Presentation is loading. Please wait.

Presentation is loading. Please wait.

PIO Setup Brought to you by the SEN Lab at Texas A&M University.

Similar presentations


Presentation on theme: "PIO Setup Brought to you by the SEN Lab at Texas A&M University."— Presentation transcript:

1 PIO Setup Brought to you by the SEN Lab at Texas A&M University

2 Items Needed DB 25 connector cable We use Belkin Pro Series Extension Cable Straight-Through Cable, Male DB25 to Female DB25 $6.99 at CompUSA (product # ) Must be straight pass through with all lines implemented (can test for this with a multimeter) Ribbon cable Parallel printer extension cable with DB 25 Do not use Null modem cable Standard printer cable

3 Items Needed Screw terminal box CIO-MINI37 from Measurement Computing $62.10 Housing box for screw terminal box ENC-MINI37 from Measurement Computing $29.00 Input/output card for DMDX computer PCI-DIO24 from Measurement Computing $80.10 Ribbon cable with female DB 25 on each end to connect IO card to screw terminal box (STB) BP-37F from Measurement Computing $25.00

4 Connecting DB 25 Plug to STB DB 25 Plug #Wire ColorSTB # 1Black w/ white22 2Brown w/ white23 3Red w/ white24 4Red w/ black25 5Orange w/ white26 6Orange w/ black27 7Yellow w/ black28 8Aquamarine29 25Pink w/ black11 Note: colors and numbers will vary with DB 25 connector cables

5 Installation Insert card into free slot in DMDX computer Install InstaCal software that comes with the PCI-DIO24 card Open the software and select the PCI- DIO24 card Run the PIO12 test in TimeDX after selecting the InstaCal 0 PCI-DIO24 card


Download ppt "PIO Setup Brought to you by the SEN Lab at Texas A&M University."

Similar presentations


Ads by Google