Presentation on theme: "UNIFORMITY STUDY OF INO ICALS RESISTIVE PLATE CHAMBER BY HARIKRISHNAN.A INO DHEP."— Presentation transcript:
UNIFORMITY STUDY OF INO ICALS RESISTIVE PLATE CHAMBER BY HARIKRISHNAN.A INO DHEP
Introduction Scintillator is a material which emits light(scintillations) when an ionization radiation falls on it. Plastic scintillator are used. PMT(Photo Multiplier Tube)- A device which converts light into electric current. Light guides are used to carry light from scintillator to PMT Discriminator – An electronic circuit which converts analog signal to a digital pulse.
ref1 ref2 Test 2-fold 3 -fold Efficiency= (3-fold/2-fold)*100 Delay is added(15ns) Calculation Of Efficiency Discriminator 1 Discriminator 2 Discriminator 3
Delay: One of the pulse is delayed to decrease time jitter in the coincidence pulse. The threshold for both the reference paddle is set to -25 mV and the test paddle is set as -20 mV
Ref 1 Ref 2 L Test 2-fold 3 -fold Delay is added (15 ns) U Test 3 -fold Delay is added (20 ns) Delay is added (30 ns) Calculation of Operating Point Threshold for all the paddles were set as -25 mV
Efficiency v/s voltage graph of test paddle 1 Voltage (kV) EfficiencyEfficiency
Efficiency v/s voltage graph of test paddle 2 Voltage (kV) EfficiencyEfficiency
Zonal Efficiency Of RPC RPC is placed between two scintillators and will find the efficiency. Our paddles have the area 10cm*10cm. 14 cm Paddle 1 Paddle 2 RPC
6 5 4 3 2 1 0 5432154321 As shown in the figure above, in order to calculate the efficiency, we consider the hits in x strips-0 1 2 3 4 and y strips- 0 1 2 3 4
Your consent to our cookies if you continue to use this website.