Presentation on theme: "1 Amor Nadji January 16-17 2014, SOLEIL, TWIICE 2014 WELCOME TO SOLEIL WELCOME TO SOLEIL."— Presentation transcript:
1 Amor Nadji January 16-17 2014, SOLEIL, TWIICE 2014 WELCOME TO SOLEIL WELCOME TO SOLEIL
OPERATION in 2013 ROCK 98% Photon Beam availability in 2013 : 98% 29 + 2 new beamlines (total of 29) 68 h MTBF : ~68 h 1h23 MTTR : 1h23 January 16-17 2014, SOLEIL, TWIICE 2014 2
5 Modes of Operation for the Users Mode of operationUser Operation in 2013 Ultimate performance achieved Multibunch 430 mA 500 mA Hybrid 425 mA + 5 mA 425 mA + 10 mA 8 bunch 88 mA 110 mA 1 bunch 15 mA 20 mA Low : bunch length and current 4.7 ps RMS and 65 A per bunch < 8 ps FWHM and 10 A per bunch All in Top-up injection 3 5 feedbacks simultaneously in operation: TFB, SOFB, FOFB, BTUNE-FB, Coupling-FB January 16-17 2014, SOLEIL, TWIICE 2014
26 Very Diverse Insertion Devices are installed HU65 HU256 W164 26 installés 1 à venir U18 4 EM Mixte HU640 Légende U20 HU60 HU80HU44 HU60 U20 HU36 HU52 HU80 U20 PM WSV50 U18 U24 HU80HU44 HU52 HU64HU42 January 16-17 2014, SOLEIL, TWIICE 2014
FEMTOSLICING UNDER COMMISSIONING Laser hutch January 16-17 2014, SOLEIL, TWIICE 2014 5 100 – 200 fs FWHM100 – 200 fs FWHM Soft X (Tempo) andSoft X (Tempo) and Hard X-ray (Cristal) Hard X-ray (Cristal) Commissioning withCommissioning with beam will start by beam will start by January 24th. January 24th. Laser at the modulator location
6 In future ring-based light sources (DLSR), the combination of ultra low emittance, high current and narrow chambers will mean that collective effects will be important! January 16-17 2014, SOLEIL, TWIICE 2014 Collective effects phenomena occurring in synchrotron radiation sources include: Beam instabilities Lifetime-limiting effects Ion effects Strongly influence the quality of synchrotron radiation delivered to the users. In view of the high costs in constructing a synchrotron radiation facility, a reduction of the beam quality due to collective effects is not acceptable. Countermeasures have to be considered at an early stage of the machine design.
Your consent to our cookies if you continue to use this website.