Presentation is loading. Please wait.

Presentation is loading. Please wait.

October 2013 PL-T Horizontal Burning Instructions Reema Sharma.

Similar presentations


Presentation on theme: "October 2013 PL-T Horizontal Burning Instructions Reema Sharma."— Presentation transcript:

1 October 2013 PL-T Horizontal Burning Instructions Reema Sharma

2 2 Philips PL-T Bended Lamp Installation When Philips PL-T Bended* lamps are installed in horizontal position, the Philips etch should be positioned facing UP, or as close as possible if the sockets are at an angle. *PL-T Bended lamps consist of 3 bended tubes linked together in two places. Philips Etch

3 3 Philips PL-T Bridged Lamp Installation When Philips PL-T Bridged* lamps are installed in horizontal position, the Philips etch should be positioned facing DOWN, or as close as possible if the sockets are at an angle. *PL-T Bridged lamps consist of six straight tubes linked together in five places. Philips Etch

4 4 Literature Product Bulletins: Bended and Bridged including XEW

5 5 For horizontal application, install lamp with etch facing down Pour une application horizontale, installer la lampe gravure vers le bas Inner box packaging (example)


Download ppt "October 2013 PL-T Horizontal Burning Instructions Reema Sharma."

Similar presentations


Ads by Google