Presentation is loading. Please wait.

Presentation is loading. Please wait.

Balloon Car Rocket Project Erin B. Trevor S. Emily B. Hour 2.

Similar presentations


Presentation on theme: "Balloon Car Rocket Project Erin B. Trevor S. Emily B. Hour 2."— Presentation transcript:

1 Balloon Car Rocket Project Erin B. Trevor S. Emily B. Hour 2

2 Introduction Distance Traveled: 2.5 meters Mass: 39.7 grams Special Features: The car has a 3 straw nozzle for enhanced acceleration. Design Strategy: We used a water bottle for a lightweight design. We also had a straw as a nozzle because then we could direct the airflow. By directing the airflow, our car could achieve maximum distance and speed.

3 Introduction: Group Roles Emily: brought our cars wheels (Vitamin Water caps) and nozzle (straws) contributed by devoting her class time and bringing it home for the weekend to finish building and testing the car was the Recorder Erin: brought the tape and rubber bands to put our car together. also our project manager because she helped out in every aspect to reach optimal performance. put together the powerpoint once everyone added their information to Google Docs Trevor: brought in the water bottle and axles (bamboo skewers). thought of the car design, which gives him the Engineer role. carried out the design plan with the group for help to correct errors and enhance the car design if needed

4 Results The 1st experiment we did was to figure out how to make our current nozzle (3 straws) work. At first, we tried to keep the balloon on the nozzle with 1 rubber band, but the air came out of the balloon when I blew. Next, we tried putting on a couple of rubber bands, and the balloon was able to be blown up, which made the car move.

5 Results Our next experiment was to figure out what wheels helped the car to move quickly. We tried using bottle caps from sparkling water because there werent many ridges on it, so we thought that there would be less friction. The wheels didnt work as well as wed hoped, so we tried Vitamin Water caps next. They had tiny ridges, which would decrease the amount of friction between the car and the floor. The wheels ended up working very well, and the car could move quickly.

6 Research Our group watched this video to get more information on Newtons 3 Laws. We used the information from this video and applied it to our car. &feature=player_detailpagehttp://www.youtube.com/watch?v=iH48Lc7wq0U &feature=player_detailpage We also used this video to help us better understand Newtons 3 Laws of Motion.

7 Newtons 1 st Law definition: An object at rest stays at rest unless acted upon by a force. Any object with acceleration requires a force At the start, our car was at rest. It didnt move until it was acted upon by the air blowing out of the balloon. The air blowing out is the unbalanced force acting upon it. These are the straws we used to help the car move.

8 Newtons 2 nd Law the force needed to accelerate an object equals the mass of the object multiplied by its acceleration it will have more acceleration if its mass is less We made sure that our car didnt have a lot of mass so that there would be less force acting on it and it would have more acceleration. The mass of this car greatly affected the distance of this car.

9 Newtons 3 rd Law Definition: For every action, there is an equal and opposite reaction. This law was very important to our car. The air blew out of the balloon, causing the car to go in the opposite direction The straws helped push the air out of the balloon, making the car move in the opposite direction.


Download ppt "Balloon Car Rocket Project Erin B. Trevor S. Emily B. Hour 2."

Similar presentations


Ads by Google