulator Dimensional interchangeable with Tescom Metal to metal seat (oil service only). Segregated captured vent

8 BP-LF690 Series Low flow back pressure regulator Cv of 0.1 Metal-to-metal seat Control pressure up to 690 bar BP-MF690 Series Unique Ceramic seat for longer 5 times longer service life Control pressure up to 690 bar Cv up to 1.5 Air actuated option available Medium Flow/Back Pressure MF-414H Series Unique Ceramic seat for longer 5 times longer service life Balanced Main Valve Cv of 2.0 Segregated Captured Vent

9 Sub Sea Applications The set pressure topside is referenced to the external depth of seawater pressure which directly increases the outlet pressure by a 1:1 ratio. Working with Cameron on sub sea application at 1300m depth. Will the seawater pressure be directly applied to the spring chamber area, or will there be an oil transfer chamber to protect the spring? If the seawater is in direct contact, and the spring is permanently submerged, we recommend to change the load spring to an elgiloy material, which will reflect in the pricing. Is the regulator in a permanent subsea installation or accessible for servicing?

10 LF-690 Series Fully supported Main Valve within unique Seat Cartridge design to prevent chattering or unstable frequency resonance Up to 1380 bar Unique Ceramic seat for longer 5 times longer service life Bottom entry access to seating area for quick servicing in situ Coated or Elgiloy load spring available for corrosion resistance against sea water Operating Depths to 1300m Sub Sea MF-414 Series Unique Ceramic seat for longer 5 times longer service life Balanced Main Valve Cv of 2.0 Segregated Captured Vent Coated or Elgiloy load spring available for corrosion resistance against sea water Operating Depths to 1300m

11 Sub Sea

12

13 Hydraulic LF ,000psi inlet/outlet range Ceramic seat design for water glycol applications outperforms metal seated alternatives Unique seating design to reduce unstable control or frequency resonance Bottom entry access plug to drastically reduce service time Segregated captured vent Range of high quality machined sensing elements for precise and stable control Load bearings with large handwheel for low torque adjustment Baffle plate to protect the sensing element from the high velocity inlet pressure - encountered when the main valve opens

14 HYDRAULIC CONTROL SYSTEM OIL RIG SUBSEA DISTRIBUTION EXAMPLE SYSTEM & SUPPLY APPLICATION

15 Innovative Ceramic Design Effects of Water Glycol under high pressure high flow conditions

16 Innovative Ceramic Design Valve Open Position: NEW Ceramic Combination Shuttle Secure in Cartridge Cartridge takes out pulsations and improves dampening effect Ball and Seat centrally located in Cartridge and Shuttle Ball Secure in Shuttle Pressure Tech Design

17 Ceramic seating lasts 5 to 20 times longer Rods of test materials (10mm diameter, 30mm long) were placed in the outlet stream of a high pressure water jet under the conditions indicated. The volume loss of each material was measured as a relative percentage of the volume loss from a 316 stainless steel control pin. The wear performance of the TX2000 is some 5-18 times better than that of the WC material

18 10,000psi design 15,000psi design Reduced cross holes increases dampening effect and stable control but restricts flow capacity INCREASED DAMPENING DESIGN

19

20 Sample Customers SYSTEM BUILDERS TIS (ABERDEEN) QHS (ABERDEEN) WEATHERFORDS PROSERV CRE-8 FLUTROL (BRAZIL) TYCO (UK) FRAMES (HOLLAND) VETCO GRAY (AUSTRALIA) BG GROUP (TUNISIA) SCANA (KOREA)

21 HF-250H/251H Series Balanced main valve Max inlet pressure 250 bar Vespel Seat Cv of ½ Threaded or flanged options Bottom entry access for easy and low cost servicing High Flow HF-300H/HF301H Series Balanced main valve Max inlet pressure 300 bar Vespel seat Cv of Threaded or flanged options Bottom entry access for easy and low cost servicing

22 HF-200H/201H Series Balanced main valve Max inlet pressure 200 bar Vespel Seat Cv of Threaded or flanged options Bottom entry access for easy and low cost servicing High Flow HF-210H/HF211H Series Balanced main valve Max inlet pressure 210 bar Vespel seat Cv of Threaded or flanged options Bottom entry access for easy and low cost servicing

23 What we need to know Inlet Pressure.Inlet Pressure. Outlet pressure.Outlet pressure. Flow rateFlow rate Media.Media. TemperatureTemperature None venting or self venting (captured or none captured)None venting or self venting (captured or none captured) Connection type and sizeConnection type and size Porting configurationPorting configuration Materials of constructionMaterials of construction Heated Regulators require additional informationHeated Regulators require additional information

24 What we need to know

25 Can you please inform us on availability and feasibility of your pressure regulators for tube trailers. It seems that we have fairly good chance to develop that business here in China. This is a typical inquiry from local gas company: Diaphragm pressure regulator Pin: 200 bar Pout: 10, option 20 bar Gases: H2, He, N2, Ar, O2, CNG Material: SS (316L) Connectors: VCR (1/2) or NPT (3/4 or 1/2") Cv > 2.0

26 What we need to know Can you please inform us on availability and feasibility of your pressure regulators for tube trailers. It seems that we have fairly good chance to develop that business here in China. This is a typical inquiry from local gas company: Diaphragm pressure regulator Pin: 200 bar Pout: 10, option 20 bar Gases: H2, He, N2, Ar, O2, CNG Material: SS (316L) Connectors: VCR (1/2) or NPT (3/4 or 1/2") Cv > 2.0 MF-300 MF-414 MF-400

27 Tak for din opmærksomhed


Download ppt "Russell Robinson Sales Manager Europe, Middle East & Africa."

Similar presentations


Ads by Google