2It is also expected that they can give at least six occupational health and safety (OHS) that are related to computer hardware servicing.
3The following are the examples of OHS that is related to computer hardware servicing. Contingency measures during workplace accidents, fire and other emergencies are recognized.Personal protective equipment are correctly used in accordance with organization OHS procedures and practices.Hazard/risks in the workplace and their corresponding indicators are identified to minimize or eliminate risk to co-workers, workplace and environment.Always discharge yourself before touching any part of the computer.Be careful with tools that may cause short circuit.Wear rubber sole shoes when standing on the ground or in a concrete floor.
4The following are the examples of OHS that is related to computer hardware servicing. Always power off and unplug the computer before working on it.When making circuit changes, switch off and unplug the power cord from the equipment then discharge the capacitors. Replace only fuses with those proper rating.Hold the components by the edges and do not touch the IC’s. Read and follow instructions on the manual carefully.Do not use excessive force if things don’t quite slip into place
5Categories and with its tools Work AreaAt least 4 sq. meterTableRubber matExtension wire (220/110 v)Fire extinguisherMaterialsComputer casing (ATX/AT)Motherboard with user’s manualMicroprocessor unitPower supply unitMemory modules (DIMM/SIMM/SDRAM/RDRAM)Video card(PCI, AGP, ISA, Built-in Video Card)LAN card(Built-in, Internal)
6Categories and with its tools Modem (Internal, External)Drives(FDD, HDD, CD-ROM)Data CableAuto Voltage Regulator (AVR)ToolsScrewdrivers (philips and flat)Pliers (long-nose and cutter type)Anti-static protectionMultimeterCable testerLogic probeCrimping toolScoring tool
7Categories and with its tools Side cutterUTP cableCable tieGlovesEquipmentPc system, system unitMonitor/ keyboard/ mousePrinterComputer table and chair