Presentation is loading. Please wait.

Presentation is loading. Please wait.

0Quit Connecting to a Projector via Video Cable OverviewThis documentation will show how to connect a Tablet PC to the Epson 835p ceiling-mounted LCD projectors.

Similar presentations


Presentation on theme: "0Quit Connecting to a Projector via Video Cable OverviewThis documentation will show how to connect a Tablet PC to the Epson 835p ceiling-mounted LCD projectors."— Presentation transcript:

1 0Quit Connecting to a Projector via Video Cable OverviewThis documentation will show how to connect a Tablet PC to the Epson 835p ceiling-mounted LCD projectors located in all 2006 construction classrooms throughout the building using the physical cable connection. Learning Objective Independently learn how to connect the computer to the LCD projector via the physical video cable. PrerequisitesKnowledge of: The computer desktop and how to operate a remote control. Access to: A Tablet PC, classroom with ceiling mounted Epson 835p projector, monitor cable for connection. Primary Audience Lake Forest Country Day School Faculty and Staff AuthorBrad Cooper, Systems Support Specialist I Keith Gillette, Director of Information Technology Lake Forest Country Day School InstructionsArrows change slides. Print button prints all slides to default printer. Quit exits.

2 1Quit Connecting to a Projector via Video Cable (1/2) 1.Turn on Epson projector remote control by sliding slider switch to right of red Power button toward front of remote 2.Point remote at projector & push the red Power button –The projector will beep –The status light on the projector will begin to flash green –The projector will display auto-setup on the screen 3.Wait for the projector to finish focusing before connecting the cable. (See next slide.) 4.Push the Comp1 source button on projector remote 5.Locate the cable with the Video plug & Audio plug:

3 2Quit 6.Connect the Video connector to the monitor port 7.Connect the Audio plug to the headphone or speaker jack 8.As needed, hold Fn + press & release F4 to cycle through 4 output options: 9.As needed, adjust the Tablet PC & ceiling speaker volume. Connect to Expansion Base or directly to EliteBook 2740p Connecting to a Projector via Video Cable (2/2) HP Ultra-slim Expansion BaseHP EliteBook 2740p direct connection Ceiling speaker remote control

4 3Quit The End! Document Control VersionDate CompleteAuthorDescriptionDate ApprovedApproved By Cooper, BradInitial DraftN/A Gillette, KeithEdited to 2 pagesN/A Cooper, BradCorrected layout and animatoinsN/A Gillette, KeithUpdated for HP EliteBook 2740pN/A Still have a question? Contact the IT Department for further assistance: Call: x222


Download ppt "0Quit Connecting to a Projector via Video Cable OverviewThis documentation will show how to connect a Tablet PC to the Epson 835p ceiling-mounted LCD projectors."

Similar presentations


Ads by Google