Presentation on theme: "Environmental Equipment Inc."— Presentation transcript:
1Environmental Equipment Inc. IMR Environmental Equipment, Inc.
2IMR Environmental Equipment, Inc. AgendaWHO WE AREWHAT DO WE DOOUR PRODUCTSWHAT IS OUR FUTUREIMR Environmental Equipment, Inc.
3IMR Environmental Equipment, Inc. Who we areIMR products are well known around the worldIMR was founded in 1984Our main product line is based on the monitoring of flue gasesWe have a strong presence in emerging marketsWe tribe on our long history of excellence and quality productsIMR Environmental Equipment, Inc.
4IMR Environmental Equipment, Inc. Who we areOur products are always based on the latest technologiesThere is not a request for a product specification that we cannot meetOur technical support is among the best in the worldWe are located at: Central AveSaint Petersburg, FL USAIMR Environmental Equipment, Inc.
5IMR Environmental Equipment, Inc. What we doIMR specializes is the custom built of portable flue gas monitoring and stationary CEMS (Continuous Emission Monitoring System)IMR product range goes from single sensor-cell hand-held instruments to multi-channel monitoring systemsIMR uses the latest technology in NDIR an electro-chemical sensors to measure flue-gas concentrationIMR Environmental Equipment, Inc.
6IMR Environmental Equipment, Inc. What do we doWe offer Engineering servicesWe have also created complete mobile measuring laboratories being used around the worldIMR Environmental Equipment, Inc.
7IMR Environmental Equipment, Inc. Our productsIMR2800 SeriesIMR1400 SeriesIMR1440C/FL SeriesIMR1000 SeriesIMR Measuring InstrumentsIMR5000 / IMR400 unitsIMR Environmental Equipment, Inc.
8IMR Environmental Equipment, Inc. Imr2800 seriesLatest sensor technology for more accurate measurement and a longer life timeContinuously and simultaneously measuring up to 18 parameters Can measure the combination following gases CO, O2, NO, SO2, HCl, N2O, CL2, H2, NH3, HC or H2SPrepared for high temperature measurement (up to 2732 °F / 1500 °C)IMR Environmental Equipment, Inc.
9IMR Environmental Equipment, Inc. Imr1400 seriesInexpensive general purpose unitCan be programmed with special fuelsCan hold up to 4 sensorsCan measure the combination following gases CO, O2, NO, SO2, HCl, N2O, CL2, H2, NH3, HC or H2SPrepared for high temperature measurement (up to 2732 °F / 1500 °C)IMR Environmental Equipment, Inc.
10IMR Environmental Equipment, Inc. Imr 1440Fl/COFl SeriesDesigned with a high CO measurement rangeSpecial flexible probe for hard to reach exhaust pipesMeasures air temperature, flue gas temperature, Oxygen O2, Carbon monoxide CO (H2 comp.), Nitric oxide NO, losses, excess air, combustion efficiency, draft, Carbon dioxide CO2 and sootOptional: Soot Meter, RPM Meter, CDA100A KitIMR Environmental Equipment, Inc.
11IMR Environmental Equipment, Inc. IMR1000 seriesThe IMR 1000 is a hand held pocket size stack gas analyzer for combustion tests on boilers, burners, etc. The IMR /IMR have up to two sensors with a 2-line LCD while the IMR /IMR have a 4-line LCD with up to 3 sensorssmall, rugged and easy to operateup to 3 sensorsMemoryInfrared interface for a printerReliable technology and easy to serviceMeasures O2, CO, NO, Draft/pressure, and Stack gas tempCalculates CO2, excess air, efficiency and CO air free(cor. to 0% O2)IMR Environmental Equipment, Inc.
12IMR Environmental Equipment, Inc. IMR1050x SERIESThe IMR 1050X is a hand held pocket size stack gas analyzer for combustion tests on boilers, burners, etc.small, rugged and easy to operateup to 3 sensorsInfrared interface for a printer179 memory positionsCO readings to 1 ppmUser customizable parameters viewMeasures CO, NO, CO2, Inlet Temp/Flue Temp, and Hi-Res Differential ManometerCalculates O2, Efficiency, Net Temp/ Flue, Excess Air, Differential Temp/PressureIMR Environmental Equipment, Inc.
13IMR measuring instrument series CDA100 Combustible gas leak detectorAdjustable tick rateTip Light in sensor cover illuminates the area of the leakAudio and visual tick rateDT301/DT302/DT304 Digital ThermometerTemperature measurement with one (DT301) or two (DT302) inputs or four (DT304) inputsAccepts K, J, T or E thermocouplesTime-stamped multifunction recordDFM3 Thermo AnemometerFree rotating vane wheel ensures highest accuracyDisplays air velocity and temperature simultaneouslyIMR Environmental Equipment, Inc.
14IMR measuring instrument series IX616 Ambient Air Gas DetectorMultiple Gases O2, CO, H2S, CH4High and low alarmsTX450 Temperature Data loggerType K, J, E, and TUp to4 channelsDA75 Dust Emission MonitorContinuous particulate monitor for emission control and arrestment plant performance monitoring.IMR Environmental Equipment, Inc.
15IMR measuring instrument series SOOTMETER Digital Soot ScaleMeasures the soot number from 0.0 to 9.9More reliable than a paper scaleApproximately 100,000 measurements on one set of batteriesRLD10 Refrigerant Leak DetectorAdjustable tick rateAutomatically detects all existing refrigerants and blendsAudio and visual tick rateFor more information regarding our IMR Measuring Instrument Series please visit our website:IMR Environmental Equipment, Inc.
16IMR Environmental Equipment, Inc. The IMR 5000 is a state-of-the-art continuous flue-gas monitoring system, and is designed for a wide variety of flue-gas monitoring applicationsThe IMR 5000 is a stand-alone analyzer that works automatically. The rugged wall mounted enclosure meets NEMA type 4X (IP65) standardsThe modular approach of the IMR 5000 allows one or more gases (up to 8) to be measured simultaneously.The IMR 5000 uses the latest sensor technology from electro-chemical sensors up to NDIR benchesIMR Environmental Equipment, Inc.
17IMR Environmental Equipment, Inc. The system can analyze samples taken from up to 4 different sampling points. This sequential measurement is only possible with the addition of multiple gas sampling and conditioning devices (IMR 400)The IMR 5000 offers various outputs such as a serial interface (RS232/RS485), an analog output (volt / current) and an alarm (relay)All of the above features allow the IMR 5000 to be configured for a variety of applications and can easily be upgraded in the future.IMR Environmental Equipment, Inc.
18IMR Environmental Equipment, Inc. The IMR 400 is a wall-mounted flue-gas dryer, and is designed to prepare flue-gases for a wide variety of gas monitoring applicationsA stand-alone system that works automaticallyThe heated hose keeps the sample hot until it reaches the IMR 400 The system then removes the water vapor with a permeation dryer or a peltier-cooler from the hot sampleIMR Environmental Equipment, Inc.
19IMR Environmental Equipment, Inc. The IMR 400 is designed to prepare flue-gases for the IMR 5000 flue-gas analyzing systemThe IMR 400 is equipped with a 5 ft. (1.5m) heated sample line. This 'heated hose' ensures that the extracted sample does not cool down before it reaches the drying systemIMR Environmental Equipment, Inc.
20IMR Environmental Equipment, Inc. What is our futureWe are expected to expand our customer base to emerging markets like:BrazilChileArgentinaMalaysiaChinaCentral AmericaAnd other emerging or developed marketsIMR Environmental Equipment, Inc.