Presentation on theme: "2N StarGate PRI GSM Gateway. 2N StarGate 32 GSM channels Up to 256 SIM cards Least cost routing Incoming and outgoing calls routing Optional VoIP support."— Presentation transcript:
2N StarGate PRI GSM Gateway
2N StarGate 32 GSM channels Up to 256 SIM cards Least cost routing Incoming and outgoing calls routing Optional VoIP support Optional 3G support
2N StarGate Over 500,000 minutes/month Not PC based – high stability Compact design and size (3U) Hot swappable GSM boards Front access to boards Only 2 antennas (1 for 16 channels) SMS sending/receiving
How does the GSM Gateway work
GSM Gateway is a device for direct routing of GSM calls through its GSM modules into GSM network. Otherwise, routing of these calls through PSTN network to the GSM network would be much more costly. While using GSM gateway, there is no interconnect fee besides bills from SIM cards, which are used in GSM Gateway. The calls may originate in companys PBX, in alternative carriers networks etc. E1 or VoIP connection to 2N StarGate is supported.
Recommended settings at ISDN side Port:NT** Synchronization:MASTER TEI:0 Port:TE** Synchronization:SLAVE TEI:0 E1 * * EuroISDN interface (Q.931 EDDS1) ** If you set 2N StarGate as NT(MASTER), set switch as TE (SLAVE)
The GSM side GSM network 1 GSM network 2 GSM network 3 Outgoing calls 8 independent outgoing GSM groups CLIP/CLIR features possibility for limitation of minutes Rotating of SIMs by time/random/limit Incoming calls 4 independent incoming GSM groups possibility to REJECT/IGNORE incoming calls present with DISA message/dialling tone passing to switch/VoIP gateway
Outgoing calls settings 1. Assign GSM Modules to GSM groups Every single GSM Module may be assigned to one outgoing group and one incoming group. Incoming and outgoing groups are two different sets of groups. 2. Configure every GSM Group separately Every set of GSM Modules (creating GSM Group) is configured separately. Configuration include CLIP/CLIR options, times of usage, minutes limit etc. 3. Create network lists (one for each GSM network) Every Network list contains list of prefixes, which will be routed together with the same rules. Usually a Network list corresponds with all prefixes for one GSM Network. 4. Define LCR LCR (Least Cost Routing) algorithm assigns GSM Groups to Network lists together with time dependency. In other words it says, through which GSM Modules will be calls routed (according to its prefix).
CDR (Call Data Records) 2N StarGate automatically saves information about every call into its memory (even unsuccessful calls if needed). With latest CPU board you have space for up to 245 thousand lines. In CDR you will find data about every call, which has been connected through 2N StarGate Statistics 2N StarGate automatically generates detailed statistics data on all incoming and outgoing calls.. In Statistics you will find data about number of minutes routed through every GSM module, GSM Group Data records about traffic
1. column: ** 2. column: date/time of start of the call 3. column: type of call -I-FD : Unconnected attempt of incoming call (It will be implemented at higher version of the firmware) -I-OK : Successfully connected incoming call (It will be implemented at higher version of the firmware) -O-FD : Unconnected attempt of outgoing call -O-OK : Successfully connected outgoing call 4. column: CAUSE sent to ISDN 5. column: number of used B-channel/number of used GSM module 6. column: used GSM group 7. column: time of establishing call 8. column: duration of call mmm:ss (max. 255:59) or error cause for unconnected calls 8. column: costs of the call (will be implemented in higher version of firmware) 9. column: called number 10. column: caller number 11. column: number of slot/IMSI* of used SIM card Example of one line in CDR file *with GSM modules GM22(47) IMSI is presented, with TC35 GSM modules serial number of SIM card is presented ** /11:07:53 O-OK CAU-016 aux/g02 GRP-1 0:23 001: / CDR (Call Data Records)
2N STARGATE can be configured and supervised (remotely or locally) using the following connections: locally via an RS232 interface ISDN (or analogue) modem connected to an RS232 interface. An automatic detection of the modem connection and thus automatic modem configuration are a matter of course 10baseT interface - TELNET Inbound B-channel in PRI ISDN connection Easy remote control
2N BlueTower 2N BlueStar Other 2N PRI GSM Gateways
Up to 8 GSM channels – scalable capacity Up to 2 PRI ISDN ports Internal or external antenna splitter Comfortable remote control and maintenance 2N BlueTower
Up to 16 GSM channels Connection to your PBX via PRI ISDN (2x) VoIP interface Internal antenna splitter 2N BlueStar