Presentation on theme: "2.810 Team Car Project. 2.810 TEAMS 2002 GROUP A 1. Michelle Bernson 2. Amber Chesborough 3. Satish Krishnan 4. Kevin Schwain 5. Amy Vallely GROUP B 1."— Presentation transcript:
2.810 TEAMS 2002 GROUP A 1. Michelle Bernson 2. Amber Chesborough 3. Satish Krishnan 4. Kevin Schwain 5. Amy Vallely GROUP B 1. Steve King 2. Anthony Faranca 3. Yulia Frenkel 4. Chris Pandolfo 5. Cameron Price GROUP C 1. Craig Forest 2. Stanley Jurga 3. Devin McCombie 4. Hal Lieber 5. John Penney 6. Phil Shaltis GROUP D 1. Rick Anthony 2. Anthony Gambell 3. Steve Herren 4. Matt Joing 5. Venkatesh Rao
Processes: 1. CNC Machining (sand casting pattern + misc.) 2. Thermoforming (shell) 3. Injection Molding (wheel) 4. Sand Casting or Sheet Metal Forming (chassis) 5. Assembly (lots of it)
Schedule 2002 Sept 9 or 11-MasterCAM Lecture Sept 18-Pattern Design Discussion October 23-CAD Drawings Due October 28-Pattern Machined for Foundry (this week) and One paragraph written report on the group November 4-Schedule Casting for this week or before November 18-Oral Progress Reports December 9-Contest Preparation December 11-Contest
Parts Supplied: four rubber tires front wheel assembly rear wheel assembly electric motor + 2 sets of batteries per group one radio controller per group ( including steering servo and speed control)
Pit stops Parts that have to be interchanged are the radio receiver, electronic speed control, steering servo, and battery pack. The basic rule is that the connection must include the electrical connection and the steering connection. Any variations that would eliminate these would not be allowed.